Variable Speed Motor Drives Dealers in Ludhiana (23 products available)

The Variable Speed Drive (ATV212) is a variable speed drive for 3-phase asynchronous motors from 0.75 kW to 75 kW. This Variable Speed Drive (ATV212) is specifically intended for the most commonly encountered fluid management applications in tertiary sector buildings (HVAC): heating, ventilation, air conditioning and pumping. Due to the eco-energy based design of Variable Speed Drive (ATV212), energy savings of up to 70% can be achieved compared to a traditional control system. Characteristics1. Altivar 212 covers motor powers between 0.75 kW and 75 kW on the following supplies : 200�240V 3-phase, from 0.75 kW to 30 kW, IP 21380�480V 3-phase, from 0.75 kW to 75 kW, IP 21380�480V 3-phase, from 0.75 kW to 75 kW, UL Type 12/IP 552. The dual port enables a dialogue tool and a communication network to be connected at the same time. Speed Range : 1:50Transient Overtorque : 110% - 60 s.Integrated EMC filters, categories C1 to C3 depending on modelCommunication bus most commonly used on the market integrated: Modbus, METASYS N2®, APOGEE FLN P1® and BACnet®. Optional: LonWorksComplies to international standards and certifications: UL, CSA, C-Tick and NOMnic technology enables a THDI < 30% to be achieved Benefits Preventative maintenance for reducing costs and optimising the equipment: fault alert, operating time, etc.Centered on Centralized Technical ManagementInstant viewing of the energy consumptionConnection to building supervision network using embedded protocols.Detection of failures for quick intervention: belt breakage, pump running dry, phase failure, supply fault, etc.Centered on user-friendlinesTools for installing, parametering and viewing the installation (remote graphic terminal in 6 languages, Multi-Loader, Bluetooth and SoMove Mobile)Compact sizeSimple maintenanceCentred on protectionContinuity of service assured.Dedicated �Building� series functions (fire mode, register monitoring, mechanical protection function, etc. Applications Ventilation Less noise pollution (airdraulic noise, motor noise, etc)Detection of transmission component breakageSmoke extraction: forced start with fault inhibitionAutomatic restartAllows register managementHeating and Air conditioning: Optimize control in fluid processingUse of PID controller (temperature, flow rate, pressure, etc.)Adjustable flow rates for better energy managementSuppression of mechanical resonancePumping Multi-motor configurationDetection of underload/overload, pump running dryPressure surge suppression for prolonging the life of the installationSleep/Wake functionLimitation of operating time at low speed

6SL3210-5BE17-5 : 11000

Sinamics v20 the cost-effective, reliable and easy-to-use drive for basic applications sinamics v20, the versatile drive for basic demands today, in an increasing number of applications in plant and machinery construction, individual automation and drive solutions are demanded that automate simple motion sequences with low associated requirements. With its compact sinamics v20, siemens offers a simple and cost-effective drive solution for these types of applications. Sinamics v20 sets itself apart with its quick commissioning times, ease of operation, robustness and cost efficiency. With seven frame sizes, it covers a power range extending from 0.12 kw up to 30 kw (16 hp up to 40 hp).

Input Phase : Three Phase

Motor Power : 0.75KW TO 400 KW

Brand : Other

Display : Digital

IP Rating : IP20

Output Type : Triple

Motor RPM : 1440 RPM

Automation Grade : Automatic

Output Phase : Three Phase

Input Voltage : 440VAC

Warranty : 1 Year

Brand : Schneider

Model Name/Number : ATV320U40N4C

Motor Power : 4KW

Input Phase : 3 - Phase

Input Frequency : 50hz

Output Current : 9.5A

Ambient Temp. : 50-55 deg

Acceleration Time : 0-999sec

Degree of Protection : IP20

Type : Ac Drive

Condition : New

Input Voltage : 110V, 220V

Automatic Grade : Automatic, Semi Automatic

Power Source : Electric

Warranty : 1yr, 2yrs

Field Voltage : 220 Volts D.C.

Thyristor drives Highly efficient operational speed control. High reliability, with a complete protection system. High precision, minimum maximum speed control range.

Applications : Readymade as per customer specification for various type of industries, Indoor or outdoor metering, control, protection, relay & automation for LV panel PLC & RELAY Based

System : 3 Phase, 3 or 4 wire, 50Hz

Rated Current : Upto 4000 Amps

Operational Voltage : 24/110/230v 415v AC

Rated Insulation : 1000v

Rated Service Voltage : 690v

Ambient Temperature : 45 Deg C

Short Time Current : 50KA for 1Sec, 105KA peak

Degree of Protection : IP42-IP54

Form of Sepration : Upto 3B/4B

Type Tested for : Short Time Current withstand Temperature Rise Degree of Protection

Bus Bar System : Interleaved above 1600A

Bus Bar : Aluminium or Copper

Ref. Standard : IEC61439-12009, IS:8623

Feeder Configuration : Semi Drowout or Fix Type

Sagar offers you the variety of accessories to enhance your machine capability. Grinding Head Speed Reduction Gear Box 2 Speed Speed Reduction Gear Box Variable Speeds Cross Feed Gear Box for Planomillers Milling Head ISO 40 Milling Head ISO 50 Extra Heavy Duty Milling Head 10 H.P - 20 H.P.

Brand : Schneider

Input Phase : Single Phase, Three Phase

Motor Power : 0.2 kW - Medium Voltage

Motor RPM : 2880 RPM, 1440 RPM, 960 RPM

Brand Name : Siemens

Input Voltage : 415V AC

Input Phase : Three Phase

Application : Industrial

Model Number : SINAMIC V20 6SL3210

Display : Digital

Output Type : Single

We deal in ac drives , plcs hmi ( human machine interface) & all type of electricsl panels. We have done many projects in the field of automation in many major companies. We can provide you better services on reasonable price.