Heat Exchangers Dealers in Ludhiana

• Type: Heat Exchanger Tube
• Material: Silicon Carbide
• Certification: CE Certified
• Grade: ASTM
• Brand Name: Hexoloy - Saint Gobain

hexoloy sic heat exchanger tubes give you distinct advantages. saint-gobain offers hexoloy silicon carbide chemical process heat exchanger tubing as a superior alternative to tubes made of metals, glass and other materials. hexoloy sic is a single-phase, sintered alpha silicon carbide offering high purity, fine grain size and extremely low porosity. hexoloy sic tubes offer distinct advantages to enhance the performance of shell and tube heat exchangers used in demanding applications from chemical processing to refineries.

• Type: Heat Recovery Systems
• Application: Heat Recovery
• Weight: 100-1000kg
• Color: Grey
• Voltage: 220V
• Automatic Grade: Semi Automatic
• Rated Power: 1-3kw

about product and technology:-   indoor air in home/office often contains significantly more unhealthy pollutants than outdoor air, making it a significant contributor to poor indoor air quality. A mechanical ventilation system (erv/hrv) can be used to improve indoor air quality by exchanging indoor air and brings in fresh air from outside, while second air stream exhaust stale indoor air to the outdoors. It is desirable to maintain the same amount of incoming flow to outgoing air flow. This is referred to as a balance ventilation system and  erv  also transfer both sensible and latent heat between air streams. In a result will not increase heat load of air conditioner.  there are three air filters:-  1. G4 (dust filter) 2. Active carbon filter (for smoke & smell). 3. Hepa (f7), for germs & bacteria. filtration of air before reaching heat exchange core, as a result you get  clean, fresh & healthy air,  oxygen rich indoor, it keep your body ,mind healthy and fresh round the clock. about heat exchange core made of nano –film fiber paper heat exchange core transfer temperature up to 72% efficiency.

Offers thermic fluid heaters range :- 1 lac kcal to 50 lacks kcal. Fuel:- Wood,Rice Husk, Agro Waste,Briquettes HSD,BIO GAS FIRED Single Coil & Multiple coils type

• Application: Food Process Industry,Pharmaceutical industry
• Voltage: 240-360 V
• Power Source: Electronic
• Features: Robust design , Perfect strength
• Material: Carbon Steel, Stainless Steel
• Surface Finish: Polished

Association with trusted vendors enabled us to meet the quality expectations of the clients. We source only premium-grade raw materials from the reliable sources after complete checking. We frequently keep a check on the storage space to ensure that it is well-maintained by the experts. We have installed the latest machines and leading technologies to save products from spoiling.

• Country of Origin: MALAYSIA
• Type: Energy Recovery Ventilator
• Application: Commercial, INDUSTRIAL, RESIDENTIAL & INDUSRIAL

• Type: Frp Cooling Tower
• Material: Frp
• Application: Process Cooling, Air Compressors, Plastic Molding Machines
• Weight: 0-100kg, 100-200kg, 200-300kg, 300-400kg, 400-500kg
• Color: Black, Blue, Brown, Grey, Light Green, Light White
• Voltage: 110V, 220V, 380V, 440V.580V
• Condition: New, Used
• Capacity: 0-500L, 1000-1500L, 500-1000L
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic
• Warranty: 1year, 2years
• Temperature: 0-50℃, 50-100℃
• Gauge Thickness: 0-5mm, 10-15mm, 15-20mm, 5-10mm

• Features: Seamless finish, Dimensional accuracy, Robustness, Rust proof.

Automated Condensate Transfer Pump.Steam/Air Operated consdensate transfer pump; skid mounted; ASME material of construction; level controlled mechanism; high discharge per stroke; minimum moving parts; minimum downtime; microprocessor based control; built in digital flow indicator with totalizer having non volatile memory; suitable for outdoor installation; not covered under IBR

• Color: Blue
• Tower Material: Fiberglass
• Supply Phase: Three Phase
• Supply Voltage: 420 V
• Finishing: Powder Coated
• Flow Rate: 3500 m3/hr
• Inlet Temperature: 70 DegreeC
• Height: 9 Feet
• Motor Power: 5.5 HP
• Cooling Capacity: 30 Ton
• Usage/Application: Water Cooling
• Dimension: 5 x 5 feet (W x L)
• Shape: Square (Base)
• Water Pressure: 3 Bar
• Frequency: 50 Hz
• Type of Cooling Tower: Forced Draft Cooling Tower
• Running Weight: 500 Kg

We are offering best Heat Exchange Pipe.

• Plate material: US304,SUS 316l
• Rubber cushion material: NBR,NBR,EPDM,TP
• Single plate area: 0.05m2, 01m2, 0.16m2, 0.26m2, 0.6m2

We are main supplier of this product.

FRP Cooling Towers are manufactured with Glass reinforced plastic mostly in wind with standing bottle type and square type models. It is a mechanical type Counter Flow Tower. FRP Cooling tower intakes the air from bottom and discharge the waste heat at the top. Since the water is traveling from top and the air passes from bottom to top, the water droplet have more direct contact time with air. The wet cooling Towers are cooled with the help of evaporating some proportionate quantity of cirulating water.   The bottle type tower casing is filled with Honeycomb type PVC FILLS. The rotating water distributor sprinkler is fixed in the top of the inlet pipeline and the same distributes the hot water evenly over the Honeycomb Fill media. The sprinkler will be operated with self-propulsion system. The PVC Fills is corrugated with channels between each flutes to prevent the blockage and giving more and large surface area per unit volume. The cold air meets the cold water at the bottom of the infill providing maximum evaporation and heat transfer in the infill. Finally FRP Cooling Towers are more compact, light in weight, least power consumption, long-lasting, Durable and lowest maintenance expenditure. Since Epoxy Coated / Hot dip galvanized structural and zinc plated fasteners (stainless steel fasteners on extra cost) are used, FRP Towers are corrosion Free. Adjustable pitch, Aluminium [LM-6] or FRP Fan Blades are directly mounted on the Electric motor [IP 55, with Stainless steel shaft, TEFC Special type cooling tower motor] to avoid excess power consumption and unnecessary gear driven problems. All moving parts can be easily approached from top. So easy maintenance is possible. Smaller capacities are factory assembled and just bolting at site is enough. However higher capacities are assembled into the site only to avoid excess transportation cost. Our range includes 10 TR to 500 TR in single cell and multiple cells are used for further capacities.

Hot condensate still contains 20% of the energy you used to make steam in the first place. And since condensate is distilled water, it makes perfect boiler feedwater. Our positive displacement pressure Powered Pump is the heart of a money and energy saving Condensate Return System.The PPPU pumps condensate at 100 oC without electricity, using just a small blast of steam or air pressure, even under vacuum and stall conditions. Due to its sealed & gland-less design, the collected condensate can be pumped immediately, without waiting for it to cool, and with no risk of cavitation Pressure Powered Pumping Packaged Unit (PPPPU) Pressure Powered Pumping Packaged Unit is a positive displacement pump unit operated by steam, compressed air or pressurized gas. The unit is specifically designed to pump hot liquids of specific gravity 1.0 down to 0.9. Condensate Recovery (CRM) is also an integral part of the PPPPU. It is an effective management tool which not only shows the condensate quantity & condensate temperature, but also shows the energy saved through condensate return. Together, this unit is a complete solution to collect condensate, pump it to desired level and destination, to measure the condensate temperature and meter the condensate quantity. PPPPU has to be preceded with properly sized flash vessel depending upon the condensate parameters.  

Motorcycle Spare Parts, Bajaj 2W Spare Parts

We are offering various types of motorcycle spare parts that are available at very reasonable prices.

Alfacool manufactures heat exchanger & condenser in tube & shell design.in the heat exchanger hot water flows in one side & cold water on other side, thus cold water absorbs heat from the hot water.

We offer Industrial Heat Exchanger of premium quality that is used in air conditioning, power plants, chemical plants, natural gas processing, space heating and refrigeration. Industrial Heat Exchanger is manufactured with high-grade raw materials and has longer life span. Our Industrial Heat Exchanger is available at affordable prices. Moreover, Industrial Heat Exchanger, that we offer, has low maintenance cost, high performance, and resistance to corrosion.

Heat Recovery Unit, Trima Cyclone, SCREW FEEDER, oil tank, Fd Fan

Ladle Preheater, Crankcase heater, Air Conditioning Parts

Tube Sheet, channel cover, Girth Flange, Gear shift lock, spacer rings