Rectifiers Dealers in Focal Point, Ludhiana

Rectifier is a transformer that converts A.C. into D.C. Supply. It is used in Electroplating, Anodising, Hydrogenation and all other Electroplating Processes. These are tailor made, covering a wide range from 10 amps. To 15000 amps. We can provide different output DC voltage as per requirement.(Standard rating are 8, 12, 16, 24 volts)

Rectifier is an economical and most efficient method of obtaining DC from AC supply. Jindal manufactures a wide range of rectifiers covering 0-500 Volts and upto 15000 Amps. capacity suitable for Electroplating, Anodising, Hydrogenation and many other Electrochemical processes. The entire manufacturing process is under one roof ensuring 100% quality control at every stage of production. We believe in quality & customers satisfaction. Starting Circuitry Jindal's Rectifiers are designed for 3 phase 50 Hz AC input supply and are available for operations at any voltage between 380 and 440 volts, covering a wide range of voltage fluctuations. It is recommended that the input to the rectifier should be connected through a proper protective device, to provide positive protection to personnel and the system, in the event of maintaining or in case a fault occurs. DC Output Control The function of the variable output controls is to control the voltage or current or its operating range by varying input voltage to the main transformer primary. The DC output voltage variation is achieved steplessly 0-100% by means of an ON LOAD roller type Jindal's make voltage regulator. Salient Feature Jindal's rectifier equipments are wound with electrolytic Prime grade italics to minimise power losses, in comparison to Aluminium italic conductor used by many other manufactures. Our equipments are designed liberally as per capacity and are ideally suitable for marginal over loading conductions. We use verticle Rolling contact type voltage regulator wound with heavy section of copper strips suitable for 100% continuous duty cycle for industrial applications, in comparison to conventional wire wound Regulators used by other manufacturers. The carbon rollers move on both sides of the winding. DIODE : Silicon diodes are tested in house, similar PIV batch and same forward drop diodes are used in the equipment for equal load sharing and reducing the power losses of diodes.  LAMINATION CORE : We use imported CRGO Lamination core which have minimum power losses and results in better efficiency of equipment and saving in energy bill. PAINTS : Epoxy paint is used which is resistant to acidic environment of plating process and enhance the life of the equipment by preventing it from corrosion. METER : We use reputed make AE/RISHAB make DC meters only which are very accurate and durable. CONSTANT VOLTAGE CONTROLLER (CVC) (OPTIONAL) : We offer CVC Electronic attachment with rectifier equipments, which will maintain constant Output Voltage or Current as per setting automatically-irrespective of input voltage variation. SERVICING : JINDAL'S have maintained enviable reputation in market in after sales services. This fact can be varified from any of our customers. Guarantee Our Equipments are Guaranteed Unconditionally for 1 Year against any Manufacturing Defect. We Shall not charge anything for Installation Servicing and Spares During the Guarantee Period.

We are offering electroplating rectifiers is an equipment that converts ac into dc supply. Power make silicon rectifiers are widely used in electroplating, anodizing, hydrogenation and all other electrochemical processes. These power rectifiers, anodizing rectifiers and electroplating power rectifiers are tailor made, covering a wide range from 200 amps to 15000 amps at different output dc voltage as per requirement.

• Phase: Three Phase
• Country of Origin: Made in India
• Voltage: 440 V
• Temperature Rise: 45 C
• Ripple Content: 5%
• Insulation: Oil cooled

• Phase: Three Phase
• Material: MS
• Brand Name: Bharti
• Frequency: 50-60 Hz
• Voltage: 1 Volt to 1000 Volt D.C
• Current: 10 to 20000 Amp

• Range: 500 Amps to 5000 Amps
• Available In: Step less and step controlled
• Features: Low Maintenance cost and Compact Design

With our cutting-edge technology, we specialize in providing to the valued clients optimum quality DC Rectifier for bright plants and nickel plants ranging from 500 Amps to 5000 Amps. The DC Rectifier is apt for converting AC into DC supply. We also offer Silicon Rectifiers suitable for Anodizing, Electroplating, Hydrogenation and other Electro Chemical processes. Our DC Rectifier can be tailor made as per the demands of the clients.

• Type: Regulator Rectifiers
• Application: As Per Order
• Condition: As Per Order
• Input Voltage: As Per Order
• Frequency: As Per Order
• Power: As Per Order
• Phase: As Per Order
• Warranty: As Per Order
• Certificate: As Per Order
• Brand Name: As Per Order
• Color: As Per Order
• Quality: As Per Order
• Item: As Per Order
• Name: As Per Order

• Input Voltage: 380 - 440 Volts, 3-phase 50 Hz. AC supply
• Output voltage: Fixed Rated maximum DC voltage or variable from zero to maximum rated voltage
• Output current: rated maximum DC current
• Temperature Rise: Less then 35ºC above ambient at the top of the oil
• Efficiency: 12V rect - 82%, 24V rect - 90%, 100V rect - 94%, 200V rect-96%
• Ripple Content: Less Than 5%
• Insulation: ‘A’ class for oil cooled

Salient Features: Electrolytic Prime grade copper strip to minimize power losses Suitable for over loading conditions Vertical rolling contact type voltage regulator The carbon rollers move on both sides of the winding Diodes: Silicon diodes are tested in-house, similar PIV batch Lamination Core: CRGO lamination core are used for minimum power losses Paints: epoxy paint which is resistant to acidic environment of plating process and provide insulation from rust Meter: DC meters with AE/RISHAB make Constant voltage controller (Cvc): CVC electronic attachment with rectifier equipment for maintaining output voltage or current Servicing: As early as possible

We are well-reputed Manufacturer and Supplier of Oil Cooled Rectifier. The Oil Cooled Rectifier converts alternate current into Direct current. Our Oil Cooled Rectifier is appreciated for its reliable and trouble free performance. We can customize the Oil Cooled Rectifier as per the demands of the customers. The Oil Cooled Rectifier can be availed at market leading prices from us. Works On AC input having 3 phases Attributes EfficientLow voltage consumptionRobust contractionLong service life

Electroplating rectifiers is an equipment that converts ac into dc supply. Volt star make silicon rectifiers are widely used in electroplating, anodizing, hydrogenation and all other electrochemical processes. These power rectifiers, anodizing rectifiers and electroplating power rectifiers are tailor made, covering a wide range from 200 amps to 15000 amps at different output dc voltage as per requirement. salient features: asthetic design minimum power losses less power consumption low maintenance trouble free operation long life advantages of roller type regulator: no wave form distortion at any load high power factors more than 0.95 is achieved the system is simple & can be easily repaired overall losses are less the copper section for particular current is 3 times higher in roller regulators than conventional construction: the transformer winding are built from paper insulated electrolytic winding conductor. The core is built up high grade cold rolled grain oriented silicon. Lamination all components of equipment are mounted on a frame work of mild steel housing is fitted with cooling pipes to provide a natural cooling. We provide vertical rolling contact type voltage regulator with heavy section of insulated copper strips suitable for 100% continuous duty cycle fitted with carbon roller assembly and operative life more than 1520 years. Built with high quality meters shunts indicators and switches in panel board.

voltage rectifiers, automatic voltage controller stabilizers

Rectifier is a device to change high voltage A.C to low voltage D.C used for different industrial application rectifier are available in range varying from 1 Volt to 1000...

DC Welding Rectifier, Arc Welding Machines, MIG welding machine

Planting Rectifier, Ultra Isolation Transformers, Automation System Design

automotive rectifiers, Abb Dc Motors, balancing transformer

Rectifiers, zinc plants, Dryers, Rubber, pvc lined tank, Mild Steel Tank

Plating Anodizing Rectifiers, Single Phase Oil Cooled Power Transformer

Electroplating Rectifier, Bright Nickel Plating Barrel, Polypropylene Tanks

dc welding rectifiers, Arc Welding, mig tig welding machine, Welding Machine

Plating Anodizing Rectifiers, Three Phase Package Substations Transformers