Carbide Cutting Tools Dealers in Ludhiana

Stationed in Ludhiana(India), our company is one of the most sought after entity in the industry. We are comfortable with online and traditional payment methods. Our policies related to payment procedures are transparent. We believe in professionally managing payment agreements.   Features : Easy installation Sturdiness Anti-corrosive

• Type: Reamers
• Material: HSS
• Thickness: 0-10mm, 10-20mm, 20-40mm
• Length: 10-15cm, 15-20cm
• Weight: 10-20gm, 30-40gm, 50-60gm, 70-80gm, 90-100gm
• Feature: Accuracy, Heat Resistance, High Grade, High Strength, Reaming Shell, Rust Proof, Sharp Edge
• Condition: New
• Driven Type: Electric, Hydraulic
• Surface Finishing: Non Coated
• Uses: Industrial Use
• Brand Name: APT
• Country of Origin: India

• Mills Range: 3-30 mm

To keep a strict check on the quality of the products, we have hired professional quality analysts having rich domain experience. Our fast and modern transit facilities enable us to deliver the orders within the stipulated time frame.   We are manufacturing Ground Thread Linco Chasers with best grade of High Speed Steel. Threading of these chasers are done by best quality of oils, grinders and imported machines after proper heat treatment. We also manufacture special / customized chasers as per demand. NPT, BSPT , Left hand , ACME , SQUARE , KNUCKLE Threads, HSS Cobalt M35 , M42 ,M48 chasers are also available with us in plastic box packing. Quality features of SEECO Chasers are: Long life of chasers because of ground thread. Accurate alignment of all 4 pcs/set. Better production and finishing than milled thread chasers. Accurate Depth of each set. Hardness of each set is as per its respective Thread and Working. Zero Breakage of SEECO chasers are one of its best feature. We also provide chasers in coated form.

• Price: Rs 100 / Set
• MOQ: 1 Set

Strong industrial base along with a wide area network, we deliver the range in the stipulated time span. We efficiently cater to the varied demands of the clients and offer them personalized packaging options as well. We ensure that the products are packed sternly using quality packaging material to evade loss. Features : High grade metal Corrosion resistant Dimensionally stable

• Grade: En
• Application: Pipe Threading Machine
• Blade material: Carbon Steel
• Surface Finish: Coated
• Quality: Best
• Pack type: Box

Widely used to find out the solutions pertaining to the technical problems faced by the industries, our HSS Threading Chasers are in huge demands. Our High Speed Steel Threading Chasers are resistant to Less wear and tear thus need low maintenance. We are well reckoned as one of the overruling Thread Cutting Chasers Exporters in India.   Technical Specifications : Suitable for Lanco, Landis, Landmatic and Landex Die Heads. All threads available. Available in sizes :  1" x 1/2" 1.1/8" x 5/8" 1.5/8" x 3/4" 2.1/8" x 15/16" 3" x 1.3/64" 4" x 1.3/64" 4" x 1.7/64" 4" x 1.1/4" 4" x 1.1/2" 5" x 1.1/2" 5" x 2.1/4" (Set of 4 Pcs) 5" x 2.1/4" (Set of 6 Pcs) 6" x 2.5/8" (Set of 6 Pcs)

• Material: Metal
• Color: Grey
• Surface: Polished
• Feature: Rust Proof
• Warranty: 1 Year
• Shape: Rectangle

Techno Crate Engineers is the one stop destination to avail assorted Grooving Products. We are the foremost Exporter, Importer, and Supplier of Grooving Products, catering to the requirements of our global customers. We procure these products from prestigious production houses, where only high grade materials are used in the production process. Under the range of Grooving Products, we specialize in offering Grooving Boring Bars, Grooving Inserts, and Grooving Tool Holders.

• Brand Name: VKI
• Place of Origin: Punjab, India

The End Mill Cutter we offer are ideal for shallow cuts and closed grooves. We offer a wide range of End Mill Cutters to suit various applications, made from quality material and ensure that they conform to international quality and precision standards. We are counted amongst some of the top professional manufacturers and suppliers of End Mill Cutters based in Ludhiana, Punjab, India.

Parallel shank end mill cutters. Taper shank end mill cutters. CRoughers & Finishers. Range: End Mill Cutters are available in the following range: 1.5mm to 28mm. 1/16" to 1.1/4". We also manufacture End Mill Cutters as per customers size & specifications. Surface Treatment: Blued / Nitrated / Tin Coated. End Mill Cutters are manufactured as per Indian/British/DIN/American Standards.

• Material: HSS
• Surface Finishing: Polished
• Grade: M2
• Brand Name: LTC
• Packaging Type: Box
• Rust Proof: Yes

• Material: HSS
• Diameter: 3mm to 30mm
• Features: Sharp corners, Perfect chip, Durability
• Finishing: Polished

Parallel Hand Reamers Long Fluted Machine Reamers Parallel Machine Reamers Machine jig Reamers Chucking Reamers with parallel Shank Shell Reamers Shell Core Drills Shell Drills Parallel Shank Socket Hand Reamers Taper Shank Socket Hand Reamers Hand Taper pin Reamers Machine Taper Pin Reamers Counter Bores With Taper Shank. Counter With Parallel Shank Centre Reamers.

• Model Number: .
• Packaging Details: Wooden packaging (on request)
• Port: MUMBAI
• Supply Ability: AS PER YOUR REQUIREMENT

We are Manufacturers the chaser suit for Lanco, landies, Landmatic, Landex, kandai & Gents, heap Die Head, Wagner, Redilmatic Die head and Also Manufacturer as per customer's requirement as per drawns or sample. Principle Advantages of Tangetial Chasers : Thses are lomg life permanent throat, ability to work, close to a shoulder throughout the life of the chasers and easily altered cutting angle to suit different materials. Tangential to suit different materials. Tangential chasers have a self guiding action, execpt when ground across the entire width of the die or when used with lead screw feed. Regrinding : When dull these chasers are reground only in the cutting edge and never on the throat. The edge is completely renewed at each regrinding so the same results can be obtained from reground. Diameter Threading : One set of chasers can be used to thread different diameter of the same pitch, provided th helix angle of the thread being cut and that of the chasers-holder do not vary more than half a degree above or below for standard thread forms. For accurate work the variation in the lead angle should not be overlooked. Left Hand Threading : The same Chasers can be used for left-hand and Right-hand threads. For left-hand threads the chasers are ground on the end oppsite to that for right hand thread. Left hand chaser holders are required for left hand work and the chaser must be inserted in numerical order, but anticlockwise when facing the diehead .The Machine must be reversed for the lefthand work. Marking on chaser : Each Phoenix Tools tengential chasers is marked. The diameter is not usually marked because the same chaser may be used for the threading different diameter. Type to suit Various materials : This is determined by the cutting edge, known as the Rake Angle, which varies according to the nature of the material to be threaded, its machinability, the thread to be cut and the method of feeding the work into the diehead. The following are given as a guide, but Rake angles should be finally determined by the experiments. Throats : Phoenix Tools Tangential chasers are supplied with one of five standard throats that are 1) 45 (no throat), 2) 30 throat, 3) Standard short throat 20, 4) Long throat15, 5) Extra Long Throat 12,

Hand Reamers : . BS-122(Part II)-1964 & 1S:5444-1978 Machine Reamers : BS-122(Part II)-1964 & 1S:5445-1978 Product Range : (316" to 1") (M6 to M32) Taper Shank Machine Bridge Reamers : BS-122(Part II)-1964 & 1S:5979-1978 Product Range : (14" to 1 14") (M6 to M32)

We are offering hss end mill cutter.

Unique three edge rough boring solution from Dia 35mm to 306mm for heavy material removal. Innovative Capto coupling adaptors & extensions to reach higher depths in bores without compromising strength. Trusted over the years, Fine boring units L148C for fine boring needs. Fine boring solution ranging from Dia 3mm to 1275mm Unique anti-vibration fine boring solution for components like Knuckle, Yokes, Differential Housings etc

• Reamer Type: TAPER
• Material: High Speed Steel
• Size: 6MM T0 20MM
• Packaging Size: PLASTIC BOX
• Hardened: 62 HRC
• Features: GOOD QUALITY
• Brand: BOON

• Material: HSS
• Material Grade: SS304

We are supported with a rich industry experience and knowledge that assist us in manufacturing and supplying an exclusive range of Indexable Boring Bars. This boring bar is available at several stipulations at nominal rates.The offered product is robustly constructed as per international standards. The use of high grade stainless steel is made for developing this bar. The Boring Bar that we offer has high tensile strength. This bar is widely used in construction sites. In addition, this bar is high abrasion resistant in nature.

End mills are the primary cutting tools used in a vertical mill such as the mini-mills we are concerned with. Like drills, they come in a wide variety of styles and quality levels. The most common ones you will need for getting started are 2-flute and 4-flute end mils. You can buy them individually as needed, or in sets.

• Rigid construction: Rigid construction

Drilling, Chamfering, Reaming, Hole Milling,Spot Facing ,Burnishing ,Countersinking, Counter boring.For Steel or harden materials.For aluminum or soft material.

• Feature: Rust Proof
• Brand Name: wellcut tools
• Length: Upto 100 mm

• No.: Capacity in inches
• Hv: 1/4 - 9/32
• Hw: 9/32 - 5/16
• Hz: 5/16 - 11/32
• Hy: 11/32 - 3/8
• H1: 3/8 - 13/32
• H2: 13/32 - 7/16
• H3: 7/16 - 15/32
• H4: 15/32 - 17/32
• H5: 17/32 - 19/32
• H6: 19/32 - 21/32
• H7: 21/32 - 23/32
• H8: 21/32 - 25/32
• H9: 25/32 - 27/32
• H10: 27/32 - 15/16
• H11: 15/16 - 1 1/16
• H12: 1 1/16 - 1 3/16
• H13: 1 3/16 - 1 11/32
• H14: 1 11/32 - 1 1/2
• H15: 1 1/2 - 1 13/16
• H16: 1 13/16 - 2 7/32
• H17: 2 7/32 - 2 3/4
• H18: 2 3/4 - 3 11/32

• Country of Origin: India
• Type: Toy Accessories
• Thickness: 1-4 Mm
• Application: Making Toys
• Weight: 0.015 kg

LEVER FOR DNMG 1104 INSERT  

The company stands tall among the Manufacturers and Exporters of Cutting Reamers in Ludhiana (India). The Cutting Reamers, offered by the company, are available in a wide range from Micro Reamers to Metric Reamers. The Cutting Reamers are known for their reliability and long service life. The Cutting Reamers are useful in a wide range of applications like boring, drilling and facing. Characteristics Of Cutting Reamers Precisely designedDimensional stabilitySuperb finishRust and corrosion resistanceMade from quality raw materials

• Features: High grade raw material used ,High durability, Long life.

• Application: Industrial
• Country of Origin: Made In India
• Brand Name: Poonam Industries
• Material: High Speed Steel
• Length: 5 inch
• Thickness: 4mm
• Width: 3 inch

Machine Reamer, carbide tip reamer, Woodruff Cutters, Tool Bits