Power Distribution Transformer Dealers in Ludhiana

• Certification: ISI Certified
• Application: Industrial Use
• Automatic Grade: Automatic
• Voltage Class: Upto 40 MVA & 66 kV
• Max temperature rise: 40/50 degree C
• Lower Temperature: Can Be Offered On Request

Features Sturdy built Efficient usage Durability   Temperature Rise Transformers are designed for a maximum temperature rise 40/50C of oil and winding Lower temperature rise can be offered on request   Standard Fittings Rating and diagram plate Earthing terminals - 2 nos Lifting lugs Oil level indicator (plain) Drain-cum bottom filter valve with plug Oil filling hole with plug on conservator Oil conservator with drain plug Air release plug Silica gel air breather Bi-directional flat rollers HV terminals-outdoor bushings LV terminals-outdoor bushings Radiators Filter valve with plug Thermometer pocket Oil temperature indicator Externally operated off circuit tap changing switch Explosion vent Sampling value (for 2000 Kva & above transformers only)   Accessories on Request LV and HV cable boxes Winding temperature indicator (WTI) Buchholz relay Magnetic oil level gauge Marshalling box Disconnecting chamber Oil temperature indicator with electrical contacts (OTI) Pressure relief valve

We are offering power distribution transformers. Power transformers request callback applicable standards: is, iec, ansi, jis, bs, din, etc. Transformer options: cooling tubes radiators corrugated tanks pole mounted ground mounted free breathing hermetically sealed csp non csp winding-copperaluminium (foil rectangular wire round wire) fittings and accessories, cable terminations etc.as required standards: muskaan’s transformers are designed and tested as per is : 2026, bs - 171, iec - 76 & iec - 726. Vector group: transformers will be connected as per vector group reference dyn11. Other vector groups can be offered as per specific requirements terminal arrangement: h. V. - bare bushings or cable box, l. V. - bare bushings or cable box. Disconnecting chambers can also be provided on both hv and lv cable boxes. Temperature rise muskaan’s transformers are designed for a maximum temperature rise of 40 50 degree c of oil winding. Lower temperature rise can be offered on request.

Our company has expertise in manufacturing, exporting & supplying of Power Distribution Transformer. We manufacture Power Distribution Transformer using the cutting-edge technology and superior quality components and parts. Our Power Distribution Transformer conforms to the national and international standards such as IEC, ANSI, DIN, etc. The Power Distribution Transformer is quality tested, flawless and reliable. The Power Distribution Transformer, supplied by us, is tested before dispatch at the central power research institute. Specifications 3 phase, 50 v hz in voltages of 11 kv,22 kv & 33 kOff-circuit tap changer to provide +5% to -10% taps in steps of 2. 5%On-load tap charger to provide +7% to -21% taps in steps of 1. 75%Class a insulated copper woundVector group dyn 11Continuous dutyPainting as per is/iec standardsHv side cable box lv side cable box/bus ductStandard fittings as per is 2026/iec 76 Features Latest manufacturing techniques ensure cost effectives & reliabilityDesign conforms to is 2026,bs 171, IEC 76 and other relevant standardsDesigned for 25 years of trouble-free performanceWithstands electrical impulses, thermal and dynamic stressesLow power lossLow noiseOptimum utilization of active materials for sleek design Optional Accessories Oil temperature indicatorWinding temperatureAlarm & trip contact with buchholz relayNeutral current transformerPressure relief value without contact/with contactMagnetic oil level gaugeMarshalling box to house oil temperature indicator & winding temperature indicator

• Brand Name: Transware
• Phase: As per requirement
• Type: Outdoor/Indoor
• Application: Govt and Industrial
• Coil Number: As per requirement

A distribution transformer is a transformer that provides the final voltage transformation in the electric power distribution system, stepping down the voltage used in the distribution lines to the level used by the customer. The invention of a practical efficient transformer made AC power distribution feasible; a system using distribution transformers was demonstrated as early as 1882. If mounted on a utility pole, they are called pole-mount transformers. If the distribution lines are located at ground level or underground, distribution transformers are mounted on concrete pads and locked in steel cases, thus known as pad-mount transformers.Distribution transformers normally have ratings up to 200 kVA, although some national standards can describe units up to 5000 kVA as distribution transformers. Since distribution transformers are energized for 24 hours a day (even when they don't carry any load), reducing iron losses has an important role in their design. As they usually don't operate at full load, they are designed to have maximum efficiency at lower loads. To have a better efficiency, voltage regulation in these transformers should be kept to a minimum. Hence they are designed to have small leakage reactance.

Volt star transformers is a leader in the designing and manufacturing of distribution transformers in india. We implement latest technology to produce power electrical transformers that ensures trouble free long performance at the most economic cost in the market. Our standard range of transformers comes of capacity from 100 kva to 3.2 mva. Our distribution electrical transformers are highly appreciated for its high efficiency low maintenance cost. Thus, we are recognized as india's leading manufacturers and exporters of these distribution electrical transformers. about distribution transformer: distribution transformer is designed to provide final voltage transformation to the electric power distribution system. Additionally, the designing and working also makes the transformer ideal to be used for stepping down the voltage that is required in the distribution lines to the degree needed by the customer. If it is mounted on a utility pole, the same transformer is termed as pole-mount transformers. On the other hand, if distribution at ground level or underground is required, the transformer is placed on the concrete pads and locked steel cases. These are termed as pad-mount transformers. Specifications of distribution electrical transformers capacity : 100 kva to 3.2 mva input voltage : 11kv, 22kv, 33 kv (or as required) output voltage : 0.433kv or as required application : indoor or outdoor tapping : offload tap changer or on load tap changer winding : copper frequency: 50 hz & 60 hz cooling: onan cooled single phase three phase

• Winding Material: Copper
• Cooling Type: Oil Cooled
• Mounting Type: Pole mounted / Ground Mounted
• Weight: 4-9 Tons
• Frequency: 50-60 Hz
• Body Material: MS
• Brand Name: Bharti
• Phase: Single/Three Phase
• Temperature: 40-50 degree Celsius for Aluminum wound and 45-55 degree Celsius 

  Muskaan Power Infrastructure Ltd. is among the top leading manufacturers, suppliers and exporters of best quality Distribution & Power Transformer in Ludhiana, Punjab, India.Get Best Price and Full Specification of Distribution & Power Transformer Manufacturers - Muskaan Power Infrastructure Ltd.

Industrial Distribution Transformers, electrical distribution transformers

Cables, electric switchgear, power control devices, Voltage Stabilizer

Electrical Distribution Transformer, pad mounted distribution transformer