Metal Working Machinery Focal Point, Ludhiana, Punjab

Our product is packed in industrial grade packages that are recyclable and provide protection to the products from physical and chemical damage. Additionally, the product is properly labeled to provide information. The range we offer to the customers are stringently packed and delivered as per the customers' requirement and convenience.

Our payment procedure is not only easy but also safe ensuring your long-term reliance upon us. Whether it is online payment procedure, cash, bank deposits or others, we are here to guide you throughout the process. To easily organize and stack the entire lot of products in our warehouse, we have installed an automated warehousing system. It is supervised by our warehousing experts.   Details : The Pipe Threading Machine is used for Cutting External Thread on Steel Pipe by Chasing method. HSS Tangential Chasers are used as cutters. Pipe remains stationery and Die Head rotates. BSP, MATRIX, BSPT, NPT, UNF,UNC, BSW, Acme Threads can be cut on this machine depending upon the type of Chasers. The machine mainly consists the following : Base Head Stock Saddle Pillar Or Bed Type Clamping Vice Die Head   The Steel Pipe Threading Machines are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirements are combined in this model to from the basic fundamentals of correct threading. All the gears are made of case hardened steel with extra large face with and tooth thickness and cut on hobbing machine for noiseless operation even at high speed. Naturally the are built with high standards of workmanship, material and quality so closely associated with Company Tradition.Design & Workmanship : The National Cutting Tools Steel Pipe Threading Machines are designed to produce quality threads within the to lerance for which they were intended.Head Stock : A heavy duty geared Head Box is of best quality casting providing support to the spindle bearings. The box is of gear type, lubricated, fitted with three extra heavy duty bearings.The Bed : The bed is pillar type having two pillars made of best quality steel nicely finished & duly hard chrome plated in the most modern hard chrome plating unit.The Saddle : The Saddle is fitted on two pillars very precisely. It runs on pillars very smoothly and accurately to the Head Stock alignment.The Apron : The apron gives movement to the saddle with head transfer along with pillars through steel rack and pinion arrangements. It's all gears are made of best quality steel.Vice Jaws : The vice jaws made from the best quality alloy steel are fitted on the saddle well aligned with the head stock center fitted in a heavy duty box type vice. The jaws are heat treated. The movements of jaws are controlled by a screw on the saddle.Range of NCT Steel Pipe Threading Machines and Die Heads : 3/8'' to 1.12'' do/- Capacity Pipe & Bolt 1/2'' to 2'' do/- 1/2'' to 2.1/2'' do/- 1'' to 4'' Capacity Pipe 2.1/2'' to 6'' do/- 4 to 8 do/-

We understand how important packaging is. Therefore, we make sure our products ate packed properly, have smudge-proof labels and are aesthetic to look to lure in more customers. We are backed by a quality control wing that strictly check the lot at all stages right from the production to the final dispatch.

We have a team of professionals who keep their vigil eyes on the entire lot that is stored in the warehouse. This unit keeps the lot free from the factors like duct, rain, sunlight, etc. With the assistance of our secured payment procedures, our clients prefer us all the more. Our transactions support online as well as offline modes.   Features : Corrosion resistance Sturdiness Precision-designed Specifications : Item Unit Cuplock / Ring Lock Supply v 220 Phase Nos. Single Frequency Hz. 60 Speed RPM 2 to 10 Motor Drive TYPE AC Inverter Motor TYPE 3-Phase Torch Clamping Type Pneumatic Length Adjustability mm 150 to 2400 Dimensions LxWxH 11.3 x 2.5 x 5.3 (Foot) Yes! I am interested

Backed by efficient logistics team, we make deliveries of the goods in the set time span. We are a quality-centralized firm and make use of only high quality material for manufacturing the offered lot. Also, we ensure that the material is sourced from the reliable places.   Details : The Rod Threading Machine is used for Cutting External Thread on Rod by Chasing method. HSS Tangential Chasers are used as cutters. Rod remains stationery and Die Head rotates. BSP, MATRIX, BSPT, NPT, UNF,UNC, BSW, Acme Threads can be cut on this machine depending upon the type of Chasers. The machine mainly consists the following : Base Head Stock Saddle Pillar Type Or Bed Type Clamping Vice Die Head   The Rod Threading Machines are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirements are combined in this model to from the basic fundamentals of correct threading. All the gears are made of case hardened steel with extra large face with and tooth thickness and cut on hobbing machine for noiseless operation even at high speed. Naturally the are built with high standards of workmanship, material and quality so closely associated with Company Tradition.Design & Workmanship : The National Cutting Tools Rod threading machines are designed to produce quality threads within the to lerance for which they were intended.Head Stock : A heavy duty geared Head Box is of best quality casting providing support to the spindle bearings. The box is of gear type, lubricated, fitted with three extra heavy duty bearings.The Bed : The bed is pillar type having two pillars made of best quality steel nicely finished & duly hard chrome plated in the most modern hard chrome plating unit.The Saddle : The Saddle is fitted on two pillars very precisely. It runs on pillars very smoothly and accurately to the Head Stock alignment.The Apron : The apron gives movement to the saddle with head transfer along with pillars through steel rack and pinion arrangements. It's all gears are made of best quality steel.Vice Jaws : The vice jaws made from the best quality alloy steel are fitted on the saddle well aligned with the head stock center fitted in a heavy duty box type vice. The jaws are heat treated. The movements of jaws are controlled by a screw on the saddle.Range of NCT Threading machines and Die Heads : 3/8'' to 1.12'' do/- 1/2'' to 2.1/2" do/-

Our product is packed in industrial grade packages that are recyclable and provide protection to the products from physical and chemical damage. Additionally, the product is properly labeled to provide information. We are backed with advanced logistics services owing to which we are flexible in delivering the product range of time and with utmost safety.

Buyers can rely on us for the best in line products as we prepare them using the finest grade raw material and modern techniques. Also, the basic material is sourced from the reliable places. Our organization is avidly engaged in supplying an exclusive range of PVC Pipe Threading Machine at reasonable prices.   Details : The Pipe Threading Machine is used for Cutting External Thread on Steel Pipe by Chasing method. HSS Tangential Chasers are used as cutters. Pipe remains stationery and Die Head rotates. BSP, MATRIX, BSPT, NPT, UNF,UNC, BSW, Acme Threads can be cut on this machine depending upon the type of Chasers. The machine mainly consists the following : Base Head Stock Saddle Pillar Or Bed Type Clamping Vice Die Head The PVC Pipe Threading Machines are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirements are combined in this model to from the basic fundamentals of correct threading. All the gears are made of case hardened steel with extra large face with and tooth thickness and cut on hobbing machine for noiseless operation even at high speed. Naturally the are built with high standards of workmanship, material and quality so closely associated with Company Tradition. Design & Workmanship : The National Cutting Tools PVC Pipe Threading Machines are designed to produce quality threads within the to lerance for which they were intended. Head Stock : A heavy duty geared Head Box is of best quality casting providing support to the spindle bearings. The box is of gear type, lubricated, fitted with three extra heavy duty bearings. The Bed : The bed is pillar type having two pillars made of best quality steel nicely finished & duly hard chrome plated in the most modern hard chrome plating unit. The Saddle : The Saddle is fitted on two pillars very precisely. It runs on pillars very smoothly and accurately to the Head Stock alignment. The Apron : The apron gives movement to the saddle with head transfer along with pillars through steel rack and pinion arrangements. It's all gears are made of best quality steel. Vice Jaws : The vice jaws made from the best quality alloy steel are fitted on the saddle well aligned with the head stock center fitted in a heavy duty box type vice. The jaws are heat treated. The movements of jaws are controlled by a screw on the saddle. Range of NCT PVC Pipe Threading Machines and Die Heads. 3/8'' to 1.12'' do/- Capacity Pipe & Bolt 1/2'' to 2'' do/- 1/2'' to 2.1/2'' do/- 1'' to 4'' Capacity Pipe 2.1/2'' to 6'' do/- 4 to 8 do/-

We are situated in Ludhiana(India) and have established a fine network with the help of which we ensure timely delivery. Packaging of our products is accomplished by following stringent quality standards. We have hired a team of professionals who make sure that the entire lot is intricately packed and reaches the destination in the best state.

The packaging of our products is done using high-grade packaging material. Moreover, we are assisted with advanced machines and packaging experts for safe packaging of the products. We have hired quality auditors who keep a strict check on the quality of the raw materials and also check the inputs against varied quality parameters before procuring them.

Backed by efficient logistics team, we make deliveries of the goods in the set time span. Raw material that is used for preparing the offered lot is sourced from the genuine vendors. Also, we procure it only after complete quality inspection.   Bed : The Bed of Pipe Beveling Machine is made of Cast Iron. It is Very Rigid and sturdy in construction so as to take maximum Load and absorb maximum vibrations. It is provided with four Nos. Foundation Holes of Dia M20 at four corners of the bed. It is also provided with Four Tapped holes of 5/8 BSW near the Foundation Holes. The Head Stock and Clamping Vice is fitted on the Bed. Head Stock : he Head Stock body of Pipe Beveling Machine is made of Cast Iron. It is Very rigid and sturdy in design. The Head Stock is designed for Four Nos. Spindle speeds. All the Gears are of helical type made out of Axle Forging. The width of gears is 50 mm. The Shifting Gears slide on Splined Shafts. The Shafts are mounted on Heavy Duty Ball Bearings. The Input Shaft will be provided with a pulley having three grooves for C-Section V-belts. The Main Spindle is mounted on two Taper Roller Bearings mounted in Hard Chrome Plated Ground Sleeve. The Sleeve along with main spindle fitted with Beveling Head is mounted in the Head Stock body and is movable To and Fro along its axis. A Hyd. Cylinder actuated electrically makes the movement of the sleeve in the Head Stock. The Movement of the Sleeve can also be made manually. The Head Stock is Oil Filled. It is provided with Oil Filling hole, Oil Drain hole and Oil Level Indicator. Clamping Vice : The Box Type Clamping Vice is fitted on the Bed. The Vice is provided with Round Clamping Jaws for each size (4, 5, 6, 7, 8,). The Vice will be Self-centering type. The movement of the Clamping Jaws is made by Pneumatic cylinder fitted on the Vice actuated electrically. The Vice will be very rigid and sturdy in design. Machine will be supplied with single clamping vice. Beveling Head : A special Beveling Head will be provided with the machine. Two Tools of HSS will be used, One for Beveling and second for Root Face. The Beveling Tool will be mounted in a special Spring Loaded Tool Holder with a Roller device. It is fitted on the main spindle that is then mounted in the traveling Sleeve.

Supported by superior transportation system, we can easily make safe and quick deliveries within the promised time span. Our product is packed in industrial grade packages that are recyclable and provide protection to the products from physical and chemical damage. Additionally, the product is properly labeled to provide information.

To keep the extensive array of products safe till final dispatch, we have a well-structured and organized warehouse that is well maintained by veteran professionals. Founded in Ludhiana(India), our company has been successful in capturing the local and domestic markets as trader of this product   Liquid Painting Plant having following items : Liquid Paint Tanks – 1 Nos. Dripping Tray - 1 no Oil Fired Curing oven (Straight Type) – 1 Nos. Overhead Motorized Conveyor, with support Structure – 1 Set. Electrical Control Panel – 1 Set. Painting, and Finishing etc. – 1 Lot.

Our product is packed in industrial grade packages that are recyclable and provide protection to the products from physical and chemical damage. Additionally, the product is properly labeled to provide information. With our modern transportation facility, timely and safe deliveries are guaranteed with us.   Technical Specifications : I Ledger welding Double Side Electric Supply - Single Phase 220 Volt HZ 50/60 Speed - 2 to 10 RPM Motor Drive - AC Inverter Type Motor - Type AC 220-Volts-3-Phase Torch Clamping - PNEUMATIC Length Adjustment - 150 to 2400 mm Dimension - L x W x H 11.3x2.5x5.3 (Foot) Key Features - High production , Easy to operate, Easy to maintain, Uniform welding results

We keep the finished assortment of products in the highly developed and capacious storage unit. This helps us in keeping the products safe and sorted till the final dispatch. We have a sound payment policy. Following it, we maintain transparency and only use methods that are safe, secure, and legal. Our clients can choose out of number of options as per convenience.   Key Features : High production , Easy to operate, Easy to maintain, Uniform welding resultsUses : Jack Welding Machine is used to weld base plate with pipe and sleeve without making any joint between them,It gives high production and accuracy to product. Outer prop are used with combination of Inner prop and base jack to make a sctructure. All the components are used in combination of each other Base jack welding machine,Inner prop welding machine,Outer prop welding machine,Cuplock welding machine,Ringlock welding machine. National Cutting Tools provides complete solution for scaffolding and formwork by providing Automatic scaffolding machines.Details : Technical Specifications  -  Outer Prop welding machine Electric Supply -  Single Phase 220 Volt HZ 50/60 Speed  -  2 to 10 RPM Motor Drive -  AC Inverter Type Motor  -  Type AC 220-Volts-3-Phase Torch Clamping  -  PNEUMATIC Length Adjustment  -  150 to 2400 mm Dimension  -  L x W x H 11.3x2.5x5.3 (Foot)

Customers should stay rest assured with us for the payment procedures. They can pay us conveniently through wide-ranging payment mediums. In order to keep the products in safe condition during transit and handling, we meticulously pack them at our own packaging facility. Also, we make sure that the packaging material is sourced from the trusted vendors.   Design & Workmanship : Hydraulic Pipe Threading Machine is designed to produce precise threads within the tolerance for which they were intended. Head Stock : A heavy duty geared Head Box is of best quality casting providing support to the spindle bearings. The box is of gear type, lubricated, and fitted with three extra heavy-duty bearings. The Bed : The bed is pillar type having two pillars made of best quality steel nicely finished & duly hard chrome plated in the most modern hard chrome-plating unit. The Saddle : The Saddle is fitted on two pillars very precisely. It runs on pillars very smoothly and accurately to the Head Stock alignment. The Apron : The apron gives movement to the saddle with head transfer along with pillars through steel rack and pinion arrangements. All the gears are made of best quality steel. Vice Jaws : The vice jaws made from the best quality alloy steel are fitted on the saddle well aligned with the head stock center fitted in a heavy-duty box type vice. The jaws are heat-treated. The movements of jaws are controlled by a screw on the saddle. Range of NCT Threading Machines and Die Heads 1/2" to 2.1/2" do/- 1" to 4" Capacity Pipe 2.1/2" to 6" Capacity Pipe 4" to 8" 4" to 8" Capacity Pipe

Our organization assures distribution of wholesale as well as retail consignments of the goods as per the jointly decided period. We have our own storage unit wherein we keep a large stock for meeting urgent and massive requirements of the clients. Laced with modern amenities, this unit keeps the lot free from the damaging factors.   Features : Thread - TPI or Pitch  -  1/8 in - 27 NPT, 1/4 in - 18 NPT, 3/8 in - 18 NPT, 1/2 in - 14 NPT, 3/4 in - 14 NPT, 1 in - 11 1/2 NPT Material  -  Carbon Steel, HSS Includes  -  Wooden Case, Taps, Dies Type  -  Tap & Die Special Taps : Your tapping requirement may be unique for various reasons, but one common requirement in all applications is successful tapping. Some examples of why your application may be special. Material characteristic such as swarf type, elasticity, strength and hardness. depth of hole thread size pitch thread form reach holding. There are essentially four qualities in successfully designing and manufacturing a tap. Theoretical knowledge and practical experience are intrinsic in this process. Size form geometry texture or finish Base material, its heat treatment, and final surface coating are significant factors; but they would be irrelevant without the correct geometry. Tap geometry involves a combination of features tailored to all the above... thread and flute cutting angles, flute pattern, cutting force reduction features. The culmination of these geometrical features is the knowledge we refer to. Our knowledge combined with processes and equipment, allow consideration of all these variables.

Our product is packed in industrial grade packages that are recyclable and provide protection to the products from physical and chemical damage. Additionally, the product is properly labeled to provide information. With our wide connectivity, trustworthy shipping facilities, we are flexible in delivering the product basket to the clientele within the dedicated time.   Details : The Pipe Threading Machine is used for Cutting External Thread on Steel Pipe by Chasing method. HSS Tangential Chasers are used as cutters. Pipe remains stationery and Die Head rotates. BSP, MATRIX, BSPT, NPT, UNF,UNC, BSW, Acme Threads can be cut on this machine depending upon the type of Chasers. The machine mainly consists the following : Base Head Stock Saddle Pillar Or Bed Type Clamping Vice Die Head   The Conduit Pipe Threading Machines are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirements are combined in this model to from the basic fundamentals of correct threading. All the gears are made of case hardened steel with extra large face with and tooth thickness and cut on hobbing machine for noiseless operation even at high speed. Naturally the are built with high standards of workmanship, material and quality so closely associated with Company Tradition. Design & Workmanship : The National Cutting Tool Conduit pipe threading machines are designed to produce quality threads within the to lerance for which they were intended. Head Stock : A heavy duty geared Head Box is of best quality casting providing support to the spindle bearings. The box is of gear type, lubricated, fitted with three extra heavy duty bearings. The Bed : The bed is pillar type having two pillars made of best quality steel nicely finished & duly hard chrome plated in the most modern hard chrome plating unit. The Saddle : The Saddle is fitted on two pillars very precisely. It runs on pillars very smoothly and accurately to the Head Stock alignment. The Apron : The apron gives movement to the saddle with head transfer along with pillars through steel rack and pinion arrangements. It's all gears are made of best quality steel. Vice Jaws : The vice jaws made from the best quality alloy steel are fitted on the saddle well aligned with the head stock center fitted in a heavy duty box type vice. The jaws are heat treated. The movements of jaws are controlled by a screw on the saddle. Range of NCT Conduit Pipe Threading machine and Die Heads : 3/8'' to 1.12'' do/-

We have well-organized warehouse that is divided into specified areas according to technological operations in order to automate inbound, outbound and in-stock operations. This helps us in making quick deliveries in the shortest time span. Established in Ludhiana(India), we are well-known name offering comprehensive range of products.   Design & Workmanship : The National Cutting Tools Pipe & Bolt Threading Machines are designed to produce quality threads within the tolerance for which they were intended. Head Stock : A heavy duty geared head box is of best quality casting providing support to the spindle bearings. The box is of gear type, lubricated and fitted with three extra heavy duty bearings. Range of NCT Bolt Threading machines and Die Heads : 3/8'' to 1.12'' do/- 1/2'' to 2 .1/2" do/-

We source the raw material from the trusted places in the market. As a result of which, the finished products stand high on the expectations of the clients. Backed by efficient logistics team, we make deliveries of the goods in the set time span.   Design : The National Cutting Tool Bar threading machines are designed to produce quality threads within the tolerance for which they were intended. Head Stock : A heavy duty geared Head Box is of best quality casting providing support to the spindle bearings. The box is of gear type, lubricated, and fitted with three extra heavy duty bearings. The Bed : The bed is pillar type having two pillars made of best quality steel nicely finished & duly hard chrome plated in the most modern hard chrome plating unit. The Saddle : The Saddle is fitted on two pillars very precisely. It runs on pillars very smoothly and accurately to the Head Stock alignment. The Apron : The apron gives movement to the saddle with head transfer along with pillars through steel rack and pinion arrangements. It's all gears are made of best quality steel. Vice Jaws : The vice jaws made from the best quality alloy steel are fitted on the saddle well aligned with the head stock center fitted in a heavy duty box type vice. The jaws are heat treated. The movements of jaws are controlled by a screw on the saddle. Range : 3/8'' to 1.12'' do/- 1/2'' to 2 .1/2" do/-

By employing qualitative raw material, our entire range is processed. We, as a promising name, procure it from the trusted places only. We make available different payment options to suit the convenience level of the clients. We entertain both online and offline payment processing methods for the convenience of our customers.   Features of the Multi-Spindle Drilling Machine : Specially designed for Scaffolding pipes drilling operation. Machine will have the capacity to load 40 NB, 2000mm length pipes, for auto mode and 3000mm in semi auto mode Drilling Pitch will be 120mm Please note that our machine has 14 spindles fixed in particular pitch. They are not adjustable. If any change in, pitch and no of holes to be drilled, is required please specify in your enquiry. For Drill height adjustment-adjustable Sleeves Type Din 6327 with MT-2 Taper will be provided. (Max drill size 17.5 mm with MT2 taper shank) Machine will be equipped with automatic loading of the pipe from loading table to the V-Block for drilling. Machine will have Manual/semi-auto and Automatic Mode Selection in operation. In manual mode, individual functions of the machine can be operated manually during initial machine setup. After machine setup is completed, it can be run in Semi auto or Automatic-mode by selecting Semi auto or Auto Mode Automatic cycle sequence is as below. Positioning of the pipe. Clamping of the pipe. Slide up with rapid movement till the drill point. Coolant ON & Slide up with feed movement to drill the pipe on one side.