M. S. Engineers G. T. Road, Ludhiana, Punjab

MSE Tangential Chasers are manufactured from imported High Speed Steel, which passes through exacting metallurgical standard. Experienced heat treatment with the automatic imported heat treatment plant and imported Testing equipments assure that our Tangential Chasers perform satisfactorily in service and produce quality threads within the tolerance for which they are intended.The Tangential Principal of Design :MSE Chasers, designed as per International Threading Standard, provide line contact with the work to provide natural clearance comparable to that of a lathe tool. Friction at the cutting edge, thread distortion and chaser wear are minimized at the tangential location of the chaser, in respect the work plaxes it in a direct line with the cutting action exerted in forming the thread. Rigidly supported in this natural cutting position by the die head chaser holder, the resulting longitudinal absorption of cutting strains reduces vibration and chaser breakage.Depending upon the size of the die head in which they are used, Landies Tangential Chasers vary in length from 1”to 6”.During the re-sharpening process, it is unnecessary to remove the same amount of metal from each chaser in the set. When one chaser is worn. Chipped or damaged to the extent that an abnormal amount of metal must be removed, it can re-grinded and returned to service although much shorter than the other chaser in the set.Die Head Capacity Chaser Section Die Head size 1/4” to 1” Chaser size 3” x 1.3/64 (Set of 4 Pcs)Die Head size 3/8” to 1. 1/2" Chaser size 4” x 1.3/64 (Set of 4 Pcs)Die Head size 1/2” to 2” Chaser size 4” x 1.1/4” (Set of 4 Pcs)Die Head size 1” to 4” Die Head size 1” to 2” Chaser size 4” x 1.1/4” (Set of 4 Pcs) Die Head size 2.1/2” to 4” Chaser size 5” x 2.1/4” (Set of 4 Pcs) Die Head size 2.1/2” to 6” Die Head size 2.1/2” to 3” Chaser size 5” x 2.1/4” (Set of 6 Pcs) Die Head size 3 1/2” to 4” Chaser size 5” x 2.1/4” (Set of 6 Pcs) Die Head size 4.1/2” to 6” Chaser size 5” x 2.1/4” (Set of 6 Pcs) Die Head size 4” to 8” Die Head size 4” to 5.1/2” Chaser size 5” x 2.1/4” (Set of 6 Pcs) Die Head size 5.1/2” to 8” Chaser size 5” x 2.1/4” (Set of 6 Pcs)

Our Scaffolding Pipe Threading Machine is designed using advanced engineering concepts and optimum quality components. Scaffolding Pipe Threading Machine that we offer is immensely accredited for attributes such as sturdy construction, easy operation, low maintenance and long term performance. Our Scaffolding Pipe Threading Machine is available with a lead screw and used for cutting 4 T.P.I.Features : The pillar type pipe threading and end facing machines are best suited for the tube mills, scaffolding equipment manufacturers, small pipe component manufacturers and allied industry. These machines are most robustly and ergonomically designed to give best and long term performances in most sever conditions. This machine is fitted with lead screw arrangement due to which most precise threading are developed and also enhancing the life of die head chasers. The spindle mounted in the headstock is provided with taper roller bearings to carry out the heavy-duty operations and all time accurate and noiseless operations. After long-term use if backlash is found in the bearings then it can be removed with the slight adjustment of check nut and locknut. The surfaces of the pillar guide-ways are grounded and are provided with hard chrome plating for smooth operation and lesser wear and tear during operation. The clamping device is provided with single set of clamps for small 0.D pipes and double set of clamps for greater 0.D of the pipes. The tooth of the clamps are insert type so that when this portion is worn out then only inserts can be easily changed rather than changing the whole of the clamp. For the threading machine the adjustment for the die-head can be done with the single hand operation with the box spanner, which is provided with the die-head.   Details : capacity 20mm to 65mm, motor power 7.5 HP. threading length 400mm, with lead screw arrangement of 4 T.P.I acme thread. Additional Information : Price : 3000 USD min

We are one of the major organizations that deal in extremely efficient Rebar Threading Machine that is widely acknowledged for its high-speed performance and durability. Our Rebar Threading Machine is appreciated for high machining accuracy, easy operation, low breakdown rate and simple operation. Our Rebar Threading Machine is can be applied to substandard threaded steel and it also helps in reducing the labor intensity.   Specifications : capacity 10mm to 40mm, motor power 3HP. capacity 12mm to 65mm, motor power 7.5HP, with lead screw arrangement various threads.

We are providing highly efficient Rebar Upset Forging Machine that is widely used for forging applications. Our Rebar Upset Forging Machine has the capacity of 12mm-40mm rebar, with hydraulic power pack 5 H.P. motor along with maximum pressure of 32 MPA and maximum force of 2500 KN. Our Rebar Upset Forging Machine is known for attributes like sturdy construction, easy operation, low maintenance, etc.   Specifications : capacity 12mm to 40mm rebar size, hydraulic operated automatic, 5HP. motor.Additional Information : Price : 3000 USD min

Rebar Couplers are used for joining the reinforcement bars as these are the perfect solution for splicing when large diameter bars are involved. Our Rebar Couplers are appreciated for features like reduce rebar congestion, improve concrete flow and consolidation. These Rebar Couplers are independent of concrete and known for continuous reinforcement as well as develop strength mechanically. Proven cyclic performance of rebar offers strength during man-made, seismic or other natural events. The continuity of rebar offers excellent provision for grounding electrical current. The simplicity in detailing of reinforcement, particularly in reinforcement congestion zones, minimizes the reinforcement fixing errors as well as the detailing and fixing of seismic reinforcement becomes effortless. Workability with higher steel-to-concrete ratio allows optimum sizing of RCC structural members.   Specifications : parallel threaded couplers for forged rebar, size of rebar 14, 16, 18, 20, 22, 25, 28, 32, 36, & 40mm. Taper Threaded Couplers, rebar size 16, 20, 25, 32, 36 & 40mm.    Price : 3000 USD min

PVC Pipe Threading Machine is widely used for the purpose of threading PVC pipes of different sizes. Our PVC Pipe Threading Machine is manually operated and very simple-to-use. PVC Pipe Threading Machine that we offer has spindle RPM of 60, 101 and 134 (approx.). Our PVC Pipe Threading Machine is appreciated for sturdy construction, low maintenance and longer functional life. Features : The pillar type pipe threading and end facing machines are best suited for the tube mills, scaffolding equipment manufacturers, small pipe component manufacturers and allied industry. These machines are most robustly and ergonomically designed to give best and long term performances in most sever conditions. sic The tooth of the gears in the head stock are most precisely cut on the hear hobbing machine to give noiseless operation and then are undergone for the heat treatment Of flame hardening which leads to the lesser wear tear and hence leads to longer life of the gear. The spindle mounted in the headstock is provided with taper roller bearings to carry out the heavy-duty operations and all time accurate and noiseless operations. After long-term use if backlash is found in the bearings then it can be removed with the slight adjustment of check nut and locknut. The surfaces of the pillar guide-ways are grounded and are provided with hard chrome plating for smooth operation and lesser wear and tear during operation. The clamping device is provided with single set of clamps for small 0.D pipes and double set of clamps for greater 0.D of the pipes. The tooth of the clamps are insert type so that, this portion is worn out then only inserts can be easily changed rather than changing the whole of the clamp. For the threading machine the adjustment for the die-head can be done with the single hand operation with the box spanner, which is provided with the die-head.   Details : capacity 12mm to 65mm, motor power 5 HP., with lead screw arrangement various thteads. capacity 25mm to 100mm, motor power 7.5 HP., with lead screw arrangement various threads. capacity 65mm to 152mm, motor power 10HP., with lead screw arrangement various threads. capacity 100mm to 200mm, motor power 15HP., with lead screw arrangement various threads.    Price : 3000 USD min

We are offering a heavy-duty Semi Automatic Pipe Threading Machine that is widely acknowledged for its durability and high strength. Our Semi Automatic Pipe Threading Machine is an automatic machine that is hydraulic operated and appreciated for its speedy performance. Semi Automatic Pipe Threading Machine that we offer has spindle speed of approx. 25 and 50 RPM.  Features : The pillar type pipe threading and end facing machines are best suited for the tube mills, scaffolding equipment manufacturers, small pipe component manufacturers and allied industry. These machines are most robustly and ergonomically designed to give best and long term performances in most sever conditions. The tooth of the gears in the head stock are most precisely cut on the hear hobbing machine to give noiseless operation and then are undergone for the heat treatment Of flame hardening which leads to the lesser wear tear and hence leads to longer life of the gear. The spindle mounted in the headstock is provided with taper roller bearings to carry out the heavy-duty operations and all time accurate and noiseless operations. After long-term use if backlash is found in the bearings then it can be removed with the slight adjustment of check nut and locknut. The surfaces of the pillar guide-ways are grounded and are provided with hard chrome plating for smooth operation and lesser wear and tear during operation. The clamping device is provided with single set of clamps for small 0.D pipes and double set of clamps for greater 0.D of the pipes. The tooth of the clamps are insert type so that when this portion is worn out then only inserts can be easily changed rather than changing the whole of the clamp. For the end-facing machine the tool adjustment for the various diameters, can be done by single bolt clamping and declamping. For the threading machine the adjustment for the die-head can be done with the single hand operation with the box spanner, which is provided with the die-head.  Additional Information : Price : 3000 USD min

We are offering GI Pipe Threading Machine that features a portable design and offer great flexibility for maximizing the operations of every tube industry. Our GI Pipe Threading Machine is immensely appreciated for attributes like sturdy construction, easy operation, high speed, low maintenance and low power consumption. Our clients can avail GI Pipe Threading Machine at affordable price from us. Features : The pillar type pipe threading and end facing machines are best suited for the tube mills, scaffolding equipment manufacturers, small pipe component manufacturers and allied industry. These machines are most robustly and ergonomically designed to give best and long term performances in most sever conditions. The tooth of the gears in the head stock are most precisely cut on the hear hobbing machine to give noiseless operation and then are undergone for the heat treatment Of flame hardening which leads to the lesser wear tear and hence leads to longer life of the gear. The spindle mounted in the headstock is provided with taper roller bearings to carry out the heavy-duty operations and all time accurate and noiseless operations. After long-term use, if backlash is found in the bearings then it can be removed with the slight adjustment of check nut and locknut. The surfaces of the pillar guide-ways are grounded and are provided with hard chrome plating for smooth operation and lesser wear and tear during operation. The clamping device is provided with single set of clamps for small 0.D pipes and double set of clamps for greater 0.D of the pipes. The tooth of the clamps are insert type so that when this portion is worn out then only inserts can be easily changed rather than changing the whole of the clamp. For the threading machine the adjustment for the die-head can be done with the single hand operation with the box spanner, which is provided with the die-head.   Details : capacity 12mm to 65mm inch, motor power 7.5 HP. capacity 25mm to 100mm, motor power 10 HP. capacity 65mm to 152mm, motor power 15 HP. capacity 100mm to 200mm, motor power 20 HP.   Price :  3000 USD min

Our Pipe End Facing Machine is extensively used for removing the bur of the ends of the pipes in order to make them smooth and aesthetically appealing. Our highly efficient Pipe End Facing Machine is widely acknowledged by the clients owing to its characteristics like sturdy construction, high speed, low power consumption, easy operation, etc. Our Pipe End Facing Machine can be easily used for different diameters of pipes.   Specifications : Capacity 12mm to 65mm, motor power 5HP. Capacity 25mm to 100mm, motor power 7.5HP. capacity 65mm to 152mm, motor power 10HP. capacity 100mm to 200mm, motor power 15HP. Additional Information : Price : 3000 USD min

We are engaged in providing excellent quality Pipe Bevelling Machine such as Automatic Pipe Beveling Machine. Made from high-grade components, our Pipe Bevelling Machine is acknowledged for features like durability, sturdy construction, easy operation, low maintenance and hassle free work performance. Pipe Bevelling Machine is widely demanded for high-speed pipe cutting applications.   Specifications : capacity 12 mm to 65mm, motor power 7.5HP., wall thickness of pipe upto15mm. capacity 25mm to 100mm, motor power 10HP., wall thickness of pipe upto 25mm. capacity 65mm to 150mm, motor power 15HP., wall thickness of pipe upto 35mm. capacity 100mm to 200mm, motor power 20HP., wall thickness of pipe upto 40mm. Additional Information : Price : 3000 USD min