Bolts Dealers in Partap Nagar, Ludhiana

• Color: Zinc, Golden, Black
• Grade: 4.8, 8.8, 10.9, 12.9
• Brand Name: JFL , Customer specified
• Place of Origin: Punjab, India
• Supply Ability: 100 Ton/Tons per Month

We are dealing best Hub Bolts supplying company.

• Country of Origin: India
• Size: Standard
• Type: Slotted
• Material: Iron, Stainless Steel
• Shape: Round
• Certification: ISI Certified
• Application: Hardware Fitting
• Color: Grey
• Surface Finishing: Polished
• Brand Name: Leo Bolts

This is ms bolt hinge plate type fasteners with special fastening bolts and nuts suitable for conveyor belts 6mm to 18mm thickness available in one meter length. 1.ms 45 bolt hinge plate type comes with (two pcs fastener with bolts and nut and one hinge pin all zinc yellow plated) the offered system – a. offered is metallic clips & tie rod . This works on solid plate hawk type belt fasteners and gets well seated in the clips -rubber covers when tightened. B. Does not require any special lacing tool for making a lacing joint . C. suitable for higher belt ratings . D. available for m-24 , hr & shr belts . E. much lesser time and skill required to make a solid joint. Further these fasteners are the only mechanical fasteners which can be installed with bolts and nut using special tools installation is easy and simple, doesn't require special installation equipment. Using nuts bolts no costly toolings, only a belt hole punch,tightning key spanner,bolt breaker and hammer. Quickly installed = shortened breakdown repair time. Installed by bolts and nuts directly belt is clamped by the fastener itself rubber belts can be repaired and back to work immediately can be installed closer to the carcass after rubber covers are skived off turn fastener upside down for a more leakproof and longlife ease of installation perforated for ease of separation for troughing friendly for the belt with less penetration points may install the pin prior to the fastener installation good compression steel quality 4.6 grade steel zinc galvanized in yellow pasivation packaging in strip up to 01 meters long

• Size: 0-15mm, 15-30mm, 30-45mm, 45-60mm, 60-75mm, 75-90mm, 90-105mm, 400MM
• Material: Iron
• Diameter: 0-10mm, 10-20mm, 20-30mm, 30-40mm, 40-50mm, 50-60mm
• Shape: Rectangular, Round, Square
• Certification: ISO 9001:2008 Certified
• Grade: ANSI, AS, ASME, ASTM, BS, DIN, IBR, IS, JIS
• Color: Black, Golden, Shiny Silver, Silver
• Feature: Accuracy Durable, Hardend & Temper, High Quality, High Tensile
• Technics: Black Oxide, Hot Dip Galvanized, White Zinc Plated, Yellow Zinc Plated
• Brand Name: MK

We wish to inform you that we are manufacturing following elevator euro bucket bolt size as per din 15237. In material grade 4.6. 1. Euro bolt m12x60mm (head dia 42mm)with two pointed prongs.) & cup washer dia 48mm with hex nut 2. Euro bolt m10x50 (head dia 39mm) with four pointed prongs.& cup washer dia 38mm with hex nut 3. .euro bolt m8x40 (head dia 30mm) with four pointed prongs.& cup washer dia 34mm with hex nut. 4. Euro bolt 3/8 x 46mm (head dia 39mm) with four pointed prongs.& cup washer dia 38mm with hex nut 5.elevator bucket bolt :3/8x11/2" 6.elevator bucket bolt :5/16x11/2" 7.elevator bucket bolt :5/16x11/4" 8.elevator bucket bolt :5/16x11/4" 9.elevator bucket bolt :1/4x1" further for stainless steel elevator bucket bolt we can supply following: 1.elevator bucket bolt ss : m8x35mm 2.elevator bucket bolt ss : m8x50mm 3.elevator bucket bolt ss : m10x38mm and 4. oval belt fasteners 3/8" x 2". Ss 5. oval belt fasteners 3/8" x 11/2". Ss 6. oval belt fasteners 5/16" x 11/2". Ss please confirm the length and quantity of each bolt so that we can quote for same accordingly www.premierudyog.org with regards. param vir singh. M/s.premier udyog, 11069/1,street no.- 8, partap nagar,industrial area-b, ludhiana-141003. India. Phones: 91-161-2537541 fax: 91-161-2545377. Cell: +9198140 26062

• Size: 3/4*2.5 Inch
• Material: Steel, Also Available in Iron
• Brand Name: Oslow 
• Type of Bolts: Hex Head

From superior strength to corrosion resistance, we are loading our Anchor Belts with all the benefits that would make them the best fasteners ever. We are one of the distinguished Manufacturers, Exporters, and Suppliers of Anchor Bolts from Punjab, India. In addition, we have defined quality standards for ourselves that successfully match the international level. Ours is an ISO 9001:2008 company that further warrants the supreme deliverance of quality. Besides, we are backed a reliable distribution channel that takes care of the availability of our Anchor Bolts across the globe.

• Country of Origin: India
• Material: Mild Steel
• Diameter: 0-10mm, 10-20mm, 20-30mm
• Thickness: 0-5mm, 5-10mm
• Certification: ISI Certified, ISO 9001:2008 Certified
• Application: Automobiles
• Feature: Accuracy Durable, Auto Reverse
• Surface Finishing: Polished
• Size: 20mm

• Country of Origin: India
• Type: Nut Bolts
• Feature: Fine Coated, Strong Fitting
• Finish: Polished

• Material: Stainless Steel
• Diameter: 0-10mm, 10-20mm, 20-30mm
• Shape: Round
• Thickness: 0-5mm, 10-15mm, 5-10mm
• Application: Automotive Industry
• Color: Silver
• Feature: High Quality, High Tensile

Different types of stainless Steel Bolts are easily available with us in different shapes and sizes. We are a prominent steel bolts manufacturer and industrial steel bolts exporter, originated in India. You will be pleased to know that we offer all kinds of stainless steel bolts at the most rock bottom price.

• Usage:  for joining Elevator Buckets with Belts

We are offering shackle bolt etc. We offer shackle bolt that is widely demanded by the clients, due to its high performance and rust resistance properties. The shackle bolt offered by us can be customized as per the client’s specification.