Carbide Cutting Tools Dealers in Focal Point, Ludhiana

• Grade: En
• Application: Pipe Threading Machine
• Blade material: Carbon Steel
• Surface Finish: Coated
• Quality: Best
• Pack type: Box

Widely used to find out the solutions pertaining to the technical problems faced by the industries, our HSS Threading Chasers are in huge demands. Our High Speed Steel Threading Chasers are resistant to Less wear and tear thus need low maintenance. We are well reckoned as one of the overruling Thread Cutting Chasers Exporters in India.   Technical Specifications : Suitable for Lanco, Landis, Landmatic and Landex Die Heads. All threads available. Available in sizes :  1" x 1/2" 1.1/8" x 5/8" 1.5/8" x 3/4" 2.1/8" x 15/16" 3" x 1.3/64" 4" x 1.3/64" 4" x 1.7/64" 4" x 1.1/4" 4" x 1.1/2" 5" x 1.1/2" 5" x 2.1/4" (Set of 4 Pcs) 5" x 2.1/4" (Set of 6 Pcs) 6" x 2.5/8" (Set of 6 Pcs)

The End Mill Cutter we offer are ideal for shallow cuts and closed grooves. We offer a wide range of End Mill Cutters to suit various applications, made from quality material and ensure that they conform to international quality and precision standards. We are counted amongst some of the top professional manufacturers and suppliers of End Mill Cutters based in Ludhiana, Punjab, India.

Unique three edge rough boring solution from Dia 35mm to 306mm for heavy material removal. Innovative Capto coupling adaptors & extensions to reach higher depths in bores without compromising strength. Trusted over the years, Fine boring units L148C for fine boring needs. Fine boring solution ranging from Dia 3mm to 1275mm Unique anti-vibration fine boring solution for components like Knuckle, Yokes, Differential Housings etc

• Reamer Type: TAPER
• Material: High Speed Steel
• Size: 6MM T0 20MM
• Packaging Size: PLASTIC BOX
• Hardened: 62 HRC
• Features: GOOD QUALITY
• Brand: BOON

We are supported with a rich industry experience and knowledge that assist us in manufacturing and supplying an exclusive range of Indexable Boring Bars. This boring bar is available at several stipulations at nominal rates.The offered product is robustly constructed as per international standards. The use of high grade stainless steel is made for developing this bar. The Boring Bar that we offer has high tensile strength. This bar is widely used in construction sites. In addition, this bar is high abrasion resistant in nature.

• Material: HSS
• Material Grade: SS304

• Model Number: .
• Packaging Details: Wooden packaging (on request)
• Port: MUMBAI
• Supply Ability: AS PER YOUR REQUIREMENT

We are Manufacturers the chaser suit for Lanco, landies, Landmatic, Landex, kandai & Gents, heap Die Head, Wagner, Redilmatic Die head and Also Manufacturer as per customer's requirement as per drawns or sample. Principle Advantages of Tangetial Chasers : Thses are lomg life permanent throat, ability to work, close to a shoulder throughout the life of the chasers and easily altered cutting angle to suit different materials. Tangential to suit different materials. Tangential chasers have a self guiding action, execpt when ground across the entire width of the die or when used with lead screw feed. Regrinding : When dull these chasers are reground only in the cutting edge and never on the throat. The edge is completely renewed at each regrinding so the same results can be obtained from reground. Diameter Threading : One set of chasers can be used to thread different diameter of the same pitch, provided th helix angle of the thread being cut and that of the chasers-holder do not vary more than half a degree above or below for standard thread forms. For accurate work the variation in the lead angle should not be overlooked. Left Hand Threading : The same Chasers can be used for left-hand and Right-hand threads. For left-hand threads the chasers are ground on the end oppsite to that for right hand thread. Left hand chaser holders are required for left hand work and the chaser must be inserted in numerical order, but anticlockwise when facing the diehead .The Machine must be reversed for the lefthand work. Marking on chaser : Each Phoenix Tools tengential chasers is marked. The diameter is not usually marked because the same chaser may be used for the threading different diameter. Type to suit Various materials : This is determined by the cutting edge, known as the Rake Angle, which varies according to the nature of the material to be threaded, its machinability, the thread to be cut and the method of feeding the work into the diehead. The following are given as a guide, but Rake angles should be finally determined by the experiments. Throats : Phoenix Tools Tangential chasers are supplied with one of five standard throats that are 1) 45 (no throat), 2) 30 throat, 3) Standard short throat 20, 4) Long throat15, 5) Extra Long Throat 12,

Parallel Hand Reamers Long Fluted Machine Reamers Parallel Machine Reamers Machine jig Reamers Chucking Reamers with parallel Shank Shell Reamers Shell Core Drills Shell Drills Parallel Shank Socket Hand Reamers Taper Shank Socket Hand Reamers Hand Taper pin Reamers Machine Taper Pin Reamers Counter Bores With Taper Shank. Counter With Parallel Shank Centre Reamers.

• Features: High grade raw material used ,High durability, Long life.

• Feature: Rust Proof
• Brand Name: wellcut tools
• Length: Upto 100 mm

Machine Reamer, CS Hexagonal Die Nut, Machine Tools, Plain Go Gauges

We are offering best Reamers.

We are providing a various types of products such as end mill cutters

• Country of Origin: India
• Type: Toy Accessories
• Thickness: 1-4 Mm
• Application: Making Toys
• Weight: 0.015 kg

LEVER FOR DNMG 1104 INSERT  

Threading Tools, Cutting Tools, Bottom Cup, Swivel Coupler

Threading Tool, Tool, Machine Tool, Cutting Tool, Rolling Machine

Threading Tools, Scaffoldings, Sheet Metal Components, Hand Tools

Threading Cutting Tools, Reamers, Drilling Equipment, Milling Cutting Tools

End Mill Cutters, Adjustable Hand Reamers, Threading Tools

Reamers Drill Bit, Taper Machine Reamer, Taper Pin Reamer, Long Drill Bit