Tangential Chaser Dealers in Ludhiana

• Usage/Application: Industrial
• Country of Origin: Made in India
• Brand Name: Poonam Industries
• Length: 7 Inch
• Width: 2 inch
• Thickness: 5mm

MSE Tangential Chasers are manufactured from imported High Speed Steel, which passes through exacting metallurgical standard. Experienced heat treatment with the automatic imported heat treatment plant and imported Testing equipments assure that our Tangential Chasers perform satisfactorily in service and produce quality threads within the tolerance for which they are intended.The Tangential Principal of Design :MSE Chasers, designed as per International Threading Standard, provide line contact with the work to provide natural clearance comparable to that of a lathe tool. Friction at the cutting edge, thread distortion and chaser wear are minimized at the tangential location of the chaser, in respect the work plaxes it in a direct line with the cutting action exerted in forming the thread. Rigidly supported in this natural cutting position by the die head chaser holder, the resulting longitudinal absorption of cutting strains reduces vibration and chaser breakage.Depending upon the size of the die head in which they are used, Landies Tangential Chasers vary in length from 1”to 6”.During the re-sharpening process, it is unnecessary to remove the same amount of metal from each chaser in the set. When one chaser is worn. Chipped or damaged to the extent that an abnormal amount of metal must be removed, it can re-grinded and returned to service although much shorter than the other chaser in the set.Die Head Capacity Chaser Section Die Head size 1/4” to 1” Chaser size 3” x 1.3/64 (Set of 4 Pcs)Die Head size 3/8” to 1. 1/2" Chaser size 4” x 1.3/64 (Set of 4 Pcs)Die Head size 1/2” to 2” Chaser size 4” x 1.1/4” (Set of 4 Pcs)Die Head size 1” to 4” Die Head size 1” to 2” Chaser size 4” x 1.1/4” (Set of 4 Pcs) Die Head size 2.1/2” to 4” Chaser size 5” x 2.1/4” (Set of 4 Pcs) Die Head size 2.1/2” to 6” Die Head size 2.1/2” to 3” Chaser size 5” x 2.1/4” (Set of 6 Pcs) Die Head size 3 1/2” to 4” Chaser size 5” x 2.1/4” (Set of 6 Pcs) Die Head size 4.1/2” to 6” Chaser size 5” x 2.1/4” (Set of 6 Pcs) Die Head size 4” to 8” Die Head size 4” to 5.1/2” Chaser size 5” x 2.1/4” (Set of 6 Pcs) Die Head size 5.1/2” to 8” Chaser size 5” x 2.1/4” (Set of 6 Pcs)

• Price: Rs 200 / Piece

Buyers can place bulk or retail orders with us all year round and expect on time delivery of consignments. Product packaging is done using industrial grade materials by us to ensure safe and undamaged delivery of consignments. Further, we provide tailored packaging solutions.Features : Fine finish Durability Rust resistance

Tangential Chasers are primarily used for external threading of rods, pipes and bog bolts. We are enlisted among the top Manufacturers, Exporters and Suppliers of Tangential Chasers from Punjab, India. The Tangential Chasers offered by us are manufactured in accordance with the international threading standards. The quality of our Tangential Chasers is approved by various reputed industries.

We stringently make complete arrangements for the vigil examination of the inputs used for the products. By this, we are capable of bringing forth reliable products that are presented after complete inspection and examination by the experts. We maintain proper schedules for the delivery of bulk or urgent consignments so as to deliver the range in set time and gain utmost customer satisfaction.   Die Head Capacity Chase Section Die Head size 1/4 to 1 Chaser size 3 x 1.3/64 (Set of 4 Pieces) Die Head size 3/8 to 1. 1/2" Chaser size 4 x 1.3/64 (Set of 4 Pieces) Die Head size 1/2 to 2 Chaser size 4 x 1.1/4 (Set of 4 Pieces) Die Head size 1/2" to 2.1/2 Chaser size 4 x 1.1/4 (Set of 4 Pieces) Die Head size 1 to 4 Die Head size 1 to 2 Chaser size 4 x 1.1/4 (Set of 4 Pieces) Die Head size 2.1/2 to 4 Chaser size 5 x 2.1/4 (Set of 4 Pieces) Die Head size 2.1/2 to 6 Die Head size 2.1/2 to 3 Chaser size 5 x 2.1/4 (Set of 6 Pieces) Die Head size 3 1/2 to 4 Chaser size 5 to x 2.1/4 (Set of 6 Pieces) Die Head size 4.1/2 to 6 Chaser size 5 to x 2.1/4 (Set of 6 Pieces) Die Head size 4 to 8 Die Head size 4 to 5.1/2 Chaser size 5 to x 2.1/4 (Set of 6 Pieces) Die Head size 5.1/2 to 8½ Chaser size 5 to x 2.1/4 (Set of 6 Pieces)

We manufacture Threading Tangential Chaser from metallurgical standard proven imported high grade Steel. These Threading Tangential Chasers enable manufacturing of natural and fine threads. These Landis Tangential Chasers are available in various lengths ranging from 1� to 6�depending on the size of the die head. BSP, BSPT, NPT, UNF, UNC, BSW threads can be excellently cut on our Tangential Chaser. The Threading Tangential Chaser is processed with heat treatment in the Automatic Imported Heat Treatment Plant and Imported Testing equipment. We are rated among the leading Thread Cutting Chaser Manufacturers in Punjab. Types Of Threading Tangential Chaser Thread cutting chaser Pipe threading chaser Bolt threading chaser Rod threading chaser Note : IMC Chasers are interchangeable. If one PC of a chaser set is damaged & is beyond use then, same no. of PC of the other chaser set lying in stock may be used and there will be no difference in threading performance. The damaged set can be replaced without the necessity of replacing entire set.

• Brand Name: NBESON
• Country of Origin: Made in India
• Usage/Application: External Threading
• Material: HSS
• Features: Durable Work Life, Low Maintainence

• Automation Grade: Fully Automatic
• Country of Origin: Made in India
• Usage/Application: Industrial

These Chasers are suited for Linco, Landies, Landmatic, Landex, Kandal, Gents, Heap Die Head, Wagner, Redilmatic Die Head and also provide as per customer's requirement drawing or sample.These Chasers are of standards, heattreated, tangential principal of design, provides line contact with the work to provide natural clearance, friction at the cutting edge, thread distortion and Chaser wear is minimum. The longitu­dinal absorption of cutting strains, reduce vibration and Chaser breakage. Their length allows maximum amount of regrinding and provides exceptionally long lifeThese Chasers are available in Milled Thread as well as Ground Thread.

Tangential Chasers are manufactured for external threading of components which are hard to roll such as Big Bolts, Fasteners or Pipes. The Tangential Chasers are suitable for Landis, Lanco, Landmatic, Gents and Wagner type die heads. Our Chasers are made for all Threading Standards and Die Head Sections in 4 piece and 6 piece sets. The Tangential Chasers are fabricated from HSS-M2 Steel. The Chasers are known for accurate thread profile and correct parameters with respect to fitting and setting on die heads. We manufacture Tangential Chasers for all thread standards viz. We would like to introduce ourselves as one of the most efficient Tangential Chasers mfg. in India. These Tangential Chasers are designed as per international threading standard.

We are a celebrated Manufacturer, Exporter, and Supplier of Tangential Chaser from Punjab (India). Manufactured from metallurgical standard proven imported high speed steel, these Tangential Chasers are designed according to the international threading standard. Available in the length range from 1" to 6" according to the size of the die head, these Tangential Chasers help in the cutting of BSP, BSPT, NPT, UNF, UNC, BSW threads. Tested and manufactured in automatic imported heat treatment plant using imported testing equipments, these interchangeable Tangential Chasers have high efficiency. Die Head Capacity Chase Section Die Head size 1/4 to 1 Chaser size 3 x 1.3/64 (Set of 4 Pieces) Die Head size 3/8 to 1. 1/2" Chaser size 4 x 1.3/64 (Set of 4 Pieces) Die Head size 1/2 to 2 Chaser size 4 x 1.1/4 (Set of 4 Pieces) Die Head size 1/2" to 2.1/2 Chaser size 4 x 1.1/4 (Set of 4 Pieces) Die Head size 1 to 4 Die Head size 1 to 2 Chaser size 4 x 1.1/4 (Set of 4 Pieces) Die Head size 2.1/2 to 4 Chaser size 5 x 2.1/4 (Set of 4 Pieces) Die Head size 2.1/2 to 6 Die Head size 2.1/2 to 3 Chaser size 5 x 2.1/4 (Set of 6 Pieces) Die Head size 3 1/2 to 4 Chaser size 5â�� x 2.1/4 (Set of 6 Pieces) Die Head size 4.1/2 to 6 Chaser size 5â�� x 2.1/4 (Set of 6 Pieces) Die Head size 4 to 8 Die Head size 4 to 5.1/2 Chaser size 5â�� x 2.1/4 (Set of 6 Pieces) Die Head size 5.1/2 to 8½ Chaser size 5â�� x 2.1/4 (Set of 6 Pieces)

We offer a wide collection of Tangential chaser such as thread cutting chaser, pipe threading chaser, bolt threading chaser and rod threading chaser. We stand amid the well known steel tangential chasers suppliers in India. We are specialized NCT threading tangential chaser manufacturer. This Threading Tangential Chaser is manufactured from metallurgical standard proven imported high speed steel. These NCT Threading Tangential Chasers are designed as per international threading standard, which assist us in manufacturing natural and fine threads. These Landis tangential chasers are available in various lengths ranging from 1” to 6”depending on the size of the die head. BSP, BSPT, NPT, UNF, UNC, BSW threads that can be excellently and easily be cut on this tangential chaser.   NCT Tangential Chasers are manufactured from imported High Speed Steel which must pass exacting metallurgical standard. Experienced heat treatment with the automatic imported heat treatment plant and imported Testing equipments, assures that they will perform satisfactorily in service and produce quality threads within the tolerance for which they ware intended.   NCT Chaser are interchangeable. If one Pc. Of a chaser set is damaged & is beyond use. Then same No. pc. Of the other chaser set lying in stock may be used and there will not be any difference in threading performance and the damaged set can be replaced without the necessity of replacing entire set.

• Country of Origin: Made in India
• Usage/Application: Threading
• Brand Name: LTI
• Automation Grade: Fully Automatic

Tangential Chaser, thread rolling wheel, Forged Ring Bolt

Tangential Chaser, Rod Threading Machine, Rebar Threading Machine

Tangential Chasers