Multi Column Distillation Plant Dealers

The multicolumn distillation plant is based on FINNAQUA design. The multicolumn distillation plant consists of specially designed columns which produce sterile distill water. The multicolumn distillation plant is compact and easy to operate and maintain. All contact parts in the multicolumn distillation plant are of S.S.316 quality. Maintenance cost of in the multicolumn distillation plant is low as there are no moving parts. Distilled water as per IPBP standards is produced in the multicolumn distillation plant. Total energy saving in the multicolumn distillation plant is 75% as less heating energy and less cooling water is required.

• Material: Metal
• Application: Pharma
• Capacity: 80 Ltr/ Hrs, 1000 Ltr/ Hrs
• Surface Finishing: Polished
• Color: Silver
• Feature: Corrosion Resistance, High Quality

Our company is widely appreciated as the Manufacturer and Supplier of Multi Column Distillation Water Plant based in Chennai, Tamil Nadu. We are backed by a team of skilled professionals who fabricate the Water Plant in adherence to the norms set by regulatory bodies. We meticulously package the Plant in durable materials to ensure its high quality is maintained. We are offering Distillation Water Plant at affordable rates.   Multi Column Distillation plant produces Pyrogen free sterile water for injection (W. F. I.). The Water for Injection (WFI) produced by these plants is quite economical due to low maintenance and low operational cost. Multi Column Distillation plant consists of specially designed columns which make optimum use of the principles of inter-stage heat exchange to produce pure Pyrogen free sterile distilled water for Injectables as per IP/BP specification. Specification : The complete unit is made up of SS 316 / 316 L with active surface being electro polished Distillate temperature 95°C which meets IP/BP/USP specifications. Double tube sheet for first heat exchanger where boiler steam is used. Insulation is done by Resin bonded glass wool All contact parts are S. S 316/316L and all joints are sealed with Teflon Gasket. PLC based fully automatic panel board provided with printer. Orbital welding for tube-to-tube sheet joints Pyrogens are removed by centrifugal force developed and specially designed spiral baffle. Features : Total energy saving is 75% as less heating energy and less cooling water is required. Maintenance cost is low as there are no moving parts except pump. Sanitary triclover fittings for quick and easy preventive maintenance. Provided with compact control panel board made up of SS304 Conductivity meter for feed water and final distillate. Feed water pump is a positive displacement piston type-reciprocating pump. User-friendly operator interface to allow the easy visual inspection of the cycle monitoring and control. Models :  Capacity 50 ltrs/hr.  -  5000 ltrs/hr

Multi Column Distillation Plant available from 80 ltrs. hr. to 1500 ltrs. hr. capacity produces 100% pure, pyrogen free, sterile distillate at unmatched low operational cost which confirms to Pharmacopoeia standards for WFI. All contact parts are made out of S.S. 316316L and all the tubes are seamless. The system works on the principle of inter stage heat exchange and use intrinsic heat to supplement consumption need of heating energy and cooling water. Due to surface film evaporation

• capacities: 80 - 5000 LPH

Multicolumn Distillation Plant is the perfect Multicolumn Distillation Plant solution. Available in capacities ranging from 80 - 5000 LPH, the Multicolumn Distilled plant is used for its economy, low maintenance and low operation costs.Pure Sterile Pyrogen free distilled water conforming to USP standards.Electro polished creviceless inner contact surfaces.PLC based system for automated operation.Sanitary triclover fittings for quick and easy preventive maintenance.Double tube Sheet construction for the first column, where boiler steam is present.Synoptic panel board with facility for logging the data can also be given.

Legend Multi Column Distillation Unit consists of specially designed columns which make optimum use of the principles of inter-stage heat exchange to produce pure Pyrogen free sterile distilled water for Injectables as per IPBP specification. Advanced construction and ultra-modern design prevents any stagnation of water within the unit while Contamination Seal prevents cross-flow of air between the clean and un-clean area. Unit Capacity is available in 80 litres. , 150 litres. , 300 litres. , 500 litres. , 1000 litres range.

• Material: Iron, Metal, Stainless Steel
• Application: Industrial Use
• Condition: New, Used
• Surface Finishing: Polished, Power Coated
• Type: Multi Column Distillation Plant
• Certification: ISI Certified, ISO 9001:2008 Certified
• Color: Black, Golden, Grey, Grey-Golden, Metallic, Shiny Silver, Silver
• Feature: Accuracy Durable, Auto Reverse, Corrosion Resistance, Dimensional, Hardend & Temper, High Quality, High Tensile

• Material: Mild Steel
• Surface Finishing: Paint Coating
• Condition: New
• Power: 9-12kw
• Application: Industrial Use
• Voltage: 440V
• Warranty: One Year
• Color: Grey
• Certification: ISO 9001:2008
• Feature: Accuracy Durable, High Quality, High Tensile
• Type: Multi Column Distillation Plant
• After-Sales Service Provided: Yes
• Country of Origin: India

Multi Column Distillation Plant is based on FINN-AQUA design. It consist of specially designed columns which make optimum use of the principles of inter stage heat exchange (Multi effect distillation method) to produce pure pyrogen free sterile distilled water for injectable as per IP/BP specification. The vapor with high velocity and under pressure passes over a SPECIALLY DESIGNED SPIRAL BAFFLE system which develops tremendous centrifugal force and thus eliminates any chances of pyrogens carry over in the vapors.To industries where 100% pure Pyrogen - free water-for injection plays role, Multicolumn Distillation Plant is the perfect solution. Available in capacities ranging, the Multicolumn Distilled plant is used for its economy, low maintenance and low operation costs. By Multi Effect Distillation method significant energy (75% approx.) is saved when compared to the conventional method. All contact parts are made out of AISI 316 quality stainless steel and mirror polished. All pipes and tubes are essentially seamless. Operation : The pre-heated feed water (through condenser) is fed into the first column where 33% of feed water is converted into steam under pressure by outside boiler steam. The pure steam produced in the first column having temperature of 135 degree Celsius and the remaining feed water goes to the 2nd column. The pure steam is used as a heating media in the 2nd column and converts part of remaining feed water into steam. In the process the steam itself condenses back into water. This process is repeated till the last columns each working at low temperature & pressure as compared to the one before it. The steam produced in the last column is condensed in the condenser by feed water as well as cooling water. As external heat is required only to convert the 33% of feed water, the heating energy required is reduced by 67%. Construction Details : Distillation column houses the heat exchanger & pyrogen separation system. Heat exchanger in first column with Double Tube Sheet Design as per USP requirement. Common condenser at the end of distillation process to condense steam & separate gas from distillate Vent on the condenser is with 0.2 micron bacteria retentive filter for safe shut down. All seamless pipe with orbital welding inspected by boroscopic procedure. Designing is as per ASME std. All surface finish better than 0.3 Ra. Salient Feature : Total energy saving is 75% as less heating energy and less cooling water is required. Pyrogens are removed by centrifugal force developed & specially designed spiral baffle. All contact parts are s.s.316 quality. All pipes and tubes are seamless and gaskets made form teflon. Distillate Temperature is quite high.( 90-95') Distilled water as per IP/BP standards and conductivity less than 1 micron/cm. Online temp. monitoring of WFI Conductivity monitoring and control for feed water & WFI Automatic feed water control to prevent column flooding.

• pressure: 3 kg/cm2

Multicolumn distilled water plant designed to produce 100% pyrogen free sterile distillate & chemically pure confirms to IPBPUSP standard. Multicolumn distilled water plant works on the principle of interstate heat exchanger, dramatically reduce the consumption of heating energy and cooling water. Thus enable to produce a large volume of pyrogen free distillate at a fraction of the cost than conventional systems. All documents related to factory acceptance test(FAT), Installation Qualifications(IQ), Operation Qualification(OQ), PQ are provided as part of the operational manual.

• Design: Standard
• Capacity: 1000/ Hr
• Automatic Grade: Automatic

• Capacity: 01 Ton to 20 Ton
• Approximate price: 20 Lakh to 01 Cr
• Material of construction: SS304/SS 316
• Erection & Commissioning time: Maximum one Month
• After Sales Service: Yes

• CAPACITY: 50 to 2500 Ltrs.

Multicolumn Distillation Plant is the perfect Multicolumn Distillation Plant solution. Available in capacities ranging from 80 - 5000 LPH, the Multicolumn Distillation Plant is used for its economy, low maintenance and low operation costs.Sanitary triclover fittings for quick and easy preventive maintenance.Double tube Sheet construction for the first column, where boiler steam is present.Synoptic panel board with facility for logging the data can also be given.

Pure Sterile, Pyrogen free distilled water conforming to IPBP Standards,Energy Saving-Low Operating Cost.Fully Automatic Operation.,N Compact Design-Saving Space.installation, All contact parts are S.S. 316 and all joints are sealed with Teflon gasket.

The multi column water distillation plant is used for the sterile preparations in various industries. The Multi column distillation plant finds a wide range of application in the pharmaceutical industry. The water distillation plane is capable of meeting the needs of the customers and the standards of the Pharma industry. The machine has a water for injection system to maintain the WFI parameters of the industry within the acceptable limit. The water for injection process plant works in a way to meet the industry standards and demands of the users. The departed leg region and the high accuracy of the system ensures the control of the produced water for injection parameters under the allowable limits. The water for injection plant meets the requirement and standards of the cGMP, WHO & USFDA.

This translates to having a WFI (Water For Injection) generation system that is constructed to high complexity level and stringent procedure control to maintain WFI (Water For Injection) chemical parameters within the allowable limits.

• Material: MS
• Capacity: 1000-10000L
• Use: Industrial
• Max Design Pressure: 15-20 bar
• Temperature: -20 deg C to +50 deg C

J.K.INDUSTRIES Multi Column Distillation Plant is based on FINN-AQUA design. It consist of specially designed columns which make optimum use of the principles of interstage heat exchange (Multi effect distillation method) to produce pure pyrogen free sterile distilled water for injectables as per IP/BP specification. The vapour with high velocity and under pressure passes over a SPECIALLY DESIGNED SPIRAL BAFFLE system which develops tremendous centrifugal force and thus eliminates any chances of pyrogens carry over in the vapours. By Multi Effect Distillation method significant energy (75% approx) is saved when compared to the conventional method. All contact parts are made out of AISI 316 quality stainless steel and mirror polished. All pipes and tubes are essentially seamless. The unit is mounted on sturdy m.s. tubular stand and duly painted by epoxy paint.  Operation : The pre-heated feed water (through condensor) is fed into the first column where 33% of feed water is converted into steam under pressure by outside boiler steam. The pure steam produced in the first column having temperature of 135'c and the remaining feed water goes to the 2nd column. The pure steam is used as a heating media in the 2nd column and converts part of remaining feed water into steam. In the process the steam itself condenses back into water. This process is repeated till the last coulms each working at low temperature & pressure as compared to the one before it. The steam produced in the last column is condensed in the condensor by feed water as well as cooling water. As external heat is required only to convert the 33% of feed water, the heating energy required is reduced by 67%.  Salient Features : Compact unit, easy to maintain and operate.  Total energy saving is 75% as less heating energy and less cooling water is required.  Pyrogens are removed by centrifugal force developed & specially designed spiral baffle.  Maintenance cost is low as there are no moving parts.  Trouble free performance of multi-stage pump(horizontal)  Provided with Compact control panel board.  All contact parts are s.s.316 quality. All pipes and tubes are seamless and gaskets made form teflon.  Distillate Temperature is quite high.( 90-95')  Distilled water as per IP/BP standards and conductivity less than 1 micromhos/cm.  Scope of supply Includes : A S.S..316 quality surge tank with float valve to maintain water level.  Feed Water Pump s.s 316  GRUNDFOS pump.  Control panel board with indicating Lamps.