Sprinkler Irrigation System Dealers in Madurai

• Material: HDPE
• Thickness: 1-5mm
• Color: Black
• Application: Agriculture
• Pressure: High Pressure
• Length: 3-10 meter

Applications For vegetables and open field crops, open field nurseries, crop germination, cooling fruit orchards and roof dust cleaning. Features and Benefits: Unprecedented level of distribution uniformity: maximum water use  and distribution efficiency due to the unique arm that offers outstandingly high uniformities.  Respective to its flow rate and placement spacing, the sprinkler's distribution uniformity is of the highest in the market. Can be installed on solid sets or in removable field stands. Made of UV-protected materials, durable to all climate conditions and nutrients injected in agricultural applications. Specifications: 5 different nominal flow rates: 510, 580, 680, 810, 940 l/h. Nominal flow rates at 2.5 bar pressure. Recommended working pressure: 2.0 to 3.0 bar (at the sprinkler head). Recommended filtration: 400 micron / 40 mesh. Filtration method to be selected based on the kind and concentration of the dirt particles contained in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pretreatment will be applied according to Netafim™ expert team's instructions. Water trajectory: 24 degrees Inlet connector: 1/2" male threaded. Code coloured nozzles for easy identification.

Sprinkler is thermo-sensitive quarzoid liquid glassbulb burst actuated type and be standard products from an established firm of repute and standing and approved by an appropriate authority for fire fighting duty.   It should be imported only. All sprinklers is brass castings polished / chrome OR white (polyester) unless stated otherwise and rated for 12.0 KG/CM2 WG and factory tested for 34.0 KG/CM2.  Sprinklers is pendant OR side wall type as specified and shown on drawings.  All sprinklers shall be provided with an adjustable OR Rosettes escutcheons finished same as the sprinkler head. Temp. classification of sprinklers in each space shall be as shown on the drawings.  Spinklers shall be selected for the coverage shown on the drawings and ordinarily be 15 MM.  Wherever the specified sprinkler is not adequate.  The tenderes may offer appropriate size required.  Tenderers are free to suggest alternatively other suitable sprinklers with its justification.

Drip Irrigation Systems, pvc sprinkler pipe

agri cultural sprinkler system, agri cultural rotavator

agricultural irrigation pipe, PVC Pipe Manufacturers, borewell pipes

sprinkler irrigation systems, AUTOMATION SYSTEMS, Drip Irrigation Systems