Heat Exchangers Dealers in Chandigarh Road, Ludhiana

• Application: Food Process Industry,Pharmaceutical industry
• Voltage: 240-360 V
• Power Source: Electronic
• Features: Robust design , Perfect strength
• Material: Carbon Steel, Stainless Steel
• Surface Finish: Polished

Association with trusted vendors enabled us to meet the quality expectations of the clients. We source only premium-grade raw materials from the reliable sources after complete checking. We frequently keep a check on the storage space to ensure that it is well-maintained by the experts. We have installed the latest machines and leading technologies to save products from spoiling.

WOODEN COOLING TOWERS This cooling tower is made with wooden structure, fill and louvers. This mechanism is called as induced draft cross flow cooling.The tower structural and supporting sections are Epoxy Coated/ HDG Steel, fastened with zinc plated/ SS fasteners, and suited for hot, harsh and humid atmospheric industrial conditions. This rugged war horse in our stables, incorporate multi blade, cast aluminum, adjustable pitch fan assembly driven by special T.E, IP-55 protected direct drive/ Geared Motor with low R.P.M and higher air discharge capacities.  The standard cladding profile of corrugated asbestos cement sheet or FRP sheet, the joints of which are lapped to minimize water spillage. The Treated Wooden Splash bars, the fill media, are supported on FRP / SS Grids to ensure positive and permanent positioning. The wooden splash bars are of imported pine woods, chemically treated to arrest fungal or algae formations. The design incorporates accommodation of waters with very high TDS factors The hot water from the source when circulated to the collection basin with flower pot nozzles, are sprayed over the fill area. Simultaneously, air is induced through the fill media thus taking away the latent heat from the water passing through the fill media. These towers are generally constructed over RCC sumps designed to accomadate the towers and ensuring adequate air are drawn in to the tower and without escaping else where. Portions of water evaporated, removes the heat from the remaining water. The warm moist air is drawn through the fan deck is discharged to the atmosphere. Cold water, collected at the collection sump, is re-circulated to the heat source. SALIENT FEATURES: The fill media is of imported pinewood with chemically treated . The treated wooden splash bars are supported on FRP/SS Grips to ensure positive and permanent positioning. All other parts of made out of Epoxy Coated/ hot dip galvanized steel, to ensure maximum durability. Compact and Easy maintenance by design Chemically pine wood acts as the fill media and are resistant against fungus and algae and can water with foreign particles Adjustable pitch axial flow, dynamically balanced aluminium fans (LM6)/ PVC/FRP Fan. Fan deck / distribution basin of FRP (Fibre Reinforced Plastics) for durability and strength All joints fastened with zinc/ SS fasteners Uniformity in water dispersion through flower pot target nozzles Capacities 50 TR to 1500 TR , in a single cell Delta T (Temperature drop) 4°C to 20°C, in a single cell ADVANTAGES Eliminates fill media and hence maintenance Used for high temperature applications Used for industries having polluted waters All structural in epoxy coated/ HDG Steel, to arrest rust All joints with zinc / SS fasteners Aero dynamic designed FRP / GI louvers Delta T temperature drop 4 °C to 20 °C, in a single cell Specially designed non clog nozzles to atomize water to mist APPLICATIONS Steel factory and foundry Aluminium die casting machine Air compressors A/C plant & cold rooms Blow  and injection molding machine Chemical industries food processing industries Distilleries and Breweries plants Diesel / Gas Gensets & Megawatt Projects Glass Mfg. Plant Herbal,Aromatics & extraction plants Industries heat process Oil refineries PVC pipes mfg.plant Soap / Cosmetic mfg. industries Steel factory and foundry

• Color: Blue
• Tower Material: Fiberglass
• Supply Phase: Three Phase
• Supply Voltage: 420 V
• Finishing: Powder Coated
• Flow Rate: 3500 m3/hr
• Inlet Temperature: 70 DegreeC
• Height: 9 Feet
• Motor Power: 5.5 HP
• Cooling Capacity: 30 Ton
• Usage/Application: Water Cooling
• Dimension: 5 x 5 feet (W x L)
• Shape: Square (Base)
• Water Pressure: 3 Bar
• Frequency: 50 Hz
• Type of Cooling Tower: Forced Draft Cooling Tower
• Running Weight: 500 Kg

Automated Condensate Transfer Pump.Steam/Air Operated consdensate transfer pump; skid mounted; ASME material of construction; level controlled mechanism; high discharge per stroke; minimum moving parts; minimum downtime; microprocessor based control; built in digital flow indicator with totalizer having non volatile memory; suitable for outdoor installation; not covered under IBR

Offers thermic fluid heaters range :- 1 lac kcal to 50 lacks kcal. Fuel:- Wood,Rice Husk, Agro Waste,Briquettes HSD,BIO GAS FIRED Single Coil & Multiple coils type

• Type: Frp Cooling Tower
• Material: Frp
• Application: Process Cooling, Air Compressors, Plastic Molding Machines
• Weight: 0-100kg, 100-200kg, 200-300kg, 300-400kg, 400-500kg
• Color: Black, Blue, Brown, Grey, Light Green, Light White
• Voltage: 110V, 220V, 380V, 440V.580V
• Condition: New, Used
• Capacity: 0-500L, 1000-1500L, 500-1000L
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic
• Warranty: 1year, 2years
• Temperature: 0-50℃, 50-100℃
• Gauge Thickness: 0-5mm, 10-15mm, 15-20mm, 5-10mm

Hot condensate still contains 20% of the energy you used to make steam in the first place. And since condensate is distilled water, it makes perfect boiler feedwater. Our positive displacement pressure Powered Pump is the heart of a money and energy saving Condensate Return System.The PPPU pumps condensate at 100 oC without electricity, using just a small blast of steam or air pressure, even under vacuum and stall conditions. Due to its sealed & gland-less design, the collected condensate can be pumped immediately, without waiting for it to cool, and with no risk of cavitation Pressure Powered Pumping Packaged Unit (PPPPU) Pressure Powered Pumping Packaged Unit is a positive displacement pump unit operated by steam, compressed air or pressurized gas. The unit is specifically designed to pump hot liquids of specific gravity 1.0 down to 0.9. Condensate Recovery (CRM) is also an integral part of the PPPPU. It is an effective management tool which not only shows the condensate quantity & condensate temperature, but also shows the energy saved through condensate return. Together, this unit is a complete solution to collect condensate, pump it to desired level and destination, to measure the condensate temperature and meter the condensate quantity. PPPPU has to be preceded with properly sized flash vessel depending upon the condensate parameters.  

Alfacool manufactures heat exchanger & condenser in tube & shell design.in the heat exchanger hot water flows in one side & cold water on other side, thus cold water absorbs heat from the hot water.

Tube Sheet, channel cover, generater shaft, Girth Flange, Gear shift lock

Cooling Tower Fills

Aluminum Fin Tubes, Copper Male Female Hinges, Casting Top Cup

wooden cooling towers, suppliers credit services, Leather Jacket, Shirts

Heat Exchanger, Centrifuges, centrifuges machines, Fluid Bed Dryer

Gasketed Plate Heat Exchanger, Spinning Can

Motorcycle Spare Parts, moped, motorcycle rims, Motorcycle Tyres

Cooling Towers, Water Treatment Chemicals

Cooling Tower, Boiler Chemicals, Descaling Chemicals