Speed Reducers Dealers in Indraprastha Industrial Area, Kota

• Model in 7 sizes from B to H with nominal gear ratios of 5:1, 13:1 and 20:1 • Extended 2 year warranty (optional). • Mounts direct onto the driven shaft: • No alignment problems. • No shaft couplings. • Flexible motor mounted in a convenient position. • No expensive adjustable base plate is required for the motor, as V-Belt tensioning is done by the use of a torque arm which can be simply shortened or extended to swing the shaft mounted speed reducer about its output hub to tension the 'V' -Belts. • Quick and easy speed changing via belt drive. • Final output speed can be very accurately obtained by adjusting the 'V' -Belt' drive ratio. • High efficiency by using helical gears o Single - 98% efficiency. o Double - 96% efficiency. • Anti-run back device can easily be fitted on site. • Most shaft mounted speed reducers use "6000" series I. S. O. plan Taper Roller Bearings, stocked around the world. • Double lip type oil seals used throughout. • Shaft Mount Gear boxes can be mounted in any position. • Proven history of success in all industrial applications; particularly, conveyors & elevators in the construction industry. • Long established and proven drive system. • Wide range of variation available: • Shaft mount, face mount, foot mount, motor mount, hydraulic input, screw conveyor adaptor. • Ultra compact when compared to other designs. • AGNEE offers a full comprehensive repair facility including spares availability

agnee shaft mounted speed reducer (smsr) is one of the most versatile drives offering the largest ratio range and capable of powers up to 280kw. features model in 7 sizes b,c,d,e,f,g,h with nominal gear ratios of 5:1, 13:1 and 20:1 extended 2 year warranty (optional). mounts direct onto the driven shaft: no alignment problems. no shaft couplings. flexible motor mounted in a convenient position. no expensive adjustable base plate is required for the motor, as v-belt tensioning is done by the use of a torque arm which can be simply shortened or extended to swing the shaft mounted speed reducer about its output hub to tension the ‘v’ -belts. smsr video presentation to illustrate internal assembly of gear, shaft, bearings, oil seals, oil level indicator of agnee smsr gearboxes..

The agnee worm gearboxes have cast iron gear case of streamlined design completely air tight, dust proof and capable of being installed in open without any cover. The worm shaft is made of alloy steel, duly hardened and tempered. The worm wheel is made of chill cast phosphorous bronze and teeth accurately generated on gear hobbing machines. They are supported on extra heavy duty taper roller anti friction bearings of ample margin of safety to allow adequate journals as well as thrust loads. Lubrication is effected by splash of oil from the sump. Thus, no special care is required except for occasional oil topping to the required level. Air cooling is effected by means of standard polypropylene or metal fans. Please read the selection of correct worm gearbox for choosing the correct one for your application. They are available in: • vast range of models suit every individual's requirement • some models like c.d. 50, 60, 75, 85, 100 mm, ratio 30:1 or 40:1 are usually available ex-stock or on short notice • center distances from 40 mm to 400 mm • in single or double stage reductions • ratios from 5:1 to 4900:1 • also made as per customer's specifications, drawing, requirements • overhauling of old gear boxes also undertaken, early delivery schedules • adaptable worm gear boxes, range from cd 25mm to 85mm right angle worm gearboxes contain input shafts that are positioned perpendicular to the output shafts. Right angle worm gearbox have up to 98% efficiency levels, and are common in printing presses and glass cutting equipment.

AGNEE Shaft Mounted Speed Reducer (SMSR) is one of the most versatile drives offering the largest ratio range and capable of powers up to 280kW. haft Mounted Speed Reducers (SMSR) are ultra compact when compared to other designs.     Send Enquiry In Stock SMSR Gearboxes AGNEE Shaft Mounted Speed Reducer (SMSR) is one of the most versatile drives offering the largest ratio range and capable of powers up to 280kW.   Features Model in 7 sizes B, C, D, E, F, G, H with nominal gear ratios of 5:1, 13:1 and 20:1 Extended 2 year warranty (optional). Mounts direct onto the driven shaft: No alignment problems. No shaft couplings. Flexible motor mounted in a convenient position. No expensive adjustable base plate is required for the motor, as V-Belt     tensioning is done by the use of a torque arm which can be simply shortened or     extended to swing the shaft mounted speed reducer about its output hub to tension the 'V' -Belts. Quick and easy speed changing via belt drive. Final output speed can be very accurately obtained by adjusting the 'V' -Belt'     drive ratio. High efficiency by using helical gears Single - 98% efficiency. Double - 96% efficiency. Anti-run back device can easily be fitted on site. Most shaft mounted speed reducers (SMSR) use "6000" series I. S. O. plan Taper Roller Bearings, stocked around the world. Double lip type oil seals used throughout in shaft mounted gearbox. Shaft Mount Gear boxes can be mounted in any position. Proven history of success in all industrial applications; particularly, conveyors & elevators in the construction industry. Long established and proven drive system. Wide range of variation available: Shaft mount, face mount, foot mount, motor mount, hydraulic input, screw conveyor adaptor. Shaft Mounted Speed Reducers (SMSR) are ultra compact when compared to other designs. AGNEE offers a full comprehensive repair facility including spares availability for shaft mounted gearboxes.

Features Model in six sizes from B to G with nominal ratios of 5:1, 13:1 and 20:1 Extended 2 year warranty. Mounts direct onto the driven shaft: No alignment problems.No shaft couplings.Flexible motor mounted in a convenient position. No expensive adjustable base plate is required for the motor, as V-Belt     tensioning is done by the use of a torque arm which can be simply shortened or     extended to swing the SMSR about its output hub to tension the 'V' -Belts. Quick and easy speed changing via belt drive. Final output speed can be very accurately obtained by adjusting the 'V' -Belt'     drive ratio. High efficiency by using helical gears Single - 98% efficiency.Double - 96% efficiency. Anti-run back device can easily be fitted on site. Most SMSR use "6000" series I. S. O. plan deep groove ball bearings, stock     around the world. Double lip type oil seals used throughout. Shaft Mounted Speed Reducers can be mounted in any position. Proven history of success in all industrial applications; particularly, conveyors &     elevators in the construction industry. Long established and proven drive system. Wide range of variation available: Shaft mount, face mount, foot mount, motor mount, hydraulic input, screw conveyor adaptor. Ultra compact when compared to other designs. AGNEE offers a full comprehensive repair facility including spares availability.