Cement Autoclave Dealers

It consists of a stainless steel cylinder with an insulated cover, mounted on a sturdy supporting frame, enclosed in a heat insulated metal housing, attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge, power switches and pilot lamps for controlling the electric heating units. Inside Chamber dimensions: 15 cm dia x 60 cm height, with stainless steel Cylinder (20 kgcm2 pressure capacity) Suitable for operation on 220 V, 50 Hz, Single Phase, AC Supply. Supplied complete with Test Bar Holder, Special Rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner.

• Material: Stainless Steel
• Application: Laboratory Use
• Power: 2000 watts
• Inside Chamber Dimension: 15 Cm Dia X 40.5cm Height.
• Pressure Range: 21 Kg/cm2
• Least Count: 04 kg/cm2
• Temp. Range: 215 Deg C
• Power supply: 230 Volts AC , 15 Amp

silent features: rust proof stainless steel pressure vessel specially designed steam safety valve, pressure control switch and temp. control switch - triple safety precautions for operator safety accurately calibrated pressure gauge guaranteed timings and performance as per is 4031 general description & speci???cations the autoclave is double walled. inner boiler chamber of stainless steel cylinder, with concealed yet easily replaceable heaters surrounding the vessel for quick heating. the boiler lid is of thick stainless steel and can be bolted to the chamber by heavy hexagonal nuts. the silicon gasket, seated in a groove, makes the unit leak proof even at high pressure. the boiler is mounted in between the strong angle iron frame and covered with crc sheet – attractively powder coated. the outer cover can also be of stainless steel at an extra cost. the gap in between the walls is ???lled with thermal insulation to prevent heat loss and energy. the control system

• Brand Name: East India Company
• Material: Mild Steel
• Shape: Vertical
• Usage: Lab&Pharma
• Mount Type: Floor Mounted Autoclave
• Automation Grade: Semi Automatic
•  :  

With stainless steel chamber (21 kgcm.sq. Pressure) The autoclave is suitable for conducting accelerated soundness tests on cements or the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. It consists of a stainless steel cylinder with a welded heat insulated voer, mounted on a sturdy supporting frame, enclosed in a heat insulated metal housing, attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge, power switches and pilot lights for controlling the electric heating units. Inside chamber dimensions - 10.5 cm diameter x 40.5 cm height suitable for operation on 230 v, 50 Hz, Single Phase, A.C.Supply. Supplied complete with test bar holder, special rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner.

• Type: Cement Autoclave
• Material: Carbon Steel, Metal, Mild Steel, Stainless Steel
• Shape: Horizontal
• Certification: ISO 9001:2008
• Color: Golden, Grey-Golden, Metallic, Shiny Silver
• Voltage: 240V
• Condition: New, Used
• Pressure: High Pressure
• Surface Finishing: Polished, Power Coated
• Application: Cement Use
• Feature: Accuracy Durable, Auto Reverse, Corrosion Resistance, Dimensional, Hardend & Temper, High Quality, High Tensile
• Automation Grade: Manual, Semi Automatic

• Country of Origin: India
• Type: Automatic
• Material: Stainless Steel
• Shape: Rectangular
• Certification: CE Certified
• Color: Blue
• Voltage: 220V
• Surface Finishing: Polished
• Phase: Single Phase

It is high pressure autoclave designed especially for conducting acceleraed soundness tests on Cement or the autoclave expansion tests. It is mounted in a sturdy supporting frame, and enclosed in a heat- insulated / metal housing which is attractively finished in hammertone paint.The top has a pressure regulator safety valve and pressure gauge. The unit attached to the side of the housing has power switches and pilot lights for controlling the electric heating unit.

• Material: Metal
• Color: Metallic, Silver
• Application: Industrial
• Surface Finshing: Polished
• Resistivity: Rust Resistant
• Drive Type: Electric

We are instrumental in offering excellent quality Laboratory Cement Autoclave. It is used for conducting accelerated soundness tests on cements. Also, Laboratory Cement Autoclave facilitates the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure.  The Laboratory Cement Autoclave consists of a stainless steel cylinder with a welded heat insulated voer. Control unit of the instrument encloses a sensitive pressure regulator and pressure gauge, power switches and pilot lights for controlling the electric heating units. Further, Laboratory Cement Autoclave is provided with test bar holder.Specifications : Inside chamber dimensions - 10.5 cm diameter x 40.5 cm height Suitable for operation on 230 v, 50 Hz, single phase, ac supply

• Shape: Vertical

We are engaged in manufacturing and exporting a wide range of cement autoclaves. These products includes a stainless steel cylinder with a welded heat insulated voer that is confined in a heat insulated metal housing, mounted on a sturdy supporting frame. In order to control the electric heating units, the attached control unit holds in a sensitive pressure regulator, pressure gauze, power switches and pilot lights. In addition to this, to hold specimens above water level in a vertical position and autoclave, laboratory cement autoclave is offered by us with test bar holder and special rack to expose them in the same manner. Technical specifications: inside chamber dimensions are – 10.5 cm diameter x 40.5 cm height the device is suitable for operation on 230 v, 50 hz, single phase a.c. Supply.

• Capacity: 0-500 (kg/hr)
• Material: Stainless Steel
• Shape: Vertical
• Usage: Industries

It consists of a stainless steel cylinder with an insulated cover, mounted on a sturdy supporting frame, enclosed in a heat insulated metal housing, attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge, power switches and pilot lamps for controlling the electric heating units. Inside Chamber dimensions: 15 cm dia x 60 cm height, with stainless steel Cylinder (20 kg/cm2 pressure capacity) Suitable for operation on 220 V, 50 Hz, Single Phase, AC Supply and supplied complete with Test Bar Holder, Special Rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner.

• Country of Origin: India
• Type: Vertical Autoclave
• Shape: Vertical
• Certification: ISO 9001:2008
• Voltage: 220V
• Condition: New
• Power: 3kw
• Pressure: High Pressure
• Surface Finishing: Polished
• Operating Mode: Automatic
• Brand Name: Saiclave
• Phase: Single Phase
• Warranty: 1 Year
• Mount Type: Floor Mounted Autoclave
• Rust Proof: Yes
• Usage: Laboratory Use
• Specialities: High Tensile, High Quality
• Thickness: 5-10mm
• Weight: 70Kg
• Chamber Volume: 10-15 Litre
• Packaging Type: Wooden Box
• Temperature: 300° C

 Alpha Chem is manufactures,exporter & suppliers Cement Autoclave. Cement Autoclave : These equipments are tested in accordance with the procedures laid down in ASTM C 151 standard where change in the length of the bars (test) of cement is measured for the difference in the size after exposing them to stipulated pressure and temperature for a specific time period.   Feature :   Versatile usage Stainless steel construction Ergonomic Design Energy Efficient Double Safety  Radial Locking Arrangement  Double Safety Valve Protection Hydraulic Testing Upto 2.5 times the working pressure Calibration And Protocol Documentation Working pressure for our standard model cement autoclave is between 60 -350 psi, however this can be upgraded to be used for higher pressures   Pressure Control:   The pressure inside our cement autoclave is controlled through a semi automatic electro mechanical device called piezostat, which controls the pressure inside the chamber and cuts of the current from the heater whenever the pressure exceeds the set pressure value of the autoclave, thus making it very safe and energy efficient. Specification : Wing nut lock locking mechanism for ultimate ease of operation and safety.Conforming to ASTM C151, AASHTO T 107Huger grade spring loaded safety valve of brass., duly chrome plated.High accuracy and reliable pressure gauge.   General Description & Specifications:      The Autoclave is double walled. Inner boiler chamber of stainless steel cylinder, with concealed yet easily replaceable heaters surrounding the vessel for quick heating. The boiler lid is of thick stainless steel and can be bolted to the chamber by heavy hexagonal nuts. The silicon gasket, seated in a groove, makes the unit leak proof even at high pressure. The boiler is mounted in between the strong angle iron frame and covered with CRC sheet – attractively powder coated. The outer cover can also be of Stainless steel at an extra cost. The gap in between the walls is filled with thermal insulation to prevent heat loss and energy. The control system consist of sensitive pressure regulator, pressure gauge, safety valve, temperature control switch, power ON-OFF switch and pilot lights to indicate status of the electric heating units and control switches.   Inside chamber dimensions    10.5 cm dia x 40.5cm height. Rating                                       :    3000 watts Pressure range                           :    21 kg/cm2 Least Count                               :    04 kg/cm2 Temp.range                                :    215 deg C Power supply                              :    230 Volts AC Single Phase 15 Amp   Standard Accessories :     Special rack to hold specimens above water level in the autoclave and in vertical position Pressure gauge with calibration report with national traceability Silicon rubber Gasket Spanner Accessories At Extra Cost:     Length comparator with dial micrometer 0.002mm X 5mm shrinkage bar moulds(single/two/triple gang) PID Auto tuning Digital Temp. indicator cum controller with or without PC interface for data logging PID Auto tuning Digital Pressure indicator cum controller with or without PC interface for data logging Spare heater set Spare Silicon Gasket Spare Pressure gauge Spare safety valve

The Autoclave is suitable for conducting accelerated soundness tests on cements of the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. It consists of a stainless steel cylinder with a weldedheat insulated voer, mounted on a sturdy supporting frame, enclosed in a heat insulated metal housing, attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge, power switches and pilot lights forcontrolling the electric heating units.

Product Description Cement Autoclaves  We are engaged in manufacturing and exporting a wide range of Cement Autoclaves. These products includes a stainless steel cylinder with a welded heat insulated voer that is confined in a heat insulated metal housing, mounted on a sturdy supporting frame. In order to control the electric heating units, the attached control unit holds in a sensitive pressure regulator, pressure gauze, power switches and pilot lights. In addition to this, to hold specimens above water level in a vertical position and autoclave, laboratory cement autoclave is offered by us with test bar holder and special rack to expose them in the same manner. Technical specifications: Inside chamber dimensions are – 10.5 cm diameter x 40.5 cm height The device is suitable for operation on 230 V, 50 Hz, single phase A.C. supply.

The Laboratory Cement Autoclave is suitable for conducting accelerated soundness tests on Cement or the Autoclave expansion test. The equipment meets the requirement of IS: 4031 (P-3). The equipment consists of a Stainless Steel Pressure Vessel with insulated outer shell, fabricated out of high quality Stainless Steel Sheet. The pressure inside the vessel is controlled through a micro processor based PID controller. The equipment is supplied complete with spring loaded safety valve pressure gauge, PID controller with RTD for control of Heater unit.Specification Working Pressure : 21 Kg / cm² ± 1kg / cm² at 215° C Pressure Vessel : ID 150mm X Depth 500 mm Overall Dimensions : 390 mm (L) X 390 mm (W) X 810 mm(H) Weight : 70 Kg Heater : 3000 Watts Supply : 220 V, 50 Hz, 1 phase Panel mounted PID controller with international safety certifications. Product Code: EKE 408-1Standrad: IS : 4031 (Part - 3)Optional Extra EKE 40201 Set of 20, Smooth Reference Points EKE 40501 Set of 20, Knurled and Threaded Reference Points FeaturesRust proof stainless steel pressure vessel & enclosure Microprocessor based PID controller for accurately controlling the temperature & pressureThree fold safety mechanism for the equipment & the operator Reliable sillicon rubber lid sealing gasket. Very Compact

• Type: Pressure Autoclave
• Brand Name: Quality Engineering Corporation
• Place of Origin: Roorkee
• Speciality: High Performace, Durability, Reliability
• Feature: Attached to the side of the housing swtiches, pilot lights for controlling electric heating unit.

Cement Autoclave, offered by us, is a high pressure autoclave designed especially for conducting accelerated soundness tests on Cement or the autoclave expansion tests. It is designed with utmost precision and in compliance with the set industrial norms and standards. It is mounted in a sturdy supporting frame, and enclosed in a heat- insulated / metal housing which is attractively finished in hammer-tone paint. Our Cement Autoclave is widely acclaimed due to its high performance, durability and reliability. We are a prominent Cement Autoclave Manufacturer and Supplier from Uttarakhand, India. We make them available to our customers safely and in a short span of time. Details : The top has a pressure regulator safety valve and pressure gauge. The unit attached to the side of the housing has power switches and pilot lights for controlling the electric heating unit.

• Brand Name: MITRA
• Material: Stainless Steel
• Surface Finishing: Power Coated
• Shape: Vertical
• Color: Grey
• Condition: New
• Power: 1kw
• Pressure: High Pressure
• Usage: Laboratory Use
• Certification: CE Certified
• Voltage: 220V
• Capacity: 50-100 Litre
• Packaging Type: Wooden Box
• Type: Vertical Autoclave
• Weight: 40Kg
• Phase: Single Phase
• Warranty: 1 Year
• Country of Origin: India
• Operating Mode: Automatic