Threading Machine Dealers in Ludhiana

• Country of Origin: India
• Type: Pipe Threading Machines
• Condition: New
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Brand Name: IMC

We offer well designed Threading Machines in India and abroad. The Threading Machines we offer is known for superb efficiency and low operational & maintenance cost. We are counted among the top Hydraulic Pipe Threading Machine Manufacturers, Suppliers, and Exporters. We offer Threading Machines at reasonable prices. The Hydraulic Pipe Threading Machine Consists of Base, Head Stock, Saddle, Bed or Pillar Type Clamping Vice, Die Head, Apron and Vice Jaws. Pillar Type Hydraulic Threading Machine comes with self opening the die head with head stock gears hardened with power pack, with one hydraulic cylinder for lead screw box nut engaging, one hydraulic clamping cylinder and one hydraulic cylinder for die-head opening with micro switches with automation with control panel. Suitable For Matric BSP BSPT NPT UNF UNC BSW Acme threads B.S.F. threads Range 1/2″ to 2.1/2″ Capacity Pipe 1″ to 4″ Capacity Pipe 2.1/2″ to 6″ Capacity Pipe 4″ to 8″ Capacity Pipe About Components Head Stock : A heavy duty geared Head Box is of best quality casting providing support to the spindle bearings. The box is of gear type, lubricated, fitted with three extra heavy duty bearings. The Bed : The bed is pillar type having two pillars made of best quality steel nicely finished & duly hard chrome plated in the most modern hard chrome plating unit. The Saddle : The Saddle is fitted on two pillers very precisely. It runs on pillars very smoothly and accurately to the Head Stock alignment. The Apron : The apron gives movement to the saddle with head transfer along with pillars through steel rack and pinion arrangements. It’s all gears are made of best quality steel. Vice Jaws : The vice jaws made from the best quality alloy steel are fitted on the saddle well aligned with the head stock center fitted in a heavy duty box type vice. The jaws are heat treated. The movements of jaws are controlled by a screw on the saddle.

One of the foremost Suppliers, we are a known for the exceptional Rod Bar Threading Machine in the market. Our dedicated staff and quality auditors take care of the complete manufacturing of the products, even the raw material sourced at the initial stages are checked on the grounds of quality.

PVC Pipe Threading Machine is widely used for the purpose of threading PVC pipes of different sizes. Our PVC Pipe Threading Machine is manually operated and very simple-to-use. PVC Pipe Threading Machine that we offer has spindle RPM of 60, 101 and 134 (approx.). Our PVC Pipe Threading Machine is appreciated for sturdy construction, low maintenance and longer functional life. Features : The pillar type pipe threading and end facing machines are best suited for the tube mills, scaffolding equipment manufacturers, small pipe component manufacturers and allied industry. These machines are most robustly and ergonomically designed to give best and long term performances in most sever conditions. sic The tooth of the gears in the head stock are most precisely cut on the hear hobbing machine to give noiseless operation and then are undergone for the heat treatment Of flame hardening which leads to the lesser wear tear and hence leads to longer life of the gear. The spindle mounted in the headstock is provided with taper roller bearings to carry out the heavy-duty operations and all time accurate and noiseless operations. After long-term use if backlash is found in the bearings then it can be removed with the slight adjustment of check nut and locknut. The surfaces of the pillar guide-ways are grounded and are provided with hard chrome plating for smooth operation and lesser wear and tear during operation. The clamping device is provided with single set of clamps for small 0.D pipes and double set of clamps for greater 0.D of the pipes. The tooth of the clamps are insert type so that, this portion is worn out then only inserts can be easily changed rather than changing the whole of the clamp. For the threading machine the adjustment for the die-head can be done with the single hand operation with the box spanner, which is provided with the die-head.   Details : capacity 12mm to 65mm, motor power 5 HP., with lead screw arrangement various thteads. capacity 25mm to 100mm, motor power 7.5 HP., with lead screw arrangement various threads. capacity 65mm to 152mm, motor power 10HP., with lead screw arrangement various threads. capacity 100mm to 200mm, motor power 15HP., with lead screw arrangement various threads.    Price : 3000 USD min

Range of Imc Threading Machines and Die Heads. 1/4" to 1" Capacity 3/8" to 1.1/2" Capacity 1/2" to 2.1/2" Capacity 1" to 4" Capacity Pipe 2.1/2" to 6" Capacity 4" to 8" Capacity specifications: model No.: 1/4" to 1" saddle Movement: 10" spindle Speed Range: 60-90 number of Spindle Speed: 2 threading Capacity: 1/4" to 1" production per Hour: 60-80 h.p. Required: 3 H.p. lead Screw: Optional weight (kg) Aprox.: 500 model No.: 3/8" to 1.1/2" saddle Movement: 10" spindle Speed Range: 60-90 number of Spindle Speed: 2 threading Capacity: 3/8" to 1.1/2" production per Hour: 60-80 h.p. Required: 3 H.p. lead Screw: Optional weight (kg) Aprox.: 550 model No.: 1/2" to 2.1/2" saddle Movement: 12" -16" spindle Speed Range: 60-90 number of Spindle Speed: 2 threading Capacity: 1/2" to 2.1/2" production per Hour: 70-90 h.p. Required: 7.5 H.p. lead Screw: Optional weight (kg) Aprox.: 990 model No.: 1" to 4" saddle Movement: 10" - 12" spindle Speed Range: 40-75-115 number of Spindle Speed: 3 threading Capacity: 1" to 4" production per Hour: 35-40 h.p. Required: 12.5 H.p. lead Screw: Provided weight (kg) Aprox.: 1600

• Type: Threading Machines
• Weight: 100-1000kg
• Condition: New
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Driven Type: Electric, Hydraulic, Mechanical
• Warranty: 1year
• Brand Name: TWMT

we have come up as one of the distinguished traders, suppliers, exporters and distributors of qualitative automatic threading machines, hydraulic threading machines, thread rolling machines, threading machines, pipe threading machine, pvc pipe threading machine, bar & rebar threading machine and others. All these machines are highly appreciated and demanded amongst our valuable clients for their supreme quality and smooth functioning. We are successfully catering to the varied demands of the wide spectrum of clients worldwide. Our dedication towards offering our clients with optimum quality products, has enabled us setup a strong foothold in the industry. We possess a sophisticated infrastructure, which is well equipped with all the high end tools and machines. Further, we are backed by skilled and experienced team of experts. Our dedicated and talented team of professionals gives us the strength to fulfill to varied requirements of our esteem clients with maximum proficiency.

• RS - 001: One Country Die Head Machine (2½' x 8½") with Single Die Head System for Threading of Bolts , Centre Bolts and U - Bolts etc. (Threading Size upto 15" long) for Mass production Motor Required 2 H.P
• RS - 002: One Country Die Head Machine (3½' x 8½") with Double Die Head System for Threading of Bolts , Centre Bolts and U - Bolts etc. (Threading Size upto 18" long) for Mass production Motor Required 2 H.P

we are offering double die head threading machines. from our establishment day, we have operated as a company that is managed professionally under the able guidance of our visionary mentor. double die head threading machines come in two models. rs 001 is provided with single die head systems meant for the threading of u – bolts, center bolts and many others. the model requires a motor of 2 h.p. for mass production. rs 002 model is designed for threading of 18' long bolts and is provided with double die head system.

Using only quality raw materials, our entire range of products is manufactured. We make sure that the raw materials we use are thoroughly checked against varied quality parameters. According to your convenience, to pay for an order, our company can settle on a method of payment. We are familiar with online and offline payment methods. We only want to make payment safe and secure for you.   Details : The Rod Threading Machines are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirements are combined in this model to from the basic fundamentals of correct threading. All the gears are made of case hardened steel with extra large face with and tooth thickness and cut on hobbing machine for noiseless operation even at high speed. Naturally the are built with high standards of workmanship, material and quality so closely associated with Company Tradition. The Rod Threading Machine is used for Cutting External Thread on Rod by Chasing method. HSS Tangential Chasers are used as cutters. Rod remains stationery and Die Head rotates. BSP, MATRIX, BSPT, NPT, UNF,UNC, BSW, Acme Threads can be cut on this machine depending upon the type of Chasers.   The machine mainly consists the following : Base Head Stock Saddle Pillar Type Or Bed Type Clamping Vice Die Head Design & Workmanship : The National Cutting Tools Rod threading machines are designed to produce quality threads within the to lerance for which they were intended. Head Stock : A heavy duty geared Head Box is of best quality casting providing support to the spindle bearings. The box is of gear type, lubricated, fitted with three extra heavy duty bearings. The Bed : The bed is pillar type having two pillars made of best quality steel nicely finished & duly hard chrome plated in the most modern hard chrome plating unit. The Saddle : The Saddle is fitted on two pillars very precisely. It runs on pillars very smoothly and accurately to the Head Stock alignment. The Apron : The apron gives movement to the saddle with head transfer along with pillars through steel rack and pinion arrangements. It's all gears are made of best quality steel. Vice Jaws : The vice jaws made from the best quality alloy steel are fitted on the saddle well aligned with the head stock center fitted in a heavy duty box type vice. The jaws are heat treated. The movements of jaws are controlled by a screw on the saddle. Range of NCT Threading machines and Die Heads. 3/8'' to 1.12'' do/- 1/2'' to 2.1/2" do/-

• Type: Hydraulic Threading Machine
• Weight: 3000-4000kg
• Color: Light White
• Voltage: 440V
• Condition: New
• Automatic Grade: Semi Automatic
• Power: 9-12kw
• Driven Type: Hydraulic
• Warranty: 1year
• Country of Origin: India
• Brand Name: Baco Smith
• Material: Casting
• Pressure: 30 ton
• Production Capacity: Na
• After-Sales Service Provided: Yes

We Stand in the Midst of Specialized Circular Thread Roller Exporters. We Manufacture High Quality Thread Roller from Superlative Quality Raw Materials that Make Them Durable and Highly Resistant to Various Climatic Factors. We are One of the Predominant Flat Die Thread Roller Suppliers from India. These Thread Rollers are Manufactured as per International Standards, Under the

• Brand Name: UMTC Lathes
• Material: Top Grade
• Country of Origin: Ludhiana
• Condiiton: New

Clients can avail high performance Pillar Type Pipe Threading Machine from us. Pillar Type Pipe Threading Machine, available with us, is highly appreciated for demanding very low maintenance. Corrosion resistant Pillar Type Pipe Threading Machine, that we provide, is in extensive demand, owing to its broad industrial applications.

• Material: MS AND HOT DIE STEEL
• Power: 2 HP
• Usage/Application: Construction
• Screw Threads: DEVDUTT
• Automation Grade: Automatic
• Size: 38MM

• Brand Name: Verma sons
• Voltage: 220-240 V
• Frequency: 50 Hz
• Power Source: Electrical
• Body Material: Mild Steel

The 3 rollers H-3R rolling machine operate hydraulically.The simultaneously and concentricity of three forces at 120 o assure stability of the work piece during the rolling and as a consequence the maximum geometrical precision of the work piece.The elimination of the support blade consents a better finishing of the piece and execution of perticularly delicate profiles.The machine is suitable for rolling pipes,lapping work,threading with a high class precision and for mass production of scaffolding pipe jacks screw etc.

• Size in Inches: 1/4" to 1", 3/8" to 1.1/2", 1/2" to 2.1/2"
• Size in MM: 6mm to 30mm , 9mm to 45mm, 12mm to 65mm

The RodBar Threading Machine is use to cut the external threads with the help of Tangential chaser. Chaser is use as a cutter in Machine. The Component remain still, Die-head rotates and different type of threads can be cut such as BSPT, BSW, BSP, NPT, UNF, METRIC, UNC, ACME, BSF Threads. RodBar Threading Machine are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirements are combined in this model to from the basic fundamentals of correct thread. All the gears are made of case hardened steel with extra large face with and tooth thickness and cut on hobbing machiness for noiseless operation even at high speed.

• Automatic Grade: Automatic
• Length Of Bed: 1830 mm
• Type of Bed: Pedestral
• Motor Power: 1 hp

Rods Bars Threading Machine is use to cut the external threads with the help of Tangential chaser. Chaser is use as a cutter in machine. Rod Bar Component threading remain still, Die-head rotates.

• Size in Inches: 1/2" to 2.1/2" , 1" to 4" , 2.1/2" to 6" , 4" to 8"
• Size in MM: 12mm to 65mm , 25mm to 105mm , 50mm to 155mm , 100mm to 205mm

The Pipe Threading Machines are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum Conditions of severe with minimum maintenance . all the necessary requirements are combined in this model to from the basic fundamentals of correct threading. All the gears are made of case hardened steel with extra large face with and tooth thickness and cut on hobbing machine for noiseless operation even at high speed. Naturally they are built with high standard of workmanship, material and quality so closely associated with COMPANY TRADITION .

• Voltage: 440 V
• Brand Name: J.S Engg Works
• Automation Grade: Semi-Automatic
• Pipe Material: Mild Steel
• Threading Capacity: up to 50 mm

PVC threading machine in this model to from the basic fundamentals of correct threadings. All the gears are made of case hardened steel with extra large face with and tooth thickness and cut on hobbing machine for noiseless operation even at high speed. Naturally the are built with high standards of workmanship, material and quality so closely associated with COMPANY TRADITION.