Decorative Paint Dealers in Madurai

• Color: White
• Application: Wall Putty
• Packaging Type: Paper Packet, Plastic Bag
• State: Powder
• Feature: Long Shelf Life, Super Smooth Finish, Unmatched Quality
• Packaging Size: 10kg, 25kg

Avail from us Wall Tex Cement Based Wall Putty. The Polymer Cement Wall Putiy is formualted using special constituents such as white portland cement, minerals and polymer imported from Japan. The Wall Tex Polymer Cement Wall Putty is available in a powder form and has both inorganic as well as organic binding properties, and hence more effective as well as economical. Cement Based Wall Putty contains a special polymer which makes damp proof smooth surfaced wall.Mixing ProcedureTake required quantity of Wall Tex polymer cement wall putty in a bucket. Add slowly up to 50% of water. (For 1kg. Wall putty add up to 500ml of water), to the putty and make the mixture to form uniform paste. Keep the paste as such for 15minutes for the maturation. Once again mix the paste well to get a smooth uniform paste. Now the putty is ready for application.Application MethodFirst Make the surface free from dust, grease by means of sanding the wall with sand paper of putty knife or by wire brush followed by washing out with sufficient water. Ensure that the surface is clean and wet. It is very important to make the wall wet before the putty is applied.Apply the so mixed polymer cement wall putty paste on the wet wall by means of spreading evenly and gently with suitable putty knife. Apply the second layer after three hours. Allow the wall to dry over night. The wall is now sanded Properly by very using water paper medium, and fine papers followed by very fine paper. The dust so produced by sanding will be cleaned with water and allow it to dry.Always apply multiples of the layer instead of single thick layer. Please note that the paste so prepared is to be used within three hours. So kindly ensure mix only appropriate quantity only.Features of Wall TexSince it is made out of quality white portland cemend and polymer it imparts outstanding bonding property.No need of any prime coating or white cement coating is necessary either before or after application when wall tex putty is applied for emulsion or distemper type top coat to be painted. Water showering over the surface after the application, can be done. It provides damp proof surface, and hence it protect the wall. The surface applied with Wall Tex putty imparts anti fungal property. It is available in 8 colours It can also be available in any pastel colors of the customer's choice provided the minimum order quantity of 500 kgs. Since it is available in various pastel shades the quantity of the top coat is sufficiently reduced. It is highly economical (lesser price for more quantity) against usual conventional wall putty, since it can be made up to 1.5 times the quantity of its own by means of addition of water and further it imparts better coverage also. It is suitable for both interior and exteriors. It is particularly suitable for newly plastered walls, unlike other wall putty, since it is cement based. PackingPolymer cement wall putty is available in 20 kgs. 5Kgs. HDPE bags and 1kg pockets.Precautions If the wall putty is contacted with eye or mouth by accidentally, wash with plenty of water and clean thouroughly. Keep the content out of reach of children. Always keep the contents tightly tied and closed and kept in a dry place when not in use. Use the material within 6 months for best performance. The information contained in this leaflet serves as guideline only. Since the works with the product is beyond our control, our responsibility is limited to the products only. The company reserves the rights to modify or change or cancel this leaflet at any time without notice.

• Color: red,green,yellow,blue etc
• Application: Building Coating

• Country of Origin: India
• Application: Wall Putty
• Color: White
• Feature: Long Shelf Life
• Form: Powder
• Packaging Type: Plastic Bag
• Packaging Size: 25kg, 50kg

• Manufactured By: Veena Paints Pvt. Ltd.
• Material: Synthetic
• Product Code: Madura-625011
• Series: V-Tone
• Form: Liquid
• Shelf Life: 24 Months
• Application Method: Brush
• Color: White
• Brand: Veena's
• Primer Base Type: Oil Based
• Usage/Application: Wood
• Finish Type: Gloss
• Packaging Size: 500ml
• Packaging Type: Tin

• Zinc Rich Primer: Inorganic Zinc Silicate Primer

We are offering inorganic zinc silicate. 1k zinc rich primer, 1k inorganic zinc silicate primer, 1k polyurethane moisture cure primer.

Iris Paints Acrylic Wall Putty encompasses a superior formulation, based on acrylic resin. It is water based and specially designed for leveling and smoothening the undulations on interior walls, wooden surfaces and metal surfaces. It provides a smooth surface for paint application. Thinning, if required can be done by adding water and blending to a smooth paste. It dries and hardens on air - drying. Technical Data Physical State : Smooth Paste Thinner : Water, If required Method Of Application : Apply with putty knife Drying Time : Touch Dry - 20 Minutes, Hard Dry - 4 to 5 Hours Shades Offered : White Packing : Plastic Pile - 1Kg, 5 Kg & 20 Kg Directions for Use Clean the surface thoroughly by sanding with suitable emery paper to free from dust, dirt etc., Wipe off the surface with a cloth or cotton waste. Thinning of putty, if required can be done by adding water and blending to a smooth paste. Apply putty directly on primed wall using putty knife. Deep dents and pores should not be filled at a time but in thin layers. Allow to dry overnight and rub the wall with suitable emery paper The loose powder on the surface is to be wiped off with cotton waste. Repeat the process for second coat if required.

• Packaging Size: 30kg
• Type: Powder
• Packaging Type: Bag
• Usage/Application: Indoor and Outdoor wall finishing
• Category: White cement based
• Shelf Life: 8 Months
• Storage Condition: Normal Temp
• Brand: Sika Chemicals
• Tensile Adhesion: More Than 0.80 N/mm2 at 28 days
• Bulk Density: 1.2-1.4kg/l

IRIS Paints Wall Putty has a variety of applications and can be used on concrete, rendered walls, hollow blocks, pre-cast walls, concrete ceilings, calcium silicate bricks,aerated light-weight blocks etc.. Areas of Application of IRIS PAINTS White Wallcare Putty: Ideal for finishing and decorating exterior and interior walls of all kinds. It's perfect for homes, offices, bungalows, out houses, farm houses, theatres, exhibition halls, flyover walls etc. Can be used on fresh and old-painted walls (after removing the existing paint and base coat) Here’s how to use IRIS PAINTS Wallcare Putty: Use White Cement Based Wall Putty on plastered surface before painting. If there are major undulations use IRIS White Cement Based Wall Putty to level the surface. Usually, a 1.5 mm thickness coat of this product will remove the undulations. Ensure that surface plastered or made with cementitious material. Apply first coat of Iris Wall Putty (1.5 mm thickness) using a blade / spatula on the wall. putty substrate to make the surface smooth and provide a protective undercoat for expensive paints. It also brings out the true tone of any shade/colour of paint.

Anchor Surface White Primer, Mix Gold, Bronze, Industrial Paints

• Packaging Size: 4 Litre
• Packaging Type: Bucket
• Color: Red
• Finish: Smooth Wall Finish
• Application: Exterior Wall
• Brand: Nippon Paint
• Form Of Paint: Liquid
• Paint Base Type: Water Based Paint
• Drying Time: 30 min
• Shelf Life: 3 Year

• Packaging Size: 20 Litre
• Finish: Smooth Sheen
• Packaging Type: Bucket
• Country of Origin: Made in India
• Brand: Nippon Paint
• Usage/Application: Exterior
• Shelf Life: 5 Year
• Dry Time: 30 min
• Gloss Level: 60 Degree Head
• Clean Up Solvent: Clean, Potable Water
• Stability Of Diluted Paint: 24 hours
• Features: Colour-lock technology, Low VOC, Environment-friendly and healthy paint, Water Resistance, 5 Year Protection.

• Other Names: Glow in Dark Paint
• Place of Origin: Tamil Nadu, India
• State: Liquid Coating
• Brand Name: Flash

Can be painted on Cloth,Banner,Metal, Wood, Plaster of Paris, Concrete, Brick, paper, Wall, Terracota. Intense Illumination. Facilitate prominent display. Water Soluble. Water Proof once dryed.   Features:    HIGH QUALITY       COST EFFECTIVE      EXTREMELY USED

SKMP manufactures aluminium paste and air atomised aluminium powder in grades as required by the customers.

furniture paints, Varnishes, Primers, Royal Gold

Wood Primer, Waterproofing Compound, MOISTURE ABSORBING PRIMER

aluminium pastes, aluminium powders, ferrous metal powders

We provide a wide range of Non leafing Aluminium paste

distempers paints, Asian Paints, paint rollers, Paint Brushes

paint primers, paint emulsions