Drinking Water Plants Dealers in Jamalpur, Ludhiana

• Automatic Grade: Automatic

• Application: Treating Hard Water
• Weight: 100-1000kg, 1000-2000kg, 2000-3000kg, 3000-4000kg, 4000-5000kg
• Color: Black, Blue, Grey, Light Green, Light White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic
• Warranty: 1year, 2years
•  Type: Water Softening Plant

we are Known as the Prominent Manufacturer, Exporter, Importer and Supplier of water Distillation Plant. the Company Offers Water Distillation Plant At the Market Leading Prices to the National as Well as International Clients. Our Water Distillation Plant is Known for Its Better Working and Sturdy Construction. description : the Unit is Recommended for Making Pyrogen Free Distilled Water for a Very High Degree of Purity. It is Made Out of Ss Special Kettle Element, Filled with Ejection Device for Safety of the Elements in Provided Water Supply is Stopped. the Cock is Fitted to the Units of Brass C.p.a Wall-mounting Clamp, Which is Provided with the Unit. It is Supplied with Cord and Plug to Work On 220/230 Volts A.c. 5 Liter/hrs Cap. It is Made of Aluminum Joint Less Body.

Northman starts water treatment with boiler water treatment, and more than 15 years ago, we began treating boilers for industry. And that long-term commitment to developing the most innovative boiler water treatment technologies in the industry continues today. It is a result of our desire to improve your competitive advantage and decrease your total operating costs.A single day of lost steam production can cost you much more than the cost for one or two years of our boiler water treatment programs. While our program costs may not significantly impact your bottom line, we understand that our results do, and we are passionate about helping you produce reliable, safe, and cost-effective steam. Successful boiler operation requires a total system approach to:  Prepare feed water before it goes to the boiler  Protect and keep the internal boiler surfaces clean  Maximize condensate return   We can perform detailed system audits and diagnostics in association with our principals who are leaders in water and steam to prescribe the best chemical, steam distribution and service programs to maximize your boiler system performance and efficiency through an effective boiler water treatment program. Through utilizing our innovative programs, we can help you achieve water and energy savings, asset preservation, and increased plant reliability and safety.

• Color: Grey
• Capacity (LPH): 500 LPH
• Phase: 1 Phase
• cleaning system: RO
• Voltage: 240V
• Softener Tank Type: Vertical
• Water Source: Borewell Water
• Water Recovery Rate: 55%
• Regeneration Time: 2.5 Hours
• Frequency: 50 Hz
• Usage: Water Filtration
• Automation Grade: Semi-Automatic
• Material: Mild Steel

The dealkalization of water refers to the removal of alkalinity ions from water. Chloride cycle anion ion exchange dealkalizers remove alkalinity from water. Chloride cycle dealkalizers operate similar to sodium cycle cation water softeners. Like water softeners, dealkalizers contain ion exchange resins that are regenerated with a concentrated salt (brine) solution – NaCl. In the case of a water softener, the cation exchange resin is exchanging sodium (the Na ion of NaCl) for hardness minerals such as calcium and magnesium. A dealkalizer contains strong base anion exchange resin that exchanges chloride (the Cl ion of the NaCl) for carbonate, bicarbonate and sulfate. As water passes through the anion resin the carbonate, bicarbonate and sulfate ions are exchanged for chloride ions. “Higher capacities can be realized by use of type II rather than type I strong base anion resins. Although bicarbonates are not held as tightly as chlorides on the SBA (strong base anion) resins in the hydroxide form, when the resin is predominantly in the chloride form the pH has been raised by a small addition of caustic to the brine regenerant, there will be a favorable exchange of bicarbonate for the chloride. This exchange works well only with high alkalinity waters (40{cd350e8ed0b020edb6c94af9e0746c2c12789e9791b1a8267ad6a864f7f1623c} to 80{cd350e8ed0b020edb6c94af9e0746c2c12789e9791b1a8267ad6a864f7f1623c}), with capacities of 4 to 10 Kg/CF being obtained. The advantages of SBA resin dealkalization is that low-cost salt is used in place of the acid necessary for the SAC (strong acid cation)and un-lined steel tanks can be used   Purpose Dealkalizers are most often used as pre-treatment to a boiler and are usually preceded by a water softener. Alkalinity is a factor that most often dictates the amount of boiler blowdown. High alkalinity promotes boiler foaming and carryover and causes high amounts of boiler blowoff. When alkalinity is the limiting factor affecting the amount of blowdown, a dealkalizer will increase the cycles of concentrations and reduce blowdown and operating costs. The reduction of blowdown by dealkalization keeps the water treatment chemicals in the boiler longer, thus minimizing the amount of chemicals required for efficient, noncorrosive operation. Carbonate and bicarbonate alkalinities are decomposed by heat in boiler water releasing carbon dioxide into the steam. This gas combines with the condensed steam in process equipment and return lines to form carbonic acid. This depresses the pH value of the condensate returns and results in corrosive attack on the equipment and piping. In general, a dealkalizer is best applied to boilers operating below 700 psi (48 bar). In order to justify installation of a dealkalizer on low-pressure boilers, the alkalinity content should be above 50 ppm with the amount of make-up water exceeding 1,000 gallons (approx. 4,000 litres) per day. Cooling system make-up will also benefit from reduced alkalinity. The addition of a dealkalizer to a cooling water system will substantially reduce the amount of acid required to treat the same amount of water.

The effluent treatment plant is designed to treat the effluent coming from different areas of the plant. The treatment of  different effluents varies with the type of effluent.    Oily Water Effluent Treatment  Oily water effluent treatment plant is designed to treat effluent mainly containing oily effluent. The oily water from the  Transformer Area, Turbine building, Workshop etc is collected in common collection sump from where water is  pumped through the Plate Interceptor. Oil separated from Plate Interceptor is collected in drums & clear water is lead  to central monitoring basin through gravity. Sludge generated from the Plate Interceptor is led to the Sludge Pit for  further treatment.    Service Water Effluent Treatment  The system is envisaged for treatment of effluent mainly containing turbidity and suspended solids. Service water  washing effluent from different areas is collected in common collection pit and then pumped to the flash mixer where  chemical mixing takes place. The effluent is dosed with Alum, Lime and Polyelectrolyte to coagulate and flocculate the  suspended / colloidal matter. Water then flows through the flocculation tank for flocculation and is finally carried over to  tube/lamella settler through gravity where clarification of water takes place. Clarified water is then led to common  monitoring basin through gravity. Sludge generated in the process shall be collected and pumped for further treatment    Coal Handling Plant & Coal Storage Effluent Treatment  Effluent from the Coal handling plant and Coal storage Area is collected and is led through the inlet channel to break  the turbulence. The Effluent then flow to the Coal Slurry Settling pond where the discrete particles settle down and the  clear water flows to the coal decanted water sump. Decanted water is then pumped to the central monitoring basin

As process chemistries became more complicated, the wastewaters generated also are becoming more complex and more difficult to treat. At the same time, regulations for discharge to sewer and surface water are becoming more stringent. Most wastewaters, such as waste coolant, have suspended solids in them made up of dirt, metal particles, and other contaminants including oils and chemicals. Because oils and metals react at different pH levels, separate systems for their removal are needed calling for many tanks and large floor space. This is where KleerSEP Emulsion Cracking Systems score. Technology: Using step-by-step separation process , KleerSEP combines the techniques of straining out of bulk solids, coalescing to remove free floating oils, adsorption of microscopic oil, organic matter and smell by carbon treatment, flocculation of oily sludge out of waste water, dewatering of sludge, oxidizing residual oil and dissolved solids and also bacterial disinfection by ozonation, and polishing of output water by micro fiber filter to obtain clear water. Advantages: It is a vertical “high-rise” system needing minimal floor space. Low TCO (Total Cost of Ownership). Easy to operate and maintain. No fine adjustments such as pH and constant monitoring of process .Handles shock loads with ease due to step-by-step contamination elimination process assuring consistent output quality. Better reliability. Less than 5ppm oil and 2.5mg/L of TSS in output water. Totally disinfected and clear water fit for reuse/disposal.

Boiler Water Treatment Plant, R.O Pressure vessels, High presses coupling

Portable Hardness Testing Kit

Boiler Water Treatment Plant, Pollution Control Device Consultancy Service

Industrial Water Treatment Plants, Reverse Osmosis Water Purifier

Pollution Control Board Clearance Service

zinc plants, Rectifiers, Rubber, pvc lined tank

Oil Fired Boiler, Used Boiler, power plant machinery

Plating Barrels, Heaters, Pumps, centrifugal driers