PVC Threading Machine Dealers in Ludhiana

We have lanched our new range of P.V.C. Pipe threading to solve your threading problem quality wise & Production wise, we have the above special purpose lathes with capacity from 50mm. to 250mm for 3 mtr. Pipe & 4 mtr. Pipes.

PVC Pipe Threading Machine is widely used for the purpose of threading PVC pipes of different sizes. Our PVC Pipe Threading Machine is manually operated and very simple-to-use. PVC Pipe Threading Machine that we offer has spindle RPM of 60, 101 and 134 (approx.). Our PVC Pipe Threading Machine is appreciated for sturdy construction, low maintenance and longer functional life. Features : The pillar type pipe threading and end facing machines are best suited for the tube mills, scaffolding equipment manufacturers, small pipe component manufacturers and allied industry. These machines are most robustly and ergonomically designed to give best and long term performances in most sever conditions. sic The tooth of the gears in the head stock are most precisely cut on the hear hobbing machine to give noiseless operation and then are undergone for the heat treatment Of flame hardening which leads to the lesser wear tear and hence leads to longer life of the gear. The spindle mounted in the headstock is provided with taper roller bearings to carry out the heavy-duty operations and all time accurate and noiseless operations. After long-term use if backlash is found in the bearings then it can be removed with the slight adjustment of check nut and locknut. The surfaces of the pillar guide-ways are grounded and are provided with hard chrome plating for smooth operation and lesser wear and tear during operation. The clamping device is provided with single set of clamps for small 0.D pipes and double set of clamps for greater 0.D of the pipes. The tooth of the clamps are insert type so that, this portion is worn out then only inserts can be easily changed rather than changing the whole of the clamp. For the threading machine the adjustment for the die-head can be done with the single hand operation with the box spanner, which is provided with the die-head.   Details : capacity 12mm to 65mm, motor power 5 HP., with lead screw arrangement various thteads. capacity 25mm to 100mm, motor power 7.5 HP., with lead screw arrangement various threads. capacity 65mm to 152mm, motor power 10HP., with lead screw arrangement various threads. capacity 100mm to 200mm, motor power 15HP., with lead screw arrangement various threads.    Price : 3000 USD min

Our entire range of products is made using high-quality and certified inputs, which are sourced from reliable vendors present in the market. Our quality auditors follow a strict selection process for the same. Owing to our cordial associations with the renowned logistics companies, we are capable of delivering the orders on time.

• Type: Pvc Pipe Threading Machine
• Condition: New
• Warranty: 1year
• Brand Name: IMC

Lathe type pvc pipe threading machine we introduce ourselves as one of the leading manufacturers of precision & high quality workshop machinery specializing in all type of lathe & pipe threading machines. we have launched our new range of pvc pipe threading to solve your threading problem quality wise & production wise, we have the above special purpose lathes with capacity from 50mm. To 250mm for 3 mtr. Pipe & 4 mtr. Pipe. We provide quick change collect system for quick loading & unloading of pipes of various sizes, with double saddle system for two operators working at a time for inside & outside threading simultaneously. pvc pipe threading machine construction the imc extra heavy duty lathes are renowned throughout the world to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. Imc lathes are famous for precision jobs, accuracy and trouble free preformance. imc lathes have been designed to cater need of sustained accuracy and superb finishing. bed: the bed being the foundation of the lathes is carefully designed and is of high grade cast iron. It has cross-ribs to support its walls and three inverted ‘vees’ assembled with removable gap for large swing. head stock: the main spindle is of alloy steels with ground finish to give accurate results. The main spindle runs in bush or taper roller bearing. saddle: the v ways running on the bed and the slides are most accurately hand scrapped and aligned accurately with bed and the headstock.the saddle is fitted with ‘hand’ and ‘automatic travers’ along the bed with steel rack and pinion.it is assembled with cross and upper slide graduated to give desired taper turning. tool-post: the tool-post is made out of one piece steel block and can hold four different tools at a time and can be swivelled to any desired angle. apron: the apron gives movement to the saddle for screw cutting sliding and surfacing by means of enclosed gears and half nut. All gears are of steel. tailstock: the tailstock is designed to give maximum strength bolt operation.it has long bearing within the barrel and ensures true alignment. three speed gear box: the three speed gear box is provided with the lathe to obtain coarse, midium and fine cutting ranges,both longitudinal and cross on the feed bar through gears.the lead screw with accurate thread is to be used only for thread cutting and can be engaged of disengaged with a handle provided on the gear box while the other handle is for obtaining the desired three speed. standard accessories: supplied with the machine:- face plate one-catch plate one-centre two-centre adopter one-steady rest one-follow rest one-one set of 23 gears-threading dial one- motor pully and motor attachment.

• Size in Inches: 1/2" to 2.1/2", 1" to 4", 2.1/2" to 6", 4" to 8"
• Size in MM: 12mm to 65mm , 25mm to 105mm , 50mm to 155mm , 100mm to 205mm

The Pipe Threading Machines are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum Conditions of severe with minimum maintenance . all the necessary requirements are combined in this model to from the basic fundamentals of correct threading. All the gears are made of case hardened steel with extra large face with and tooth thickness and cut on hobbing machine for noiseless operation even at high speed.

• Size in Inches: 1/2" to 2.1/2" , 1" to 4"
• Size in MM: 12mm to 65mm , 25mm to 105mm ,

The Pipe Threading Machines are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum Conditions of severe with minimum maintenance . all the necessary requirements are combined in this model to from the basic fundamentals of correct threading.

PVC threading machine in this model to from the basic fundamentals of correct threadings. All the gears are made of case hardened steel with extra large face with and tooth thickness and cut on hobbing machine for noiseless operation even at high speed. Naturally the are built with high standards of workmanship, material and quality so closely associated with COMPANY TRADITION.

Our company offers unmatched quality PVC pipe threading machine that is manufactured using superior quality materials. This further ensures high durability and effective performance due to which it is high on demand in the national and international market. We are reckoned as the most outstanding pipe threading machine manufacturers of India. Last but not the least, this PVC threading machine is easily available at the most reasonable prices. The Pipe Threading Machine is used for Cutting External Thread on Steel Pipe by Chasing method. HSS Tangential Chasers are used as cutters. Pipe remains stationery and Die Head rotates. BSP, MATRIX, BSPT, NPT, UNF,UNC, BSW, Acme Threads can be cut on this machine depending upon the type of Chasers. The machine mainly consists the following:- Base Head Stock Saddle Pillar Or Bed Type Clamping Vice Die Head The PVC Pipe Threading Machines are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirements are combined in this model to from the basic fundamentals of correct threading. All the gears are made of case hardened steel with extra large face with and tooth thickness and cut on hobbing machine for noiseless operation even at high speed. Naturally the are built with high standards of workmanship, material and quality so closely associated with Company Tradition. Design & Workmanship : The National Cutting Tools PVC Pipe Threading Machines are designed to produce quality threads within the to lerance for which they were intended. Head Stock : A heavy duty geared Head Box is of best quality casting providing support to the spindle bearings. The box is of gear type, lubricated, fitted with three extra heavy duty bearings. The Bed : The bed is pillar type having two pillars made of best quality steel nicely finished & duly hard chrome plated in the most modern hard chrome plating unit. The Saddle : The Saddle is fitted on two pillars very precisely. It runs on pillars very smoothly and accurately to the Head Stock alignment. The Apron : The apron gives movement to the saddle with head transfer along with pillars through steel rack and pinion arrangements. It's all gears are made of best quality steel. Vice Jaws : The vice jaws made from the best quality alloy steel are fitted on the saddle well aligned with the head stock center fitted in a heavy duty box type vice. The jaws are heat treated. The movements of jaws are controlled by a screw on the saddle. Range of NCT PVC Pipe Threading Machines and Die Heads. 3/8'' to 1.12'' do/- Capacity Pipe & Bolt 1/2'' to 2'' do/- 1/2'' to 2.1/2'' do/- 1'' to 4'' Capacity Pipe 2.1/2'' to 6'' do/- 4 to 8 do/-

Our company offers unmatched quality PVC pipe threading machine that is manufactured using superior quality materials. This further ensures high durability and effective performance due to which it is high on demand in the national and international market. We are reckoned as the most outstanding pipe threading machine manufacturers of India. Last but not the least, this PVC threading machine is easily available at the most reasonable prices.The Pipe Threading Machine is used for Cutting External Thread on Steel Pipe by Chasing method. HSS Tangential Chasers are used as cutters. Pipe remains stationery and Die Head rotates. BSP, MATRIX, BSPT, NPT, UNF,UNC, BSW, Acme Threads can be cut on this machine depending upon the type of Chasers. The machine mainly consists the following:- Base Head Stock Saddle Pillar Or Bed Type Clamping Vice Die Head The PVC Pipe Threading Machines are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirements are combined in this model to from the basic fundamentals of correct threading. All the gears are made of case hardened steel with extra large face with and tooth thickness and cut on hobbing machine for noiseless operation even at high speed. Naturally the are built with high standards of workmanship, material and quality so closely associated with Company Tradition.Design & Workmanship : The National Cutting Tools PVC Pipe Threading Machines are designed to produce quality threads within the to lerance for which they were intended.Head Stock : A heavy duty geared Head Box is of best quality casting providing support to the spindle bearings. The box is of gear type, lubricated, fitted with three extra heavy duty bearings.The Bed : The bed is pillar type having two pillars made of best quality steel nicely finished & duly hard chrome plated in the most modern hard chrome plating unit.The Saddle : The Saddle is fitted on two pillars very precisely. It runs on pillars very smoothly and accurately to the Head Stock alignment.The Apron : The apron gives movement to the saddle with head transfer along with pillars through steel rack and pinion arrangements. It's all gears are made of best quality steel.Vice Jaws : The vice jaws made from the best quality alloy steel are fitted on the saddle well aligned with the head stock center fitted in a heavy duty box type vice. The jaws are heat treated. The movements of jaws are controlled by a screw on the saddle.Range of NCT PVC Pipe Threading Machines and Die Heads. 3/8'' to 1.12'' do/- Capacity Pipe & Bolt 1/2'' to 2'' do/- 1/2'' to 2.1/2'' do/- 1'' to 4'' Capacity Pipe 2.1/2'' to 6'' do/-

Buyers can rely on us for the best in line products as we prepare them using the finest grade raw material and modern techniques. Also, the basic material is sourced from the reliable places. Our organization is avidly engaged in supplying an exclusive range of PVC Pipe Threading Machine at reasonable prices.   Details : The Pipe Threading Machine is used for Cutting External Thread on Steel Pipe by Chasing method. HSS Tangential Chasers are used as cutters. Pipe remains stationery and Die Head rotates. BSP, MATRIX, BSPT, NPT, UNF,UNC, BSW, Acme Threads can be cut on this machine depending upon the type of Chasers. The machine mainly consists the following : Base Head Stock Saddle Pillar Or Bed Type Clamping Vice Die Head The PVC Pipe Threading Machines are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirements are combined in this model to from the basic fundamentals of correct threading. All the gears are made of case hardened steel with extra large face with and tooth thickness and cut on hobbing machine for noiseless operation even at high speed. Naturally the are built with high standards of workmanship, material and quality so closely associated with Company Tradition. Design & Workmanship : The National Cutting Tools PVC Pipe Threading Machines are designed to produce quality threads within the to lerance for which they were intended. Head Stock : A heavy duty geared Head Box is of best quality casting providing support to the spindle bearings. The box is of gear type, lubricated, fitted with three extra heavy duty bearings. The Bed : The bed is pillar type having two pillars made of best quality steel nicely finished & duly hard chrome plated in the most modern hard chrome plating unit. The Saddle : The Saddle is fitted on two pillars very precisely. It runs on pillars very smoothly and accurately to the Head Stock alignment. The Apron : The apron gives movement to the saddle with head transfer along with pillars through steel rack and pinion arrangements. It's all gears are made of best quality steel. Vice Jaws : The vice jaws made from the best quality alloy steel are fitted on the saddle well aligned with the head stock center fitted in a heavy duty box type vice. The jaws are heat treated. The movements of jaws are controlled by a screw on the saddle. Range of NCT PVC Pipe Threading Machines and Die Heads. 3/8'' to 1.12'' do/- Capacity Pipe & Bolt 1/2'' to 2'' do/- 1/2'' to 2.1/2'' do/- 1'' to 4'' Capacity Pipe 2.1/2'' to 6'' do/- 4 to 8 do/-

PVC Pipe Threading Machine, Bolt Threading Machine, Motor Parts

PVC Pipe Threading Machine, Heavy Duty Roll Turning Lathe Machine, paper mill

PVC Pipe Threading Machine, Heavy Duty Pipe Cutter Machines

pvc pipe threading machines