Vanavil Papers Simmakkal, Madurai, Tamil Nadu

White Cement Based Wall Putty Iris Paints White Cement Based Wall Putty encompasses a superior formulation, based on white cement. It is water based and specially designed for leveling and smoothening the undulations on interior walls and exterior walls. It provides a smooth surface for paint application.It is available in powder form. Directions for Use Take required quantity of Iris Wall Putty in a pan. 35-40% water by volume is required to prepare paste of good consistency. Mix half of required water quantity into it. Knead/Mix the Putty & wait for few minutes. Mix remaining quantity of water to get desired consistency. Mix vigorously for 5-10 minutes for making a lump-free and uniform paste. Mix the product in such quantities that it should be used within 2 hours of preparation. Mixing may be done manually or by using a suitable electric mixer. Clean the surface thoroughly by sanding with suitable emery paper to free from dust, dirt etc., Ensure that surface plastered or made with cementitious material The surface should be moderately rough and in just-wet condition. Apply first coat of Iris Wall Putty (1.5 mm thickness) using a blade / spatula on the wall. Apply second coat of Iris Wall Putty (1.0 mm thickness) preferably after 4 hours in summers and after 12 hours in winters. Second coat shall be applied in horizontal manner to even out application marks of first coat, if any. Allow complete drying overnight and then use a fine emery paper to remove application marks, if any.

IRIS Paints Wall Putty has a variety of applications and can be used on concrete, rendered walls, hollow blocks, pre-cast walls, concrete ceilings, calcium silicate bricks,aerated light-weight blocks etc.. Areas of Application of IRIS PAINTS White Wallcare Putty: Ideal for finishing and decorating exterior and interior walls of all kinds. It's perfect for homes, offices, bungalows, out houses, farm houses, theatres, exhibition halls, flyover walls etc. Can be used on fresh and old-painted walls (after removing the existing paint and base coat) Here’s how to use IRIS PAINTS Wallcare Putty: Use White Cement Based Wall Putty on plastered surface before painting. If there are major undulations use IRIS White Cement Based Wall Putty to level the surface. Usually, a 1.5 mm thickness coat of this product will remove the undulations. Ensure that surface plastered or made with cementitious material. Apply first coat of Iris Wall Putty (1.5 mm thickness) using a blade / spatula on the wall. putty substrate to make the surface smooth and provide a protective undercoat for expensive paints. It also brings out the true tone of any shade/colour of paint.

Acrylic Wall Putty Iris Paints Acrylic Wall Putty encompasses a superior formulation, based on acrylic resin. It is water based and specially designed for leveling and smoothening the undulations on interior walls, wooden surfaces and metal surfaces. It provides a smooth surface for paint application. Thinning, if required can be done by adding water and blending to a smooth paste. It dries and hardens on air - drying. Directions for Use Clean the surface thoroughly by sanding with suitable emery paper to free from dust, dirt etc., Wipe off the surface with a cloth or cotton waste. Thinning of putty, if required can be done by adding water and blending to a smooth paste. Apply putty directly on primed wall using putty knife. Deep dents and pores should not be filled at a time but in thin layers. Allow to dry overnight and rub the wall with suitable emery paper The loose powder on the surface is to be wiped off with cotton waste. Repeat the process for second coat if required.