Transformers Dealers in Ludhiana

• Certification: CE Certified
• Weight: 50-100kg
• Voltage: 110V
• Application: Stabilization
• Frequency: 50hz
• Automatic Grade: Automatic
• Power: 20-25kw
• Cooling System: Air Cooling
• Range: Upto 15 Mva 11 & 33 Kv Class
• Warranty: 1 year

• Usage: Industrial
• Product Type: OLTC Type
• Tappings: Tapings + 5% to 15% in steps of 1.25% or as per customer’s requirement.
• Range Of Transformer: Upto 3500 KVA
• Condition: New
• Primary voltage: Upto 33000 V

OLTC Transformers are used in: Chemical plant, Bottling plant. Paper mills, Sugar mills, Rolling mills, Steel mills. Industries which rely heavily on automation, where electronic cards, PLC and VFDs are used in operations and actuation. Vector GroupUnless Or Otherwise Specified, The Transformers Will Be Connected As Per Vector Group Reference Dyn11 In Accordance With International Practice.CoreThe Core Used Is Best Quality Cold Rolled Grain Oriented And Laser Processed Silicon Steel Sheet. They Provide Low Iron Loss, Low Noise, And Compact Size And Have The Best Performance For High Efficiency Transformers.WindingsWe Use High Quality Conductor Of Copper Aluminium In Our Products. Round Or Rectangular Copper/Aluminium Wires Ribbed With Thermally Upgraded Insulting Paper Are Applied In Oil Immersed Transformers. The Winding Have A Compact Size, Excellent Heat Transmission, Low Load Loss, High Lighting Impulse Resistivity And Outstanding Anti-Short- Circuit Strength.InsulationOur Oil-Immersed Transformers Are Insulated By Electrical Grade Insulated Press Board And Thermally Upgrade Insulating Kraft Paper.OilDehydrated Ehv-Grade Transformers Oil As Per Is 355 (1993) With Latest Amendments Is Used For Proper Insulation And Cooling After Testing For All The Parameters Viz A Viz Resistivity, Tan Delta, Bdv, Neutralization, Flash Point Etc.BushingsHV/LV Bushings: The Quality Porcelain Bushings Are Used On The High Voltage Terminals/Low Voltage Terminals. Optional Bushing Wells, Inserts And Elbows Are Available Upon Request. High Voltage Cables Are Inserted Directly And Show No Live Parts Outside.AccessoriesThe Accessories Include An Oil Filling Hole, Oil Drain Valve, Safety Valve, Standard Thermometer, Oil Level Gauge, Skid Wheel, Jacking Pad, Breather, Earthling TerminalOptional AccessoriesBuchholz Relay, Cooling Fan, HV & LV Cable Box, Cable Duct, Bus Bar Duct, Dial-Type Thermometer, Oil Level Gauge, On-Load Type Tap Changer, Protective Fuse And Lightning Arresters Are Available Upon Customer’s Request At Extra Cost.

• Country of Origin: India
• Type: Transformer Bushing
• Material: Metl
• Thickness: 10-12mm, 12-14mm, 14-16mm, 16-18mm, 18-20mm, 4-5mm, 6-8mm, 8-10mm
• Application: Automobile Industry
• Packaging Type: Paper Box
• Brand Name: Sharma

Bush

We are counted among the notable manufacturers and suppliers of a productive range of aluminum wires, copper wires, dpc wires. These products are valued for high quality, durability, dependability and gaurantee.

Shree Sai Krishna Industries is a renowned name for Manufacturing and Exporting of Transformer Lamination in the national as well as international markets. Our comprehensive range of Transformer Lamination can be availed by the clients in different sizes and shapes as the client̢۪s requirements. Features Excellent qualityHigh resistance to corrosionLow maintenance costHigh durability Used in Steel industryEngineering industryMechanical industry

• Brand Name: Muskaan's
• Phase: 3
• Country of Origin: Ludhiana
• Model Number: .

We have established our name in manufacturing Oil Filled Transformer. These High Voltage Transformers ensure smooth motor operation drawing 15-20% lesser current and maintaining 390400 volts along with the installation of servo controlled voltage stabilizer. Features: High quality Resonable pirce On time delivery Temperature Rise: Transformers are designed for a maximum temperature rise 4050ºC of oil and winding Lower temperature rise can be offered on request Standard Fittings: Rating and diagram plate Earthing terminals - 2 nos Lifting lugs Oil level indicator (plain) Drain-cum bottom filter valve with plug Oil filling hole with plug on conservator Oil conservator with drain plug Air release plug Silica gel air breather Bi-directional flat rollers HV terminals-outdoor bushings LV terminals-outdoor bushings Radiators Filter valve with plug Thermometer pocket Oil temperature indicator Externally operated off circuit tap changing switch Explosion vent Sampling value (for 2000 Kva & above transformers only) Accessories on Request: LV and HV cable boxes Winding temperature indicator (WTI) Buchholz relay Magnetic oil level gauge Marshalling box Disconnecting chamber Oil temperature indicator with electrical contacts (OTI) Pressure relief valve Specifications: Usage Power Coil Number Autotransformer

• Brand Name: Transware
• Phase: As per requirement
• Usage: Govt and Industrial
• Type: Outdoor/Indoor
• Coil Number: As per requirement

A distribution transformer is a transformer that provides the final voltage transformation in the electric power distribution system, stepping down the voltage used in the distribution lines to the level used by the customer. The invention of a practical efficient transformer made AC power distribution feasible; a system using distribution transformers was demonstrated as early as 1882. If mounted on a utility pole, they are called pole-mount transformers. If the distribution lines are located at ground level or underground, distribution transformers are mounted on concrete pads and locked in steel cases, thus known as pad-mount transformers.Distribution transformers normally have ratings up to 200 kVA, although some national standards can describe units up to 5000 kVA as distribution transformers. Since distribution transformers are energized for 24 hours a day (even when they don't carry any load), reducing iron losses has an important role in their design. As they usually don't operate at full load, they are designed to have maximum efficiency at lower loads. To have a better efficiency, voltage regulation in these transformers should be kept to a minimum. Hence they are designed to have small leakage reactance.

• Automatic Grade: Automatic
• Power: 1-3kw
• Application: Industrial Use
• Certification: CE Certified
• Voltage: 220V
• Phase Type: Three Phase

Our company is engaged in manufacturing, exporting & supplying of Furnace Transformer. We design and manufacture Furnace Transformer using advanced technology and optimum quality raw materials. The Furnace Transformer is used with arc or induction furnaces. The Furnace Transformer is extensively used in Aluminum industry, steel plants, gas factories, Calcium Carbide industry, etc. The Furnace Transformer comes with automatic cooling facility. We supply Furnace Transformer in different sizes with on load tap changer. Highlights DurableSuperior functioningHigh power transformerAvailable as per specific requirements

Silica Gel Breather, Blue Silica Gel Pouches, White Silica Gel Pouches

• Production Power: 750-1000kw
• Application: Industrial Use

Catering to the needs of the clients, we offer used power transformer. Even though used, the power transformer is available in excellent working condition. Our used power transformer is less power consuming and therefore highly energy efficient. We check the used power transformer on different parameters like safety, performance, durability etc. specifications voltage ratio 110000.433kv of rating 250 kva & 160 kva voltage ratio 11000.433 kv of rating 1200 and 2500 kva with oltc and one piece of 1000 kva servo unbalance required urgently why our used power transformer? efficient reliable low power consumption eco friendly

• Type: Electronic Ignition Coils
• Certification: As Per Order
• Application: As Per Order
• Weight: As Per Order
• Color: As Per Order
• Voltage: As Per Order
• Condition: As Per Order
• Operating Temperature: As Per Order
• Frequency: As Per Order
• Driven Type: As Per Order
• Phase: As Per Order
• Warranty: As Per Order
• Humidity: As Per Order
• Coil Type: As Per Order
• ignition coil: As Per Order

• Material: Cast Iron
• Finishing: Chrome Finish
• Driven Type: Electric
• Shape: Rectangle
• Power: 10-50 KW
• Cooling Type: Oil Cooled
• Operating Type: Automatic
• Speciality: Robust Construction, Easy To Use, High Efficiency, Reliable
• Usage: Industrial, Electricity Distribution
• Voltage: 440 V
• Mounting Type: Ground Mounted
• Type: Power Transformers
• Phase: Three Phase
• Country of Origin: India

We provide a wide range of high efficiency Electrical Transformer Parts that is highly valued in the markets. Our range of Power Transformer Parts includes aluminium member, breather, arc horn, M.S. clump, B.M.C. PG clumps, drain valve, air leave nut, oil gauge etc. Our Power Transformer Parts are manufactured from the finest quality raw materials under strict quality control. Today, we are well reckoned as one of the key Electrical Transformer Spare Parts Suppliers based in India. Demanded forExcellent performanceNon-abrasive natureAnti corrosive in natureHigh efficiencyDurability Available inAll Sizes 12mm,16mm,20mm,25mm, 32mm and 42mm

Transformers are designed by our expert engineers to meet specific technical requirement of our customers. Transformers rating, tapings, voltage ratio, impedence, losses, dimensions & winding Pattern and type of construction confirm to indian & international standards. Our distribution transformers are designed to meet stringent tests like short Circuit Test and Lighting Impulse Voltage Test. Our procurement and quality ensure best quality of raw materials. (Product Range 6.3 kva to 5000 kva)(Rated voltage 11, 22, 33 / 0.433, 0.455 kv)   Details : All transformers are designed as per reference standard IS : 2026, BS : 171, IEC : 76 note - for further content refer the pdf attached

• Warranty: 1 Year
• Applicable Standards: IS, IEC, ANSI, JIS, BS, DIN
• Packaging: Packed in good quality boxes

  Applicable Standards IS, IEC, ANSI, JIS, BS, DIN Packaging Packed in good quality boxes Application Industrial Use Certificate ISO9001:2008 Warranty 1 year

We are offering dry distribution transformers. High quality, highly efficient, dry type distribution transformer. Highly recommended for installation of such transformers in public areas like hotels, railway stations, malls, hospitals etc.

• Power: 50 W
• Winding Material: Copper
• Phase: Single Phase
• Voltage: 220 V

• Phase: Three Phase
• Cooling Type: Oil Cooled
• Usage: Industry
• Winding Material: Mild Steel
• Voltage Ratio: 11kV
• Frequency: 60 Hz
• Power Source: Electric