Sandeep Industrial Corpn. Civil Lines, Ludhiana, Punjab

Twist free, steel construction with heavy cast iron feet. Quiet, vibration free, Requires no maintenance. Modern Attractive Design.

This type of Sanding Machine is a Machine is a wonderful time and labour saver in any Wood Working shop where wide variety of curved work is to be Sanded. THE MAIN FRAME is well proportioned having a large base area to ensure steady vibration free running. THE TABLE is of graded cast iron having ground finish and is arranged to cant 45 degree below and 15 degree above the horizontal and can be locked where desired. THE SANDING BOBBIN is driven by an electrical motor while a reciprocating motion is given to the Bobbin by means of a Geared Motor. A screw adjustment is provided to enable the operator to raise and lower the bobbin slide to allow the full length of the abrasive paper to be used. The motion is operated by a wheel and machine cut steel gears.

This Machine can be used to paste PVC on Furniture, Cabinets, Speakers, relief doors, decoration Panels for walls and other abnormal decoration shapes with a special Silicon Sheet. It can also work with hot transfer and veneer. Features: 1. The Machine travel is operated manually. The working plate is fixed while the heating cabinet is movable. 2. The Vacuum is measured with vacuometer atomically. The temperature is controlled by computer

This Machine can be used to paste PVC on Furniture, Cabinets, Speakers, relief doors, decoration Panels for walls and other abnormal decoration shapes with a special Silicon Sheet. It can also work with hot transfer and veneer.The Electronic Part is fully Automatic and Digitalized control. The Components are produced by famous do mestic enterprises with good quality.Infrared Heating System and High Quality heat preservation material are used, which can ensure even heating and energy saving.This Machine uses integrated movement electromotor. It produces less noise and seldom breaks down.This Machine uses top Series vacuum pump. It is stable and reliable and the maintenance work is simple. (You can also opt for German-made Vaccuum Pump, which is strong and tough)The Equipment is compacted and can save a lot of space.The Electronic Part is fully Automatic and Digitalized control. The Components are produced by famous do mestic enterprises with good quality.Infrared Heating System and High Quality heat preservation material are used, which can ensure even heating and energy saving. This Machine uses integrated movement electromotor. It produces less noise and seldom breaks down.This Machine uses top 2X Series vacuum pump. It is stable and reliable and the maintenance work is simple. (You can also opt for German-made Vaccuum Pump, which is strong and tough)The Equipment is compacted and can save a lot of space.

This Machine can be used to paste PVC on Furniture, Cabinets, Speakers, relief doors, decoration Panels for walls and other abnormal decoration shapes with a special Silicon Sheet. It can also work with hot transfer and veneer. FEATURES : 1. The Electronic Part is fully Automatic and Digitalized control. The Components are produced by famous do mestic enterprises with good quality. 2. Infrared Heating System and High Quality heat preservation material are used, which can ensure even heating and energy saving. 3. This Machine uses integrated movement electromotor. It produces less noise and seldom breaks down.

This Machine can be used to paste PVC on Furniture, Cabinets, Speakers, relief doors, decoration Panels for walls and other abnormal decoration shapes with a special Silicon Sheet. It can also work with hot transfer and veneer. 1. The Machine travel is operated manually. The working plate is fixed while the heating cabinet is movable. 2. The Vacuum is measured with vacuometer atomically. The temperature is controlled by computer chips so that the heating speed is adjustable and the temperature can be perfectly managed. 3. This machine uses top 2X Series vacuum pump. It is stable and reliable and the maintenance work is simple (you can also opt for German-made vacuum pump, which is strong and tough).

This Machine can be used to paste PVC on Furniture, Cabinets, Speakers, relief doors, decoration Panels for walls and other abnormal decoration shapes with a special Silicon Sheet. It can also work with hot transfer and veneer. 1. The Electronic Part is fully automatic and digitalized control. The Components are produced by famous domestic enterprises in good quality. The Temperature is controlled by computer chips so that the heating speed is adjustable and the temperature can be perfectly managed. 2. Infraed Heating system and high quality heat preservation material are used. Which can ensure even heating and energy saving. 3. This machine uses integrated movement electromotor. It produces less moise and seldom breaks down. 4. This machine uses top 2X Series vacuum pump. It is stable and reliable and the maintenance work is simple (You can also opt for German-made vacuum pump, which is strong and tough)

The machine is a batter choice to the traditional double spindle shaper, and best suitable for the process of extra long and hard processing workpiece Maximum Shaping Width MM:360.

This Machine can be used to polish various boards by giving thickness and it suits to polish solid board, veneer board, shaving board, middle-density fibrous board etc. This machine index is advanced and it is in high precision, reasonable composition, modern construction and convenient operation it has the world advance level.

• Robust machine Frame. • Digital Display of Vertical Heads running on High Precision Linear Guideways Bearings. • One Sided, fixed carriage for clamping. • Solid Aluminum Drilling Blocks, due to which no Vibration. • SANDEEP quick Swiveling Drill Blocks fixing at 0º-45º-90º • Continuous 32mm Pitch of each head. • 80mm Pitch for Row holes. • 2.2 KW Drilling Motors with High RPM and 2750 Min. • Pneumatic Cylinder Ø100mm for Strong Drill Feed. • 100mm Vertical and Horizontal Stroke.

- A highly efficient, robust and precision machine. - Table is provided with two rollers for smooth feeding of the stock and has rise and fall arrangement. - Cutter block is made of special alloy steel, ground and dynamically balanced. It has a speed of 6000 r p m andcarries four knives to provide excellent finish. - Feed and Discharge pressure guides the timber in the immediate vicinity of the cutter head. - A sturdy backlash safety feature is incorporated in the machine.

Tenoning Machine provide a widest range of high precision metal components at the most competitive prices for its ever growing customer base. Table Tilt (Workpiece Fence Swivelling).

• Main Frame of heavy duty construction to eliminate vibration. • Extra Large tables to provide adequate support to the job. • Tables ground to high degree of finish to ensure high accuracy of planning. • Cuter block dynamically balanced to ensure smooth running and to eliminate back thrust while planning. • Cutter block guards provided to ensure safety in operation. • Dust Chute provided to enable the machine to be connected to main Dust Extractor.

A Pleasing design and perfectly smooth running of the machine.The main frame of the machine is thick walled single piece construction, which provides sturdiness and massive stability to the machine.Table of the machine is of high grade casting suitably ribbed to maintain a perfectly flat table surface even after years of use.Heavy duty fence with dust chute is provided on the machine.A dynamically balanced spindle running at high speed.Raising and Lowering of spindle by means of hand wheel in front of the machine and can be locked at any position.Machine provided with spindle lock. Emergency Stop provided in front of the machine.

INTERCHANGEABLE SPINDLES: Choice of 3 spindle diameters (¾”, 1”, 1- ¼”) or choice of metric sizes – 19mm, 25.4mm, 30mm. Spindle has MK5 taper to ensure precision fitting and flow quick changeover. QUICK CHANGE SPINDLE SPEEDS: The spindle is driven by a four – speed dynamically balanced pulley for spindle speeds of 3000, 4500, 7500 and 10000 rpm. Change of speed is quick and easily accomplished by simply loosening a lock lever, and shifting the belt to the required speed setting. REVERSIBLE SPINDLE ROTATION: The spindle is reversible to ensure safe rotation in clockwise or counter – clockwise direction as well as providing the ability to climb cut glued panels. SPINDLE RAISING: the spindle is raised or lowered by a graduated hand wheel, providing 1 mm elevation per full revolution. Quick clamp lever positive holds spindle at a set height. TABLE INSERTS: The spindle is fittedtwo insert rings (6-3 8” & 8-5 8”) permitting for use of a wide variety of shaper cutters and spindle speed.

Spindle Speed : 3000 / 4500 / 7500 / 10000

* Automatic motorized movement is provided for Main Saw Blade raising & lowering through Linear Actuator. * Automatic motorized movement is provided for Scoring Blade raising & lowering through Linear Actuator whereby Saw Bridge can be may accurately canted up to 45 degree to any desired degree. * Extremely exact cut. No more cutting edge damages. Burr Free Cutting. Cutting Accuracy Less than 0.15 mm * Perfect Job Cutting on Wood, Plastic or Non Ferrous Metals.

to ensure that the customers of the company are provided with products which are of the top most quality. The combination of these professional, latest technology to provide a widest range of high precision metal components at the most competitive prices for its ever growing customer base.Working Pressure300T.kgcm2,M Q.ty and DIA of oil cylinder Main cylinder 8-140mm, Machine Net weight About : 15T, Heating method Steam.

Opening between Platens:300mm, Rated Oil pressure:24Mpa. Feeding Speed :15.5mmin. Machine Net weight:About : 15T. Installed Power:15Kw.

This Machine can divide wood of Panel into one go it is suitable for of furniture Production, decoration and Construction with compact structure.

This Machine has functions including gluing, Hot Roll Press and Paper Cutting, Upper Pressure Roller is driven by air Pneumatic. It enables work continually and be operated easily.

This Kind-covering machine is using hot melt glue.Which suitable for processing with veneer in single sheet or in rolls.The Glue application is even distributed and with a smooth surface covering.This type of machine can process all kinds of complicated profiles in high speed and finish.The Finishes products will be used furniture and Windows and Door Production. Kick Board, Set Lines of Door and Windows, Railings of Stairs, Top Scripts, Door Frame, Panel for protecting the Wall, Wall Line, Waist Lines, Mirror Frames, Painting Frame Lines, Drawer bottoms, Composite Door Sets, Aluminium or Steel Door and Windows, PVC Porous material, Wood-Like Material, Floor and so on.

The optimal high Cutting Capacity and advanced features at an exceptional price. Class leading performance achieved through pioneering technology define the automatic Panel Saw. Quality and Reliability are second to non, making this the saw you can count on. • The Machine frame made from welded quality steel at low temperature, aged treatment and precisely machined, ensuring a stable and reliable performance. • The Saw carriage adopts imported superior straight-line guide way, high accuracy, wear resistance, self-cleaning. • The Saw Carriage of Sandeep Beam Saws is driven by an imported power torque reducer. • The Pressure Beam adopts sway bar synchronous design to guarantee the pressure beam synchronous elevation, ensuring no panel excursion. • The Machine is designed with Multiple Positioning Fence. • Emergency Stop Device guarantees the safety of people and machine.

With complete functions and reliable performance, it is the best choice for office furniture and modern kitchen cabinets. With good flexibility, Multi-shapes materials, it is very suitable for different laminated materials.

Hot Press has heating system and heat-transfer system elaborately designed, with low heat energy consumption and even heat transfer. The reasonably-designed structure, precise component processing, wide regulating range of process parameters and reasonably-designed controlling process will meet various process requirements of the productions of cover planks. Hot Press is necessary for a medium-sized secondary processing furniture factories and sized secondary processing factories of man-made boards, used for gluing of furniture boards, broken parts of construction, wooden doors (namely, to glue man-made boards and inner frames) and various sorts of man made boards to press various sorts of decorating materials onto plywood, Joiner’s boards, medium density fiber boards and particle boards, such as decorating papers, decorating cloth, melamine fireproof boards, tinsels, man made and natural splints floriations of natura splints, and for smoothing and dying single boards, shaping and smoothing colorized decorating boards. The running cost of our Thermo Fluid Hot Press is very low compared to Electric Element Heated Hot Press.