Manual Valve Dealers

3-WAY/3-POSITION (CLOSED CENTER) NON-INTERFLOW MANUAL VALVE WITH POSI-CHECK® Application – Single-acting cylinders. Actuation – Lever operated, detent positioned. Functions – Pos. 1 – Oil is directed from pump to cylinder and “holds” with pump shut off; line to reservoir is blocked. Pos. 2 – All oil is open to reservoir through tank line. Center pos. – Cylinder pressure is held; pump should be shut off. Used on these pumps – P460, PA17, PA46, PA55, PA60, PE17, PE21, PE30, PE46, PE55, PE84, PE90, PE120, PE200, PE400, PQ60 and PQ120 series. 10,000 PSI., 3/8" PORTS, 5 GPM MAX FLOW RATE. NOTE: A Pressure Switch and/or Gauge (Analog or Digital) may be attached if desired. NOTE: Also, valve may be remote mounted with a 9510 Subplates. CAUTION: To prevent sudden, uncontrolled descent of a load as it is being lowered, use a Load Lowering Valve (No. 9596) orCounter Balance Valve (No. 9720) in conjunction with the directional valve used in your application. NOTE: Valves 9501, 9502, 9504 and 9507 can have a port blocked or have a closed center position. When a port is blocked and the valve is shifted to the blocked port, the pump will generated excessive heat. An electric or rotary air pump can either be turned off manually or with a pressure switch. Reciprocating air pumps may be adjusted to stall out and stop. NOTE: Gauge ports monitor pump pressure only, not pressure to the hydraulic cylinder(s). IMPORTANT: Conversion kit 251528 must be used when mounting any of the valves on PA17 or PE17 pumps. IMPORTANT: When ordering any valve for a PE30 or PG30 series pump, ½” longer mounting screws are required. For valves 9502 and 9520, order four 12001 cap screws. For valve 9576, order four 17428 cap screws.

• Size: Standard
• Material: Carbon Steeel
• Application: Water Fitting
• Feature: Casting Approved, Durable
• Type: Multiport
• Pattern: Plain
• Pressure: High

Our company packs the entire range of products with superior-grade packaging material that is nontoxic and recyclable. Furthermore, the packaging prevents damage and ensures the product is kept safe. We, being a customer centric organization, make sure that the transactions are carried out by the professionals so as to avoid any kind of confusion. We sternly maintain payment records for the satisfaction of our clients. Prominent features of Manual Multiport Valves- An ably designed product with multiple features. Manufactured using engineering plastic of the finest quality which is uv and high impact resistant. Made using long lasting spider rings & pressure rings in SS316 l. Simple & smooth handling and an extremely quite operation. Optimal how rates & pressure loss results Manual & easy adaptable for automatic controller. Can be top mounted as well as side mounted. Available sizes & optional accessories- Ranges from 20NB, 25NB, 40NB, 65NB Mounting can be both top and side mount specification. Supplied as Standard The data in the table are tested under the inlet pressure @ 2.0 kg/cm2 and this data is for reference only valve specification is subject of change. The information is based on our present state of knowledge and is intended to provide general notes on products and there uses it should not therefore be, constructed as a guaranteeing specific properties of the products or their suitability for a particular application.

• Material: Mild Steel
• Automatic Grade: Manual
• Type: Pilot Operated Directional Valve
• Country of Origin: India
• Maximum Flow: 70 Kgf/cm2
• Voltage: 240 V
• Max. Operating Pressure: 250 Kgf/cm2
• Max. T-line Back Pressure: 140 Kgf/cm2
• Mass: 1.8 Kg

Manually Operated Directional Valve  These valves may be used to manually shift the spool position and change the direction of oil flow.

• Material: Cast Iron
• Automatic Grade: Manual
• Pressure: High, Low, Medium
• Pressure: 1.0Mpa
• Temperature: 0 degree celsius to +70 degree Celsius
• Surface Finishing: Coated

• Type: Ball Valves
• Application: Water Fitting, Oil Fitting, Gas Fitting
• Color: Available In Many Colors
• Feature: Durable, Casting Approved
• Pattern: Plain
• Material: Carbon Steeel
• Pressure: High, Low, Medium
• Size: 15 To 450 Mm (1/2 To 18inch)

We are known to be among the prime Suppliers of Manual Ball Valve in India. The Manual Ball Valve that we supply is available in various specifications so as to meet the clients requirements. Characteristic Highly durable Low maintenance cost High efficiency East to operate Materials used for making the body valve : Carbon Steel, Chrome-moly Steel, Stainless Steel, Monel, Alloy20, Hastelloy B/C, PP, Teflon etc., Teflon Lined or Teflon Metal Housed.

• Brand Name: NOVA

we are a preeminent manufacturer and supplier of a comprehensive collection of�two piece ball valves, manually operated ball valve. Widely used for common fluid control applications, these ball valves are available in different models. These are available in standard as well as in customized finishes and are ideal for economical automation. The two piece ball valves we offer to clients are known for maximum structural strength, accurate dimension and easy usage features.

We always remain concerned about delivering a flawless range of products and thus we store the entire lot under secured environment till the final dispatch of the orders. Owing to our well-established set-up in Thane(India), we are capable of catering to the requirements of clients with utter ease.

We are primarily engaged in the manufacturing, exporting & supplying of Manual Directional Control Valve in all over the globe. The Manual Directional Control Valve is used to modify the pressure rate in process system. The Manual Directional Control Valve has a temperature range between -25oC to + 60oC. The Manual Directional Control Valve is used in cranes, tippers, dumpers, earthman, dozers, hydraulic power packs, tractor attachments, municipal vehicles, etc. Some Other Applications : TrailersCar CarriesLiftsTrain Clearing MachinesSky LiftsTipper TrucksKnuckle Boom CranesRoad SweeperHydraulic HopperHook LiftTruck mounted CranesAccess PlatformsFire Fighting PlatformsHydraulic Cement Mixers

The hand lever valve are efficient in working without any slightest dysfunction. They are produced by SAMSON in all dimensions and are capable of rugged functioning.  

• Size: Available In Different Sizes
• Pattern: Plain
• Automatic Grade: Manual
• Feature: Durable
• Type: Directional Control Valves
• Finish: Polished

We are offering Manual Slide Gate Valve Manual Chain Slide Gate 150 mm. Up to 300 mm. Use to Food Grains Machinery.

• Operation Type: By Lever
• Country of Origin: Made in India
• Power: Manual
• Pressure: Medium Pressure
• I Deal In: New Only
• Material: Polypropylene
• Application: Water
• Valve Size: 5 - 10 inch
• Valve Port Size: 8.0 inch
• Valve Type: BUTTERFLY VALVE
• Media: Water

Our wide product range also comprises Hand Operated Valves, which are designed and manufactured as per the international standards. These Hand Operated Valves find their wide application in various areas such as for handling slurries, ash, vinegar & molasses treatments in sugar mills and isolation of the flow.

• Material: Forged
• End Connection: Wafer,flanged
• Pressure: Vacuum To High Pressure
• Port Size: DN350
• Power: Pneumatic
• Operator: Electric Actuator, PNEUMATIC, Lever
• Media: Air, Water, Gas, Fuel, Powder/Solids
• Structure: Butterfly

• Size: 1/2 INCH TO 3 INCH
• Material: STAINLESS STEEL
• Color: Silver
• Condition: New
• Brand: LEISTUNG
• Connection Type: Neutral gases and liquids, high purit y , sterile,aggressive or abrasive fluids
• Power: Manual

• Country of Origin: India
• Material: Metal
• Certification: ISO 9001:2008 Certified
• Valve Size: 1inch, 1/2inch, 1.1/4inch
• Specialities: Non Breakable, Casting Approved, Blow-Out-Proof
• Packaging Type: Wooden Box, Carton, Pallets
• Brand Name: Janatics