Sealant Dealers in Lucknow

• Brand: Griffon Tyre Bead Sealer
• THICK BLACK SEALANT: tyre
• bead: sealer
• sealant: griffon

We offer griffon bead sealer that is specially formulated to seal small leaks at the rim and bead area of the tire at time of mounting. it is suitable for use with radial and bias construction tires. • designed to be applied to tire beads during the mounting process. • ideally suited for use with new or old tires. • no drip formula is highly viscous with an extended shelf life. it is a spreadable sealant for sealing leaks caused by ageing or wear on the beads of truck, tractor, em and off-road tyres. bead sealer is applied to the bead and bead seat before the tyre is inflated. When the tyre is inflated, the solid matter contained in the solution is pressed into the uneven areas in such a way that they are sealed. how to use: 1). After the tire has been demounted, check for any damage that may render the tire unusable. 2). Using a clean brush, apply a coat of griffon bead sealer to the bead seat area of the wheel. 3). Mount the tire on the wheel and inflate to recommended air pressure. check for leaks. 4). Allow the tire to sit for about 10 - 15 minutes and recheck for leaks. 5). Close container tightly after use. in other words, the product is applied between the tyre bead and wheel rim then inflated to pressure, excess material which is forced out due to the bead popping out can be washed off with just water as product is totally environmentally friendly. for multi piece wheels the product is also a very effective fitting paste due to the products lubrication properties. The product is applied between the flange and tyre bead, fit the o ring and apply the product between the o ring and flange, fit locking ring and inflate to pressure the product will seal around the bead and o ring to give a very effective seal to last until the tyre is removed. Again excess product washes off with just water. a product of india.

• Brand Name: Fosroc
• Country of Origin: India
• Packaging Size: 6.5ltr
• Application: Joint Filling
• Surface of Application: Metal
• Form: Paste Compound
• Grade: Industrial
• Model Number: 600
• Strength: High
• Material Compatibility: Metal

• Packaging Type: Tube
• Shelf Life: Shelf life is 12 months from the date of manufacturing. } The material should be stored in cool and
• Country of Origin: Made in India
• Brand: Dr Fixit
• Packaging Size: 280 ml
• Application Industry: Jointing, Construction
• Extrusion Rate: For Clear - 200 to 270 g/min For Black - 80 to 120 g/min For White - 100 to 120 min
• Service temperature: - From - 60 to +180oC.
• Plastic deformation: - Up to 95% recovery after plastic deformation
• } UV resistant -: - Good UV resistance & insulation properties.
• Specific gravity: 0.97 - 1.05
• Skinning Time: 7 - 15 min
• Slump test: Nil
• Curing rate: Approximate 24 hrs for 3 mm thickness
• Hardness, Shore A: 10 - 20
• Tensile Strength at break, Kg/cm2: 5 to 10 kg for Clear 8 to 15 for Black & White
• Elongation at break, (%): > 350
• Adhesion / Bond Strength, Kg/2.5 cm: 5 - 6
• Weight loss on heat ageing (%): 8 - 9
• Staining: No staining
• Movement Accommodation Factor (%): +/- 15

• Packaging Type: Bucket
• Country of Origin: Made in India
• Application Area: Plywood
• Brand: Fevicol
• Strength: High

• Brand Name: Fosroc
• Packaging Size: 2.5 litre, Also available in 5 Litre
• Color: Grey
• Packing Type: Tin
• Shelf Life: 12 months from mgf date
• Model Number: Thioflex 600
• Temperature: 5 degree C to 50 degree C
• Curing Time: 4 weeks at 5 degree C, 2 weeks at 15 degree C, 1 week at 25 degree C
• Cure Time: 4 weeks at 5 degree C, 2 weeks at 15 degree C, 1 week at 25 degree C
• Density: 1.60 - 1.65 Kg/ltr
• Flash Point: Over 65 degree C
• Operating Temperature: -20 degree C to +60 degree C
• Pot Life: Min. 2 hrs at 250C
• Setting Time: 72 hours at 5 degree C, 36 hours at 15 degree C, 18 hours at 25 degree C
• Storage: kept in dry conditions between 5 degree C and 27 degree C.
• Water immersion: Thioflex 600 must be fully cured before permanent immersion in water

• Packaging Size: 4 Kg
• Shelf Life: 12 Month
• Storage Temperatures: Between 5 Degree C and Degree C.
• Solid Content: 100 %
• Uses: Expansion joints in floors, Bridge deck joints

• Country of Origin: Made in India
• Brand Name: Good Shine
• Packaging Size: 500 ml
• Packaging Type: Bucket
• Application Industry: Packaging
• Surface Of Application: Wood
• Form: Liquid
• Grade Standard: Industrial
• Strength: High
• Use: Industrial Usage

• Shelf Life: 1 Year
• Brand: Abro
• Usage/Application: Glass
• Lifespan: 1 Year

specialty adhesive sealants, Adhesives, silicon construction sealants

tire sealants

tire sealants, Lighting Products, headlamp glasses, Rubber Profiles

Diamond Tools, Connectors, Temperature Controller, Safety Products, Relay

silicone rubber sealants

Adhesive products, Adhesives

Sealants, Coated Abrasives, Epoxy Adhesive, Shoe Shiner