Water Level Controller Dealers in Dadabari, Kota (1 products available)

A highly sophisticated and reliable Automatic Water Level Controller cum Indicator using state of the art Digital Microcontroller based Technology. “Aqua Mate” is ideally suited for modern homes, apartments, commercial complexes, hotels, hospitals and other places where uninterrupted supply of water is needed and automation is necessary for controlling the motor/pump.“Aqua Mate” have memory to remember the Mode in which it was working and continues to work in the same mode irrespective of power failures.This single Aqua Mate is suitable for all types of pump/motor single phase or three phase as you have or wish to have in future. No, need to change the unit, if you switch over to another type of pump/motor in future. It is suitable for all types of pump/motor fitted to wells, bore wells, Sumps(Ground Tank).First of its kinds in the, “Aqua Mate” have Unique Features which are not available till date in any other Water-Level-Controller.  1. Advanced Sensing Technology:No need for any special metallic or other electrode, just strip the wire and it acts as electrode for years, gives freedom from polarization of electrodes in water.2. Zero-Crossing Change over:     This helps in increases life of switching device many times than conventional systems. It provides Spark Free switching.3. Single systems for:   (I) All type of Motors:      a). Single Phase (up to 1.5HP).      b). Single Phase Submersible having starter without contactor, having MCB & push-button for Start Capacitor.      c). Three Phase/Single Phase Motors having starter with contactor.   (ii) For situation having sump (Ground Tanks) or without it having Boring .4. Four Modes of Operation for convenience as required.a). Auto-Mode: In this mode systems works automatically according to levels and all the fault sensing are active.b). Timer Mode: In this mode system works as above but with added feature of Timer i.e.  If your overhead tank is too big, and takes several hours of continuous run to fill, then in this mode Motor runs for 1hr and rest for 10 mins. to cool down and  continue in this manner, If your Sump is too small, and it is required to trigger frequently, then in this Mode, it gives trigger after each half hour, which makes motor start if overhead tank is not full.c). Manual Mode: In this mode user has to switch on and off the motor.d). Semi-Auto Mode: This mode works exactly as Auto Mode except that faults doesn't make motor off.“Aqua Mate” have memory to remember the Mode in which it was working and continues to work in the same mode irrespective of power failures.5.     Wiring Fault Error:         You can get the Indication and Motor stops if the wiring from overhead tank or sump to controller has been disturbed due to any reason.6. Dry run Protection:        Motor stops if it is not pumping water or running dry, due to any reason, whether it may     be because of no water in sump, or bore, or due to rotor jam, bearing fault ,foot valve Leakage or air blocks in delivery line, etc.7. Protects Motor from High and Low voltages.8. Easy to install.9. Saves water and electricity, protects motor and increases its life.10. Avoids seepage of water from roofs & walls due to overflowing tanks. Ideal for difficult to Access overhead tanks.