Acrylic Wall Putty Dealers in Madurai

Iris Paints Acrylic Wall Putty encompasses a superior formulation, based on acrylic resin. It is water based and specially designed for leveling and smoothening the undulations on interior walls, wooden surfaces and metal surfaces. It provides a smooth surface for paint application. Thinning, if required can be done by adding water and blending to a smooth paste. It dries and hardens on air - drying. Technical Data Physical State : Smooth Paste Thinner : Water, If required Method Of Application : Apply with putty knife Drying Time : Touch Dry - 20 Minutes, Hard Dry - 4 to 5 Hours Shades Offered : White Packing : Plastic Pile - 1Kg, 5 Kg & 20 Kg Directions for Use Clean the surface thoroughly by sanding with suitable emery paper to free from dust, dirt etc., Wipe off the surface with a cloth or cotton waste. Thinning of putty, if required can be done by adding water and blending to a smooth paste. Apply putty directly on primed wall using putty knife. Deep dents and pores should not be filled at a time but in thin layers. Allow to dry overnight and rub the wall with suitable emery paper The loose powder on the surface is to be wiped off with cotton waste. Repeat the process for second coat if required.

• Physical State: Smooth Paste
• Thinner: Water, If required
• Method Of Application: Apply with putty knife
• Drying Time: Touch Dry - 20 Minutes, Hard Dry - 4 to 5 Hours
• Shades Offered: White
• Packing: Plastic Pile - 1Kg, 5 Kg & 20 Kg

Acrylic Wall Putty Iris Paints Acrylic Wall Putty encompasses a superior formulation, based on acrylic resin. It is water based and specially designed for leveling and smoothening the undulations on interior walls, wooden surfaces and metal surfaces. It provides a smooth surface for paint application. Thinning, if required can be done by adding water and blending to a smooth paste. It dries and hardens on air - drying. Directions for Use Clean the surface thoroughly by sanding with suitable emery paper to free from dust, dirt etc., Wipe off the surface with a cloth or cotton waste. Thinning of putty, if required can be done by adding water and blending to a smooth paste. Apply putty directly on primed wall using putty knife. Deep dents and pores should not be filled at a time but in thin layers. Allow to dry overnight and rub the wall with suitable emery paper The loose powder on the surface is to be wiped off with cotton waste. Repeat the process for second coat if required.