Flange Guards Dealers in Focal Point, Ludhiana

• Type: Flange
• Material: Stainless Steel
• Application: Industrial
• Color: Grey
• Surface Treatment: Polished
• Thread: Full Thread

• Country of Origin: Made in India
• Shape: Round
• Nut Type: Broaching
• Usage/Application: Industrial
• Surface: Polished

We are offering Shafts. Catering to the requirement of tractor owners, we bring a huge assortment of shafts. The shafts are manufactured from quality materials. Our shafts are available in varied sizes. Moreover the shafts are reasonably priced by us. We are a reliable shafts manufacturer, supplier and exporter in ludhiana, punjab. attributes of shafts made as per industry normsmatch international quality standardscompact fabricationsturdy, last longer

Flanges are forged and machined, as per ANSI B-16.5 from the materials ASTM - A105/A105 N, low temperature flanges from ASTM-ASME- SA350 LF2 (Charpy V Notch test as per standard) and stainless steel from S304/S316. Materials conforming to NACE MR-01-75 latest edition.The product range includes SORF,SOFF,BLRF,BLFF ,WNRF(XS, XXS,STD & schedule 40 & 80), SWRF (XS & STD), SWFF (XS & STD), Threaded RF, Threaded FF & LJ.  

Available Size: M-3 to M-16

• Brand Name: Sturdfix

Flange nut- a flange nut is a nut that has a wide flange at one end that acts as an integrated, non-spinning washer. This serves to distribute the pressure of the nut over the part being secured, reducing the chance of damage to the part and making it less likely to loosen as a result of an uneven fastening surface. These nuts are mostly hexagonal in shape and are made up of hardened sheet and often coated with zinc. the flange may be serrated to provide a locking action. The serrations are angled such that they keep the nut from rotating in the direction that would loosen the nut. Because of the serrations they cannot be used with a washer or on surfaces that must not be scratched. The serrations help in preventing the vibration of the nut from moving the fastener, thus maintaining the holding power of nut. the flange nuts are sometimes provided with a swivel flange which helps in creating a more stable structure without affecting finished product like a serrated flange nut. Swivel flange nuts are mostly used in joining wood and plastic. [1] sometimes both faces of the nut are serrated, permitting either side to lock.

• Features: Corrosion resistance, Sturdiness, Fine finish

• Color: Black

• Country of Origin: India
• Type: Three Wheeler Flange
• Material: Stainless Steel
• Application: Automobile Industry
• Grade: En8
• Color: Black, Shiny Silver

• Diameter: As Per Requirements
• Length: As Per Requirements
• Material: Mild Steel
• Certification: ISO 9001:2008 Certified
• Grade: DIN
• Color: Silver
• Technics: White Zinc Plated
• Country of Origin: India
• Application: Corrosion Resistant, Fastener, Machine, Resembling Roofing, Watertight Joints, Wind Power Equipment
• Standard: AISI, ANSI, AS, ASME, ASTM, DIN
• MOQ: As per Requirements
• Name: Nut

• Size: 1/2″ (15 NB) to 48″ (1200NB)
• Dimensions: ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
• Class: 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc
• BS: BS4504 , BS4504, BS1560, BS10
• Flange Face Type: Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)

Material & Grades of Threaded / Screwed Flanges : Stainless Steel Threaded / Screwed Flanges : ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L Duplex & Super Duplex Steel Threaded / Screwed Flanges :  ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61 Carbon Steel Threaded / Screwed Flanges : ASTM / ASME A/SA 105 ASTM / ASME A 350 , ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F706 Low Temperature Carbon Steel Threaded / Screwed Flanges : ASTM A350, LF2, LF3 Alloy Steel Threaded / Screwed Flanges : ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91 Copper Alloy Steel Threaded / Screwed Flanges : ASTM SB 61 , SB62 , SB151 , SB152 UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200 Nickel Alloy Threaded / Screwed Flanges : ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020)

DIN 6923 Flange Nut offered comprise quality finished flange nuts that come with wide flange at one end which provides support as integrated, non-spinning washer and allow optimum distribution of nut pressure over the part being secured.  Further, its superior construction finish also supports reducing chances of damages to part.  Some of its features include hexagonal shape finish; made up of hardened zinc coated steel; choice of serrated flange to provide for locking action; flange nuts can also be offered with swivel flange that helps creation of stable structure.

• Material: EN8 - D
• Size: Ø 73 BEARING

A prominent supplier of huge range of Flange Bolts.

• Material: Cast Iron
• Brand Name: Vira
• Usage/Application: Automotive
• Vehicle Type: Three Wheeler
• Vehicle Model: Bajaj TVS
• Model Name/Number: R4MZA-01
• Size: 8 inch

The very special ambit of flange nuts, hex flange nuts, steel flange nuts etc., is presented by Hamidi Exports. These all are lab tested and up to the Indian and international standards. In addition, we are one of the steel flange nuts manufacturer and supplier based in India.

We are also amongst the Hardware Flange Nuts Manufacturers and suppliers in India. The Flange Nuts are quite robust in their construction and are long lasting in performance. We deliver Hex Flange Nuts at the most competitive price that too timely. They are especially fabricated to meet customers’ diverse requirements.

• Brand Name: JAI
• Place of Origin: LUDHIANA
• Zinc Plated: Auto Black
• 5mm: 12mm

We are offering Flange Nut.

• Application: Automobile Industries
• Material: MS
• Size: Customized

We offer flange nuts.

Aluminum cast head fitted with zinc plated suction tube and Aluminium casted flange. An ideal grease pump for bulk filling of grease gun. Bend spout fitted with loader to fit the filler nipple.

KOVA specialize in production of wide range of Cold & Hot Forged Serrated Flange Nuts. These Nuts are produced with high accuracy to meet the strict dimensional requirements of Automotive Industries. Specifications:- Grade: 8, 10, 12 Finish: Black Oxide, Zinc Plating, Hot Dip Galvanized Features:- High Grade Raw Material Dimensionally Accurate Corrosion & Abrasion Resistant PPAP Requirements

We are well-acclaimed as the most reliable Manufacturer, Exporter and Supplier of Forged Flanges in the market. We have a wide range of Forged Flanges that is available in different sizes and dimensions to meet the client̢۪s demands. These Forged Flanges are manufactured from optimal quality raw materials. Our range of Forged Flanges is highly admired by our esteemed clients for utmost durability. Attributes Sturdy constructionRust freeAvailable in different sizes and dimensionsAffordable price

• Material: MS with brass coating
• Brand Name: Sarang
• Size: 0.125-0.5 inch
• Price Range: Rs. 75-425/-

With ultramodern warehouse and automated warehouse management systems, we carry out excellent supply chain management. This helps us in meeting voluminous requirements. Reckoned for the exceptional Hydraulic Pipe Flange; we are a trustworthy Supplier in this domain. Features : Rugged construction Precision made High grade metal

• Material: 45# Steel / Alloy Steel
• Size: Standard / Customised
• Color: Silver / Golden
• Material: Truck Trailer, LCV, Industrial
• Property: Precisely Machined
• Condition: New

We are a distinguished Manufacturer, Exporter and Supplier of Sintered Flanges from Punjab, India. By utilizing modern tools and machineries, we precisely engineer a wide range of Sintered Flanges in various dimensions and specifications. They are fabricated from high grade metals that we procure from reliable vendors of the domain. We are a noteworthy Sintered Flanges Manufacturer, Exporter and Supplier from Punjab, India. With the help of our sophisticated logistics and transportation, we deliver our Sintered Flanges safely and anywhere in this world.

• Type: Carbon Steel Flanges
• Color: Black
• Application: Industry

Flanges, Rotavator Parts, Gear Coupling

Flange Bolts, Allen Bolts, Hexagonal Bolts