Power Transformers Dealers in Ludhiana

• Application: Industrial Use
• Frequency: 50hz
• Feature: Sturdy Construction, Electrical Porcelain, Four Times Stronger
• Tensile Strength: 100-125Mpa
• Warranty: 6 Months
• Output: 0.33V
• Accuracy: 1.0%
• Input Voltage: 220-240v

Features: Extremely Safe No usage of flammable liquids Pollution Free No emission of Toxic gases Can be placed closed to the load Highly efficient Robustly built Enhanced emergency load capability Higher reliability Low noise and low maintenance Ease of repairing (Open Coils)

• Brand Name: MUSKAAN's
• Place of Origin: LUDHIANA

We are offering power transformers applicable standards: is, iec, ansi, jis, bs, din, etc. Transformer options: cooling tubes radiators corrugated tanks pole mounted ground mounted free breathing hermetically sealed csp non csp winding-copperaluminium (foil rectangular wire round wire) fittings and accessories, cable terminations etc.as required standards: muskaan�s transformers are designed and tested as per is : 2026, bs - 171, iec - 76 & iec - 726. Vector group: transformers will be connected as per vector group reference dyn11. Other vector groups can be offered as per specific requirements terminal arrangement: h. V. - bare bushings or cable box, l. V. - bare bushings or cable box. Disconnecting chambers can also be provided on both hv and lv cable boxes.

• Brand Name: Transware
• Phase: As per requirement
• Type: Outdoor/Indoor
• Application: Govt and Industrial
• Coil Number: As per requirement

A distribution transformer is a transformer that provides the final voltage transformation in the electric power distribution system, stepping down the voltage used in the distribution lines to the level used by the customer. The invention of a practical efficient transformer made AC power distribution feasible; a system using distribution transformers was demonstrated as early as 1882. If mounted on a utility pole, they are called pole-mount transformers. If the distribution lines are located at ground level or underground, distribution transformers are mounted on concrete pads and locked in steel cases, thus known as pad-mount transformers.Distribution transformers normally have ratings up to 200 kVA, although some national standards can describe units up to 5000 kVA as distribution transformers. Since distribution transformers are energized for 24 hours a day (even when they don't carry any load), reducing iron losses has an important role in their design. As they usually don't operate at full load, they are designed to have maximum efficiency at lower loads. To have a better efficiency, voltage regulation in these transformers should be kept to a minimum. Hence they are designed to have small leakage reactance.

Our company has expertise in manufacturing, exporting & supplying of Power Distribution Transformer. We manufacture Power Distribution Transformer using the cutting-edge technology and superior quality components and parts. Our Power Distribution Transformer conforms to the national and international standards such as IEC, ANSI, DIN, etc. The Power Distribution Transformer is quality tested, flawless and reliable. The Power Distribution Transformer, supplied by us, is tested before dispatch at the central power research institute. Specifications 3 phase, 50 v hz in voltages of 11 kv,22 kv & 33 kOff-circuit tap changer to provide +5% to -10% taps in steps of 2. 5%On-load tap charger to provide +7% to -21% taps in steps of 1. 75%Class a insulated copper woundVector group dyn 11Continuous dutyPainting as per is/iec standardsHv side cable box lv side cable box/bus ductStandard fittings as per is 2026/iec 76 Features Latest manufacturing techniques ensure cost effectives & reliabilityDesign conforms to is 2026,bs 171, IEC 76 and other relevant standardsDesigned for 25 years of trouble-free performanceWithstands electrical impulses, thermal and dynamic stressesLow power lossLow noiseOptimum utilization of active materials for sleek design Optional Accessories Oil temperature indicatorWinding temperatureAlarm & trip contact with buchholz relayNeutral current transformerPressure relief value without contact/with contactMagnetic oil level gaugeMarshalling box to house oil temperature indicator & winding temperature indicator

• Production Power: 750-1000kw
• Application: Industrial Use

Catering to the needs of the clients, we offer used power transformer. Even though used, the power transformer is available in excellent working condition. Our used power transformer is less power consuming and therefore highly energy efficient. We check the used power transformer on different parameters like safety, performance, durability etc. specifications voltage ratio 110000.433kv of rating 250 kva & 160 kva voltage ratio 11000.433 kv of rating 1200 and 2500 kva with oltc and one piece of 1000 kva servo unbalance required urgently why our used power transformer? efficient reliable low power consumption eco friendly

• Power: 100-5000 KVA
• Cooling Type: Dry Type/Air Cooled, Oil Cooled
• Brand Name: GTB
• Frequency: 50 Hz
• Phase: Three
• Input Voltage: 11/22/33
• Usage/Application: Industrial
• Winding Material: COPPER

Volt star transformers is a leader in the designing and manufacturing of distribution transformers in india. We implement latest technology to produce power electrical transformers that ensures trouble free long performance at the most economic cost in the market. Our standard range of transformers comes of capacity from 100 kva to 3.2 mva. Our distribution electrical transformers are highly appreciated for its high efficiency low maintenance cost. Thus, we are recognized as india's leading manufacturers and exporters of these distribution electrical transformers. about distribution transformer: distribution transformer is designed to provide final voltage transformation to the electric power distribution system. Additionally, the designing and working also makes the transformer ideal to be used for stepping down the voltage that is required in the distribution lines to the degree needed by the customer. If it is mounted on a utility pole, the same transformer is termed as pole-mount transformers. On the other hand, if distribution at ground level or underground is required, the transformer is placed on the concrete pads and locked steel cases. These are termed as pad-mount transformers. Specifications of distribution electrical transformers capacity : 100 kva to 3.2 mva input voltage : 11kv, 22kv, 33 kv (or as required) output voltage : 0.433kv or as required application : indoor or outdoor tapping : offload tap changer or on load tap changer winding : copper frequency: 50 hz & 60 hz cooling: onan cooled single phase three phase

• Winding Material: Copper
• Cooling Type: Oil Cooled
• Mounting Type: Pole mounted / Ground Mounted
• Weight: 4-9 Tons
• Frequency: 50-60 Hz
• Body Material: MS
• Brand Name: Bharti
• Phase: Single/Three Phase
• Temperature: 40-50 degree Celsius for Aluminum wound and 45-55 degree Celsius 

NUCON Transformers area proven as global technology in transformer. This technology with our expertise in transformers has resulted in a large range of very compact and cost efficient transformer. Transformers are available with off-circuit tap changer and / or load tap changes for voltage regulation.  Salient Features Better shield circuit strength Compact design Durable Optimum losses Use of magnetic shields to control strong flux Low flux density to withstand severe over excitation Thermally upgraded paper to improve transformer life time Insulation dressing optimization using FEM analysis Denergized tap changes (DTC) are typically provided in transformers optionally but load tap changes (LTC) are also available Available fluids : mineral oil and luminal oil customized design   Stadard Features Transforming medium voltage into high voltage levels Based on tried and tested technologies Meeting the latest I.E.C. technical specification Large overload capability depending on the ambient temperature Large overvoltage capability on generator side to withstand the overvoltage coming for load rejection Customized solution Satisfying specific customer requests Equipment for indoor and outdoor usage

• Material: Mild Steel
• Phase: 3-Phase
• Power: 5000 KVA
• Voltage: 33 KV
• Usage/Application: Industry
• Frequency: 60 Hz
• Area of Applications: In Electrical Power Industry

• Attributes: Optimum performance , Sturdy construction and Easy to install

We are a prime Manufacturer and Exporter of HT Transformers, which are designed and tested as per the international standards. These HT transformers are useful for converting high electrical energy into a moderate level. We offer these transformers at very reasonable prices in order to suit the budget needs of all.

• Material: Copper
• Cooling Type: Oil Cooled
• Brand Name: GTB
• Usage: Industrial
• Standards: IS-2026

• Cooling Type: Oil Cooled
• Frequency: 50-60 Hz
• Phase: 3 Phase
• Power: 100-3000 KVA
• Features: High performance, Energy efficient, Longer service life.
• Usage/Application: Industrial
• Winding Material: Copper

We have the expertise of designing and manufacturing a wide range of isolation transformers that is available in various specifications. These are meant for reducing the effects of power line problems such as noise, spikes, surges, transients and neutral. Owing to the inductive & capacitive loads, electronic ballasts and with pwm switching systems the present ac power lines are superimposed with dangerous spikes, surges, transients, sags and rfi noise & harmonics. The line noises such as spikes, surges, transients and cause stress on semi conductor components.the machine systems experience catastrophic program and software failures, extensive damage to plc’s and storage media, leading to heavy losses of production, data and man-hours. Isolation transformers are capable of eliminating electrical noises, specially noises, spikes, surges, and transients. Application areas: CNS Machines Bio Medical Equipment Printing Machinery Large Computer Installations Telecommunication Equipment Scientific Equipment

Jindal is specialized in manufacturing a variety of Isolation Transformers. One of the major products under this category is furnace transformer used in arc furnace duty applications. In case of large furnace transformers instead of radiators oil to water heat exchangers will be provided if specified. This system will help to solve the space problem in steel mills because the designs with heat exchanger occupy less space. The other Isolation Transformers manufactured by us are transformers for variable speed drive, transformers for testing application, Transformers for unit grounding and motor starting auto transformers etc. In short our company offers total solution for all kind of transformer requirement.

Transformer are manufactured with standard rating & customer requirement, bharati's transformer are designed & tested as per is2026.

• Material: Mild Steel
• Frequency: 50 - 60 Hz
• Power: 63 to 5000 KVA
• Usage/Application: Industry
• Phase: Three Phase
• Area of Applications: In Electrical Power Industry
• Voltage: 11 to 33 KV

• Phase: Single Phase
• Minimum Order Quantity: 1 Unit

We are offering Electric Power Transformers. automotive voltage regulators is very reliable for electric transformers, electric power transformers and industrial transformers for industrial utilization and various functions are performed through ac power transformers.

  Muskaan Power Infrastructure Limited is a well known cast resin transformers manufacturers, exporters and suppliers in India, our transformers are prepared with best quality raw materials.Get Best Price and Full Specification of Cast Resin Transformers.

transformer line power transformer, Distribution Transformers

Air Cooled Transformers offered by us are highly recognized in the market for their consistent and dependable performance. These Air Cooled Transformers are also liked for salient features like latest design standards, superior frame work, optimum power rating and better cost savings. These are Cast Resin Dry Type Transformer with resin insulated encapsulated winding both at input and output.

Lt Power Transformer, Voltage Stabilizer, Voltage Transformer

Electrical Transformer, hardware bolts, Tubeless Tyre, stove parts

Electrical Transformers

industrial joints, metal machinery, precision transformers, alloy steel wire

Distribution Transformers, Servo Voltage Stabiliser

Distribution Transformer

Distribution Transformer Manufacturers, Finest Quality Distribution Transformer

Three Phase Package Substations Transformers, Plating Anodizing Rectifiers