Visual Inspection Equipment Dealers

Inspection table is equipment consisting of a three-track conveyor with a hood with lighting arrangement and visual inspection background of alternate black & white color. Inspection table have stainless steel structure with moving S.S. slat chain. Structure made out of S. S. square pipe & supported on adjustable bolts.   The central conveyor belt brings the bottle from the capping machine conveyor. These bottles are automatically bifurcated on the two adjoining conveyor belts & further on the side tables for operators sitting on either side of the table. The operators in turn pick up the bottles & visually inspect the bottles in the alternate white & black background to check for any particles in the liquid filled, sealed & breakage of bottle. After inspection the bottles are placed in the central track, which is transfer for labeling.    

IRIS is a non-destructive testing technology for pipes and tubes that uses ultrasonic waves.Many plant operators in the oil and gas and power production industries face the issue of increasing asset efficiency and life expectancy while maintaining safety and reliability. As a result, proper inspection of critical components such as pipes and tubes is critical to maintaining the plant's integrity.Internal Rotary Inspection System (IRIS) is a tube inspection system that can detect corrosion, pitting, and wall loss in boilers, heat exchangers, air coolers, and feed water heaters. IRIS is extremely versatile since it can be used on a wide range of tube diameters and wall thicknesses, and it is suited for both ferrous and non-ferrous materials. n IRIS probe is inserted into a tube flooded with water. The probe is fitted with a transducer that generates an ultrasonic pulse along a path parallel to the axis of the tube. A rotating mirror directs the ultrasonic pulse into the tube wall. The mirror is driven by a small turbine that is rotated by the pressure of water pumped into the tube. The ultrasound pulses are reflected by the inner-diameter (ID) wall and outer-diameter (OD) wall of the tube and the time-of-flight difference between the two diameters is used to calculate the wall’s thickness. As the IRIS probe is pulled, the spinning motion of the mirror results in a helical scan path ensuring full coverage of the tube. Merits of IRIS Tube Inspection Suitability for ferrous and non-ferrous materials. Detection of corrosion, pitting and wall loss. Accurate wall thickness measurements.     Sensitivity to both internal and external defects. Defect position can be located in relation to tube length. Flexibility as a back-up to remote field, magnetic flux leakage and eddy current inspections.

Get in touch for purchasing the Visual Bottle Inspection Machines of the fine quality within your budgetary limits. We are enlisted amid the illustrious Manufacturers and Suppliers of the Visual Bottle Inspection Machines from Maharashtra, India. Equipped with hi-tech parts and features, our Visual Bottle Inspection Machine delivers impressive results.   Operation : The central conveyor belt brings the bottle from the capping machine conveyor. These bottles are automatically bifurcated on the two adjoining conveyor belts and further on the side tables for operator sitting on either side of the table. The operator sin turn pick up the bottles and visually inspect the bottles in the alternate white and black background to check for any particles in the liquid filled, sealed and breakage of bottle. After inspection the bottles are placed in the central track.Salient Features : Designed as per cGMP - Current Good Manufacturing Practices compliance A machine structure is made from AISI 304 with matt finish. High-speed visual inspection with high output. Length can make as per customer requirement. PVC black & white board as per GMP norms Belt drives through gear motor with variable frequency drive. Provides guide for chain of UHMW self lubrication. Adjustable height of conveyor belt, to align with other machine of the line Self-alignment bearing for easy maintenance.

Can inspect Length, External and Internal diameters, Incomplete processed articles, Head cracks, Head height, Pitch, Thread numbers and Slanted thread, Broken pin.   Features Can check the presence/absence of a part in an object Check cut-on outer profile Inspect nuts, rods, washers, fasteners, O-rings, and special parts. Can check Visual and dimensional defects Achieve high speed, industrial automation and integration with our solutions Choose from Kanshi, FlatInspect, Shinsei, and Ryouten based on your product type and inspection needs Easy integration with the factory workspace. Enhance your assets including Robots & Cobots with AI capabilities Customize your solution to fit your product and people requirement   How does it benefit you? Inspect large products with 100% visual accuracy and find even the smallest defects Boost your production speed and reduce waste with faster processes Deliver reliable and accurate products to your customers and increase their satisfaction

• Applications: Electronics Manufacturing, Plastic Manufacturing, Cracks & Failure Analysis
•  Key Features: High resolution Camera Optics. Uniform and controllable LED light setup, Easy to use geometric measurement software.
• Maximum Load Capacity: 12.00 Kilograms
• Power Source: 110VAC (50/60HZ) ; 220 VAC (50/60HZ)
• Magnification: 20x to 40x, in 5 steps, magnifications can be decreased to 10x or increased upto 280x by use of auxiliary lenses
• Measuring Range: 250 x 175mm, with quick release in both x,y axes
• Profile Light: 9 segment led light source
• Surface Light: 64 segment programmable, rotating ring light enables correct lighting conditions for all applications
• Motorized Traverse: Optional
• Digital Read-Out: Yes
• Linear Encoders: Resolution 0.001mm/0.005mm/0.0005mm Options Available with DRO
• Display: Two 19 inch Icd flat screen monitors, one for the image, the other for tracing of parts to cad and display of measured results/ reports
• Inspection Tools: Scanning of irregular features, mouse point, edge tools like circle, arc point, length, tangential, peak poine, thread profile and cross hair for use like a profile projector, cross hair rotates for angle measurement on screen

• Style: Wifi
• Model Name/Number: Texim Wifi Borescope
• Brand Name: Texim
• Lighting Type: LED
• Is It Flexible: Flexible
• Technique: Display

Construction of S.S. matt finished body This is basically a inspection conveyor widely used for inspection empty bottles Special glass helps to show bottle in big size after washing of bottle to find out if any particles or dust or water is still there. Machine is synchronized with filling machine Vibration Free, Jerk Free, Noise less construction with the help

Inspection table is used to inspect the abnormalities in filling Inspection table is equipment consisting of a three-track conveyor with a hood with lighting arrangement and visual inspection background of alternate black & white color. Inspection table have stainless steel structure with moving S.S. slat chain. Structure made out of S. S. square pipe & supported on adjustable bolts. Salient Featuers A/c frequency variable drive. Direct gear drive. Length can be made as per customer requirement. PVC black & white board as per GMP norms. UHMW self lubrication guide below chain. SS elegantly matt finishing. Adjustable height of conveyor belt, to align with other machine of the line Self-alignment bearing for easy maintenance. Rigid vibration free construction for trouble free performance Technical Specification Direction of Movement** Left to Right Output * Up to 100 Containers/minute Number of Operator Four (2x2, Two Side Seated) Power Characteristics** 0.5 HP / 220 Volts / 50 Hz. Height of Conveyor ** 860 mm to 910 mm Machine Dimensions** 1880 mm (L) x 700 mm (W) x 1525 mm (H) Case Dimensions** 2150 mm (L) x 950 mm (W) x 1750 mm (H) Net Weight 200 Kgs. Gross Weight 425 Kgs. Approx