Industrial Paint Dealers in Simmakkal, Madurai

• Area of Application: Interior Wall Masonry, Exterior Wall Masonry.
• Physical State: Powder
• Method Of Application: Apply with putty knife
• Drying Time: Touch Dry - 30 Minutes, Hard Dry - 4 to 5 Hours
• Shades Offered: White
• Packing: Woven Bags - 1Kg, 5Kg, 20Kg, 40Kg

White Cement Based Wall Putty Iris Paints White Cement Based Wall Putty encompasses a superior formulation, based on white cement. It is water based and specially designed for leveling and smoothening the undulations on interior walls and exterior walls. It provides a smooth surface for paint application.It is available in powder form. Directions for Use Take required quantity of Iris Wall Putty in a pan. 35-40% water by volume is required to prepare paste of good consistency. Mix half of required water quantity into it. Knead/Mix the Putty & wait for few minutes. Mix remaining quantity of water to get desired consistency. Mix vigorously for 5-10 minutes for making a lump-free and uniform paste. Mix the product in such quantities that it should be used within 2 hours of preparation. Mixing may be done manually or by using a suitable electric mixer. Clean the surface thoroughly by sanding with suitable emery paper to free from dust, dirt etc., Ensure that surface plastered or made with cementitious material The surface should be moderately rough and in just-wet condition. Apply first coat of Iris Wall Putty (1.5 mm thickness) using a blade / spatula on the wall. Apply second coat of Iris Wall Putty (1.0 mm thickness) preferably after 4 hours in summers and after 12 hours in winters. Second coat shall be applied in horizontal manner to even out application marks of first coat, if any. Allow complete drying overnight and then use a fine emery paper to remove application marks, if any.

Iris Paints Acrylic Wall Putty encompasses a superior formulation, based on acrylic resin. It is water based and specially designed for leveling and smoothening the undulations on interior walls, wooden surfaces and metal surfaces. It provides a smooth surface for paint application. Thinning, if required can be done by adding water and blending to a smooth paste. It dries and hardens on air - drying. Technical Data Physical State : Smooth Paste Thinner : Water, If required Method Of Application : Apply with putty knife Drying Time : Touch Dry - 20 Minutes, Hard Dry - 4 to 5 Hours Shades Offered : White Packing : Plastic Pile - 1Kg, 5 Kg & 20 Kg Directions for Use Clean the surface thoroughly by sanding with suitable emery paper to free from dust, dirt etc., Wipe off the surface with a cloth or cotton waste. Thinning of putty, if required can be done by adding water and blending to a smooth paste. Apply putty directly on primed wall using putty knife. Deep dents and pores should not be filled at a time but in thin layers. Allow to dry overnight and rub the wall with suitable emery paper The loose powder on the surface is to be wiped off with cotton waste. Repeat the process for second coat if required.

• Finish: Matt
• Packaging Size: 1 Litre
• Packaging Type: Can
• Coats: 2
• Coverage Area Range: 55-60 Sq.ft/L
• Series: Ace
• Sheen Level Range: 3 - 12 At 60 Degree GH
• Shelf Life: 24 Months
• Form Of Paint: Liquid
• Brand: Asian Paints
• Stability Of Thinned Paint: To Be Used Within 24 Hours
• Drying Time: Surface Dry Time 30 Min
• Asian Paints Colour: White

Nail Varnish, Lip Gloss, Lipsticks, permanent eyeliner, Lotion

• Packaging Size: 1 and 5 Litre Packs
• Color: Green
• Brand: FOSROC
• Form: Liquid
• Primer Base Type: Epoxy
• Pot Life: 6 Months

glass paint, Semi Husk Coconut, Printed Packaging Box, Edible Oil

Oil Colors, polymer colors, acid colors, direct colors

Elite-Glory Finial-Teak Color, Copper Texture Elegant Finial

sketch color, file, Sketch Pen, School Stationery, pencil cases, Pencil

Oil Colors, Industrial Acids, Food Colors, acid colors, pigment colors

Paint

Paints, Paint Products, self adhesive, Varnishes, Building Materials

Paint, stainless steel handle door