Global Engineering Exports Focal Point, Ludhiana, Punjab

Din:DIN 125 / DIN 126 / DIN 433 / DIN 433 / DIN 6902 / DIN 6903 / DIN 6340 / DIN 7349 / DIN 7989 / DIN 9021 / USS Flat washers / SAE Flat washersFinish: ZINK PLATED STAINLESS STEELSteel is zinc plated for moderate protection against rust. STEEL GRADE 8 WITH YELLOW ZINCMade from medium carbon alloy steel and tempered with yellow zinc plating. Best for applications where high strength and hardness is required. MILD STEEL GRADE 2 CHROMEA grade 2 fastener with a bright mirror-like finish providing sharp looks for a variety of applications. HOT DIPPED GALVANIZEDHot dipped galvanized washers are much more corrosion resistant than zinc plated washers. For exterior and coastal area use.Material:STAINLESS STEEL 18-8Stainless steel 18-8 is an alloy of steel with high corrosion resistance. Stainless has become the material of choice for exterior and most marine applications.  

Material : STAINLESS STEEL 18-8

U-bolts are common bolts that are used for building construction and/or vehicle suspension like leaf springs. Considered one of the major parts of your leaf spring installation, u-bolts will provide a permanent tie between the spring leaves. When describing what a u-bolt is, one can just look at the shape. With a letter U shape, the bolt features two threaded arms. The primary use of the U-bolt is to connect the axle to the leaf spring pack within the suspension system.  

Threaded rods refers to a straight, relatively long metal rod used in a variety of applications and industries ranging from plumbing, electrical, automotive, heavy construction, HVAC, fire sprinklers, telecom and food service.Single end and double end threaded rod are often bent to make specialized fasteners such as anchor bolts and u-bolts. A common type of threaded rod is all thread or fully threaded rod, where the thread extends the complete length of the rod. They are available in a variety of diameters, lengths and finishes. Also sometimes called studs or threaded studs, threaded rod can be cut to desired length using any metal saw. We also deals in construction coil rods etc.     MATERIALS:Low Carbon SteelT304/T316 StainlessASTM A 193 B7BrassAluminumSilicon BronzeFINISHES:Plain/OilClear Zinc PlatedYellow Zinc PlatedHot Dip GalvanizedBlack OxideNickel PlatedTHREADS:Coarse (right & left hand)Fine (right & left hand)MetricAcmeSIZE RANGE:Diameters: 2-56 to 2"Lengths: 1' to 12'Tube Quantities: 1 to 50 depending on diameter

Studs are structural are used in building walls and wall frames. These studs are fully-threaded, and they are made with ASTM A193 Grade B7 Galvanized Steel. Galvanized steel, which undergoes a rigorous chemical process to prevent corrosion, is typically used in the construction of homes. Fully-threaded studs make it possible to build a steel wall frame. Steel fully-threaded studs are straight and resistant to splitting and shrinkage. They are also unaffected by fire, rot, and pests, so they store easily for long periods of time. It's easier to move steel studs when building a wall frame etc. We are also manufacturing Threaded Bars and Thread Rods and coil rods or tie rods for export.Threaded Studs availabel in Style: Fully Threaded; System of Measurement: Inch; Thread Size: 1/2-13; Overall Length (Inch): 2; Material: Low Carbon Steel; Finish/Coating: Zinc-Plated

Global Engineering Exports are the manufacturer of Strut Support Systems Accessories like high quality Steel Pipe Clamps and Casting Pipe Clamps.Low Carbon Steel T304T316 Stainless

Thickness : 2

We offer a wide array of Anchor Expansion Fasteners to choose from. These fasteners are available in various designs and sizes depending on the area of application. Fasteners are mostly used in heavy machinery installation and thus need to be highly resistant to corrosion. Anchor fasteners also need high strength capabilities to facilitate the installation of heavy machinery.

Global Engineering Exports are the manufacturer of Strut Support Systems Accessories like high quality Steel Pipe Clamps and Casting Pipe Clamps. MATERIALS:Low Carbon SteelT304/T316 Stainless FINISHES:Plain/OilClear Zinc PlatedYellow Zinc PlatedHot Dip GalvanizedBlack OxideNickel Plated Sizes Available:  As Above

Material : Low Carbon Steel T304/T316 Stainless

Technics : Plain/Oil Clear Zinc Plated Yellow Zinc Plated Hot Dip Galvanized Black Oxide Nickel Plated

We hold in-depth expertise in providing High Tensile Precision Fastener Nuts that are manufactured using quality material to ensure their durability. These are available in different finishes & sizes and known for their dimensional accuracy, resistance to rust & corrosion. Our range of Hex Nuts Fasteners finds application in automobile, paper, cement and engineering industries.Avail from us a wide range of hex nuts, manufactured using superior quality material. We manufacture our product range as per the international standards. Owing to features like dimensionally accurate, high tensile strength, rust resistant and last for along period, our range is widely appreciated by our clients. Besides, our product range is available in various diameter ranging from M2 to M36 and 3/16 to 1". Moreover, we have the ability of customizing our products.

Diameter : 0-10mm, 10-20mm

Thickness : 0-5mm, 5-10mm

Length : 0-15mm

Grade : ASTM

Color : Silver

L-Bolts are used to attach a plate member to a concrete or masonry foundation, provide anchorage for lightweight post bases, and for general anchorage to concrete. They are packaged with nuts and cut washers. Many building codes require that additional bearing plates be used with the bolt in high wind and high seismic areas; consult local codes.  

J-shaped bolt that can be used in a variety of applications and are made from several different materials. They are most commonly used to suspend electrical wiring and sheet metal from wooden structures as well as in the furniture industry to hold springs.  

J-shaped bolt that can be used in a variety of applications and are made from several different materials. They are most commonly used to suspend electrical wiring and sheet metal from wooden structures as well as in the furniture industry to hold springs.

These hook bolts are designed for marine and other outdoor projects. Hooks are resistant to atmospheric corrosion. Type 304 Stainless Steel, carbonstainless steel (SCM435.40CR.45H)Do NOT use for overhead lifting, support of human weight, athletic or playground equipment. Inspect frequently!Type: OSC Standard: DIN Size: M2.5-8 Surface finish: plain, black oxide, zinc-plated, hot-dipped galvanized Packing: plastic bag in box, boxes in per carton, pallet   Uses: These hook bolts are designed for marine and other outdoor projects. Hooks are resistant to atmospheric corrosion.Material: Type 304 Stainless Steel, carbon/stainless steel (SCM435.40CR.45H)Do NOT use for overhead lifting, support of human weight, athletic or playground equipment. Inspect frequently!  Surface finish: plain, black oxide, zinc-plated, hot-dipped galvanized Packing: plastic bag in box, boxes in per carton, pallet  

Type : : O/S/C

Grade : : DIN

Size : : M2.5-8

Global Engineering Exports are the manufacturer of high quality Strut Channel Nuts, Spring Channel Nuts, Short Spring Channel Nut, Long Spring Channel Nuts, Conical Spring Channel Nuts, Top Spring Channel Nut, Hammer Head Channel Nuts that is precisely designed to provide better gripping power with Strut Channels. We are also manufacturing channel accessories and channel brackets like angle brackets, z brackets, cantilever arms, pipe clamps etc.Channel nuts are manufactured from mild steel bars, and after machining operations are completed, they are case hardened, assuring positive biting action into the inturned edge of the Unistrut channel. The standard channel nut conforms to ASTM A576GR 1015 modified and A1011 SS GR 45.     MATERIALS:Low Carbon SteelT304/T316 Stainless FINISHES:Plain/OilClear Zinc PlatedYellow Zinc PlatedHot Dip GalvanizedBlack OxideNickel Plated Sizes Available:  M6x6, M8x6, M10x8, M12x8, M12x9.5 and M16

Size : M6x6, M8x6, M10x8, M12x8, M12x9.5 and M16

Material : Low Carbon Steel

Finish : Plain/Oil Clear Zinc Plated Yellow Zinc Plated Hot Dip Galvanized Black Oxide Nickel Plated

Channel nuts are manufactured from mild steel bars, and after machining operations are completed, they are case hardened, assuring positive biting action into the inturned edge of the Unistrut channel. The standard channel nut conforms to ASTM A576GR 1015 modified and A1011 SS GR 45.

Global Engineering Exports are the manufacturer of following strut channel accessories: MATERIALS:Low Carbon SteelT304/T316 Stainless FINISHES:Plain/OilClear Zinc PlatedYellow Zinc PlatedHot Dip GalvanizedBlack OxideNickel Plated Sizes Available:  As Above

Global Engineering Exports are the manufacturer of high quality Strut Channel Cantilever Arms, Cantilever Arms Slotted that is precisely designed to provide better gripping power with Strut Channels.Channel nuts are manufactured from mild steel channels, and after machining operations are completed, they are case hardened, assuring positive biting action into the in turned edge of the Unistrut channel. MATERIALS:Low Carbon SteelT304/T316 Stainless FINISHES:Plain/OilClear Zinc PlatedYellow Zinc PlatedHot Dip GalvanizedBlack OxideNickel Plated Sizes Available:  As per above table

Material : Low Carbon Steel T304/T316 Stainless

We offer Hex Head Bolts & Machinery Fasteners that are widely used in automobile, agriculture and electronics industries. These are specially designed keeping in mind the international quality standards and available in various lengths & sizes. Our range of Metal Bolts & Machinery Fasteners is appreciated for their high strength, durability & functionality. Keeping in mind the drawings, specifications, designs, samples and requirements laid down by our clients, we also hold expertise in providing Bolt Fasteners in standardized as well as non standardized forms from cold forging & bar turning.Specifications : Threads: ISO metric (MM Threads) BA threads BSW threads (Inches) UNC & UNF threads Material: Carbon Steel Alloy steel, Stainless Steel Finish: Plain Finish, Zinc plated Yellow plated Hot Dipped Galvanized

Material : Alloy steel, Stainless Steel

They are most commonly used to suspend electrical wiring and sheet metal from wooden structures as well as in the furniture industry to hold springs.

Through Bolt: Suitable for all App. in un cracked concrete. The arrow through bolt has been developed in response to the changing demands of the market in terms of product approval, levels, ease of fixing and product quality. This is a single ring with large wedges with three slits provided with projection to grip the concrete. This is fitted on specially designed tapered cone to grip the concrete. A reliable hold is obtained due to large wedges which expand in three directions. Suitable for Non-Cracked Concrete. Our product range includes Anchor Fasteners, Anchor Bolts, Expansion Fasteners, Expansion Bolts, Drop in Anchors, Through Bolts, Masonry Anchor Bolt etc.Available inMaterial Mild steel white Zinc Passivated 5 micronsMaterial Carbon Steel (Cold forged) yellow with SS304 clipStainless steel AISI-304-A2/AISI-316-A4Cadmium plating on Mild steelApplicationsStructural connections through fixing bracketing. Support angle, cladding restraint steel holding down, Stadium seating, raking, light structures, machinery, safety fences and crashed barriers, steel constructions, railings, consoles, ladders cable trays, machines, staircases, gates, facades, window elements. Fixing back industrial doors, wall, handrails, fabricated stairways, curtain walling system, corrosive environments, stainless steel for ultimate protection in marine, sewage, water treatment, food processing polluted industrial atmosphere and decorative applications and many more applications etc.Anchor Expansion FastenersWe offer a wide array of Anchor Expansion Fasteners to choose from. These fasteners are available in various designs and sizes depending on the area of application. Fasteners are mostly used in heavy machinery installation and thus need to be highly resistant to corrosion. Anchor fasteners also need high strength capabilities to facilitate the installation of heavy machinery.

in terms of product approval, levels, ease of fixing and product quality. This is a single ring with large wedges with three slits provided with projection to grip the concrete. This is fitted on specially designed tapered cone to grip the concrete. A reliable hold is obtained due to large wedges which expand in three directions. Suitable for Non-Cracked Concrete. Our product range includes Anchor Fasteners, Anchor Bolts, Expansion Fasteners, Expansion Bolts, Drop in Anchors, Through Bolts, Masonry Anchor Bolt etc.

Eye bolts have a variety of uses, one of the most common being in the rigging industry, where a steel eye bolt is ideal as an anchor point for many rigging applications.There are several guidelines to remember when using an eye bolt for rigging, anchoring, pulling, pushing or hoisting.-Regular rigging eyebolts should be used for straight line pulls only. For angular lifts, shoulder eye bolts are the better choice.-Always inspect a threaded eye bolt prior to use and make sure the threads and receiving holes are clean.-Never use an anchor eyebolt if the shank or eye has been bent, elongated, or deformed.-The threaded part of eye bolts must protrude through the load so the nut is allowed full engagement of threading. If an eye bolt protrudes too far through the load, you may need to shim the bolt with washers between the nut and the load prior to putting the nut on.