OPACITY Analyzers
A Dust particulate monitor is a device that is mounted in the discharge stack of a dust collector and continuously monitors the amount of particulate discharge. The particulate monitor uses a technology known as Triboelectric or Triboelectricity. When two different materials come in contact, it is likely that one will leave with more electrons than it started with and the other will leave with less, this is called Triboelectric Effect. The interaction between the probe and particles produces a charge transfer within the probe. The charge is then converted to an output signal.Dust Particulate Monitoring systems TECHNICAL SPECIFICATION Measuring Principle Dynamic Detection Principle, DDP (Scintillation) Operating Wavelength 510 – 540 nm (green LED)Measurement Reading Concentration (mg/m3)Measuring Range 0 – 1000 mg/m3 (user configurable)Path Length (duct diameter) 0.5 – 10 m (flange-to-flange separation)Accuracy + / - 2 %Flue gas flow rate ! 1.0 m/sResolution 0.1 mg/m3 (display resolution)Damping 1 – 60 s (user selectable)Drift with Temperature < +/- 0.5 %.POWER AIR REQUIREMENTS Voltage +24 Vdc (optional 90-260 Vac PSU available)Nominal Current Consumption 400 mAPower Up Current Consumption 400 mAPurge Air Supply Volume 50 – 200 L/min (to each air purge body)Purge Air Quality Suitably filtered, oil free and dryINTERFACE OPTIONS Serial Comms ModBus RTU via RS485Internal USB (OI)External USB (RX)Analogue Outputs 4.0 – 20 mA (isolated and scalable)Relay Contacts 3 A @ 30 Vdc (signal level and service alarms)PHYSICALAmbient Operating Temperature -20 – +55 °C (air temperature around the equipment)Exhaust Gas Temperature Up to +600 °C (heat insulating gaskets included)Ambient Operating Humidity 0 – 100 %Ingress Protection IP65 for external useMaterials 316 Stainless Steel (powder coated)Dimensions 153 x 120 x 122 mm (measuring head)Weight 2.5 kg per head Specification :Range 0-1000 Mg/M3Sensor Base Systems StyleIntegral & RemoteRemote Sensor Enclosure: Cost Aluminum, Electrostatically powder coatingProbe Material: 316 Stainless Steel (Slandered) other materials availableInsulator material: Extended High Performance (PFA) Temperature up to 250 C Ceramic (High temperature up to 550 Deg C )Electronics 18 – 32 V DC () at the unit 230V AC (Controller)Output: 4-20mA & SPDT RelayProbe Insertion length: 3” to 36” ( 7.6 Cm to 91.4 Cm)Installation Weld the supplied fitting into the pipe or Duct and insert Sensor Sensor Mounting Flanged ½” Male NPT Quick release.
...moreOnline SO2 Gas analyzer
Optional : 1. isolated RS - 485 Serial port with MODBUS RTU protocol output.2. SMARTLOG/ SCADA software for Online graph & data report for safety audit.3. Optional Programmable linear isolated4 - 20 mA / 20 - 4 mA Output with respect to gas Concentration.
...moreFlow Sensor
Digital water meters can also be used at the water source, well, or throughout a water system to determine flow through that portion of the system. These water meters typically measure and display total usage in cubic feet, cubic meters or US gallons on a mechanical or electronic register. Technical SpecificationFlow-rate range 0.5m/sec to 5m/sec.Accuracy +/- 1% of sull scale deflectionInput Voltage 3.4 to 24 VDC Out Put Voltage Square wave (Sinking) 30--35 Hz/meter/second Cable length 3 meters Protecting Rating IP-67 Operating Temp. with P.P Sensor upto 70 Deg C.with PVDF/ SS Sensor - upto 100 Deg C.
Type : Flow Sensors
Material : Plastic
Application : Industrial Use
Color : Black,Red
Condition : New
Warranty : 1year
Country of Origin : India
Brand Name : Sheetal Instrumentation
Accuracy : +/- 2%.
Output : Pulses.
...moreElectromagnetic Flowmeter
20,000 - 65,000 Per pcs
digital flow controller
it is used as batcher in flow control applications, as a fixed amount of water is needed in process.
...moreSS Flow sensor Paddle wheel type
5,000 - 10,000 Per pcs
customized automation services
Calibration Services
Commissioning Services
Be first to Rate
Rate ThisOpening Hours