Allied Automotive Lalbagh, Lucknow, Uttar Pradesh

3 models are available for testing batteries under charge, while connected to a battery charger or in a vehicle. These compact voltmeters are also useful for testing the charging system of automobiles and motorcycles to detect faulty alternators or regulators.

ELAK Auto Electrical Test Bench is a table model and has been designed to cater to the needs of Auto Electricians, Garages, Services Centers, Transport Corporations, Educational Institutions and other bulk users of Auto Electrical Equipments, for complete testing of Alternator, Regulator and their associated parts. Provision for testing Starter Motors using external battery.

Plaza Solar Panels are one of the most technologically advanced solar PV module manufacturing facility in India. Our ISO 9001-2008 accredited manufacturing plant, located in the Village Katha, Baddi, Solan (HP), boasts of an annual power production capacity of more than 10 MW. We offer a wide range of IEC certified and Tested from MNRE approved Test Centers solar PV modules from 3 Wp to 300 Wp. At Plaza Power & Infrastructure Co. providing complete satisfaction to customers is considered to be our first priority.

ELAK Multi-Battery Chargers are designed for use in workshops, garages, battery service stations and retail outlets, where there is a requirement for charging a number of batteries simultaneously. The Multi-battery chargers are available in 10 different models to charge from 2 to 12 batteries, in series. Models are available from 6 Amps to 20 Amps. These chargers are also known as 'taper chargers' since charging current reduces gradually, as the battery gets charged. However they will not shut-off automatically. A voltmeter or hydrometer is required to check the battery condition periodically and switch off the charger, once the batteries are fully charged.

ELAK Motor-Cycle Battery Testers are designed for testing batteries used in motor-cycles, scooters, ATV's, etc. These testers check the voltage drop of the battery under a fixed load and confirm the status of the battery – full, weak or dead. The new generation motor-cycle and scooters are fitted with an electrical start. It is therefore very essential to test these batteries under load, to ensure that the batteries are capable of starting the vehicle.

Elak Two-Wheeler Battery Chargers are meant for charging batteries used in Motor-Cycles, Scooters, ATV's, etc. 6 Different models are available. 2 models for manual operation and 4 for automatic operation. The 2 models of Manual battery chargers can charge from 4 to 8 batteries, in series. The batteries under charge have to be monitored and dis-connected, once they are fully charged. The Automatic battery chargers can charge battery independently and switch-off, once the batteries are fully charged. These chargers are specially recommended for Maintenance Free batteries which get damaged by over-charging.

Elak Fast chargers and Engine Starters are designed for quick charging an automotive battery, without having to remove it from the vehicle. These chargers are ideal for charging batteries, which get weak due to non-usage of a vehicle in a garage, workshop, showroom, etc. Depending upon the capacity of the battery these chargers can sufficiently charge the weak battery within an hour or two, to start the vehicle. These chargers can also be used for starting vehicles with weak batteries, specially in winters.

The unique Ca-Ca Alloy ensures a maintenance-free life on Indian road conditions. No topping-up within warranty period under normal running conditions. The design makes it completely unspillable and is virtually sealed. Specially designed, flat type single gang plug allows very easy maintenance. Bolted connection eliminates the risk of failure of the soldered wire joints.

Withstands bumps and vibrations: Special polypropylene container with strengthening ribs makes the battery strong enough to withstand severe operating conditions and arduous vibrations in service Made for Indian environment: Use of special Hybrid Alloy System ensures that the battery can withstand the Indian environment and high under-bonnet temperatures Improved cycle life: Double-clad separation in the form of a unique rib-free separator profile, reinforced with texturised glass mat, provides surface support to the active material, thereby improving cycle life and resistance to bumps and vibrations Quick recharge: Unique tree radial grid design, lower internal resistance and a special paste chemistry enhance recharging capability of the battery during use Magic eye: Easy to ascertain the state of the charge as well as electrolyte level of the battery Enhanced safety: Micro-porous filter disc in vent openings help arrest acid fumes and restrict spark propagation inside the battery Leak-resistant design: Side vented lid with electrolyte flow back system reduces chance of electrolyte leakage during handling Maintenance-free: Requires topping up only once in 6 months. Special alloy ensures low water loss during high temperature operations Ready-to-use: Batteries delivered factory-charged in ready-to-use condition

The revolutionary Gas Recombination system eliminates water loss making the battery completely maintenance-free. The spill-proof design guards against the possibility of leakage, even if mounted in a tilted or inclined position. The advanced Lead-Calcium technology leads to low self-discharge. Unique Flame Arrestor ensures greater safety. The AGM construction gives superior cranking power and better resistance to vibration and hence makes this battery the most reliable in the market today. The permanently sealed VRLA battery comes factory-charged. It needs no refilling, electrolyte or water.

High reliability and extended cycle life: Ribbed free polyethylene pocket type separator along with texturised glass mat - double-clad separation protects the design against internal short. Thickplate construction with special paste formulation. Hybrid alloy system for withstanding high ambient operating conditions as prevalent in India. Easy maintenance: FloatFloat Guide to indicate electrolyte level. Bolted type terminals fitted with shroud for easy connection . Instant state-of-charge indication: Magic Eye enables instant state-of-charge indication without having to open the plugs . Clean top with no surface leakage and fumes: Side vented designfitted with micro porous filter disc.

Features of Exide Mileage Red Range of Batteries Robust design - to take care of stringent application requirements Special side vented cover design - excellent spill-resistant characteristics Double clad separation - high reliability and life expectancy ensures customer satisfaction Technology - to suit high temperature applications Appearance - rugged with appealing cosmetics Magic Eye - for determination of electrolyte level and state-of-charge Easy to use - batteries delivered in factory-charged, ready-to-use condition

Maintenance-free batteries with advanced Ca - Ca system Long wet shelf life - no freshening charge required for up to 6 months from date of manufacture Special paste formulation for positive and negative plates - higher life expectancy with superior charge acceptance in service Double-clad polyethylene and glass mat separation - high reliability and longer life Special Omega type cover design fitted with Venturi type chamber cover - excellent spill-resistant characteristics Attractive cosmetics

Unique features and superior technology: Advanced Hybrid Technology that is best suited to withstand the high temperatures prevalent in India Ready-to-use Factory-charged batteries with a polypropylene body, ensures optimum performance in any weather condition. Corner reinforcement ribs added to the rugged design container Corrosion-resistant: Specially designed Radial Positive Grid prevents corrosion, thereby enhancing the life expectancy A dual plate separation (PE + GM) reduces the possibility of premature failure Enhanced safety: Effective fume arrestors are placed on the float assemblies to ensure complete safety. Float assemblies on lid top, for electrolyte level indication are also present in inverter batteries Easy to handle: Moulded handle for 150Ah batteries Reliable Power Back - up for Inverter Batteries Specially designed Cast Radial Negative Grids with a large Surface Area for Inverter Battery Types

Leak-proof, factory-charged battery available for immediate use. Internationally patented design to safeguard tractors from internal short- circuits. Pre-filled and pre-charged, to prevent battery damage from the harmful effects of impure acid and water. Especially designed to increase longevity of tractors. The battery cables and housing are fully protected from acid fumes and rust formation on terminals. Specially created to withstand extreme weather conditions, jolts and shakes. High cranking power enables immediate start-up. Easy to pick and carry since this battery is fitted with strong and rust-resistant handles which retract into place when not in use. Airlock system and side-venting design make these batteries completely leak-proof. Fitted with electrolyte reserve above the plates, this battery is fully maintenance-free.

Tough battery with thicker plates for tough conditions. Made with Exide's Torr Tubular technology. Housed in tall DIN containers. More electrolyte - higher acid volume per ampere hour. Most suitable for deep cycle application. 48 month warranty.

Model : IT400 , IT500 and IT750

More than 20% extra electrolyte which means lesser topping up frequency and better thermal management. Tubular technology. Minimum maintenance. Electrolyte level indicator. Suited for frequent and long power outages. Deep cycle design (800 plus cycles at 80% D.O.D.). Abuse resistant. Faster recharge.

Very low maintenance: Special hybrid alloy system High reliability and extended cycle life: Ribbed free polyethylene pocket type separator along with texturised glass mat - double-clad separation protects the design against internal short. Thickplate construction with special paste formulation. Hybrid alloy system for withstanding high ambient operating conditions as prevalent in India. Easy maintenance: FloatFloat Guide to indicate electrolyte level. Bolted type terminals fitted with shroud for easy connection Instant state-of-charge indication: Magic Eye enables instant state-of-charge indication without having to open the plugs Clean top with no surface leakage and fumes: Side vented designfitted with micro porous filter disc Ready for commissioning: Factory-charged

Presenting Exide Instabrite. The latest offering from Exide that promises superior power backup at a fantastic price. With Exide Instabrite, you can be sure that there will be no shortage of power in your home. Get instant brightness with the best. Get Exide Instabrite. Unique features and superior technology: Advanced Hybrid Technology that is best suited to withstand high temperatures as well as thick plate construction with special paste formulation. Special hybrid alloy system leading to low water loss and dual plate separation(PE+GM) that reduces the possibility of premature failure Easy maintenance: Floatfloat guide to indicate electrolyte level Easy handlingspill-proof: Moulded handles to ensure easy handling.Top vented lid with anti-splash guards fitted with coin flush vent plugs Fume and leak resistant: Spark arrestor fitted in float to restrict fumes and acid during operation. Clean top with no surface leakage Ready for commissioning: Batteries supplied in factory-charged condition

Battery Charging - 3 Nos. Selectable Option:9A11A13A manual battery charging selection sliding switch Powerful LCD Display: To show status on battery voltage. AC Main Volts, Mains Cut and Load Chart on LCD Electrolyte Sensor: A red blinking LED indicates the need for battery topping up Manual Bypass: Toggle Switch available for manual operation Output Socket: Additional output socket on the rear panel is an added input for your emergency need Change Over: Very Fast change over time from UPS to mains and vice versa Compact Surface Mount Technology: Reduce PCB size and this HOME UPS size Battery Charging, Charged, Power ONOFF Indicators

Presenting the new, maintenance free Exide GENPLUS batteries with cutting-edge technology for Genset applications. The extra power-packed Exide GENPLUS batteries come with exclusive features to meet the demanding conditions for Genset applications in the Indian environment and carry a 2 year warranty (when fitted as per the recommended application chart).

A VRLA Gel battery utilizes a one way, pressure-relief valve system and Gelled (immobilized) electrolyte to achieve a recombinant technology. Gelled Electrolyte is formed by addition of silicon dioxide (SiO2) to diluted Sulphuric acid (H2SO4). Fused gelled electrolyte not only acts as electrolytic medium for ion movement but also provides infinite small crevices necessary for recombination reaction. Oxygen normally produced on the positive plate is transported to negative plates through crevices formed in fused gel and it is then absorbed by negative plates. This surpasses the production of hydrogen at the negative plates. Water (H2O) is produced instead, retaining the moisture within the battery. It never needs watering, and should never be opened as this would expose the battery to excess oxygen from air.

Feature : Enhance recharging efficiency.

Rugged Design: Special polypropylene container makes the battery strong enough to withstand severe operating conditions and arduous vibrations during service Special Hybrid Alloy System: Best suited for Indian environment Double Clad Separation: Unique rib-free separator profile, reinforced with texturised glass mat provides surface support to the active material to improve cycle life and resistance to bumps and vibrations Quick Recharge: Unique grid design, lower internal resistance and a special paste chemistry enhance re-charging capability of the battery during use Spark Arrestor - Safety Device: Micro-porous filter disc in vent openings arrest acid fumes and restrict spark propagation inside the battery, enhancing safety Leak-Resistant Design: Side vented lid reduces chance of electrolyte leakage during handling application and keeps the surface of the battery clean

CHAMPION is an automotive battery born to win with unmatched features. It is powered by the latest technology and reinforced through 60 years of development and experience. Unlike the untried and unproven technology of the new entrants in the market, Champion gives you the advantage of extra power that you can rely on. When you have a Champion under your bonnet, there is no stopping you. Made tough for Indian conditions - a special Hybrid Alloy System ensures that the battery can withstand the Indian environment and high under-bonnet temperatures. Polypropylene container with corner reinforcement ribs makes the battery strong enough to withstand bumps and vibrations for all applications Instant start every time - good cranking power and endurance with rugged grid profile. Fully tested and guaranteed to perform even in the most demanding start-stop traffic conditions Brightest light for darkest nights - for driving safely in the dark, without any worries of battery failure Improved cycle life - Double-clad separation in the form of a unique rib-free separator profile, reinforced with texturised glass mat, provides surface support to the active material, thereby improving cycle life and resistance to bumps and vibration