Back Back
Bitumen Drum Decanter
2,000,000 Per Set
1 Set(s) (MOQ)
The company is the noted Manufacturer, Exporter & Supplier of durable Bitumen Drum Decanter. It is specifically designed to efficiently melt the bitumen drums prior to usage. The manufacturing of the decanter is done by using high-grade parts and components. We make available our Bitumen Drum Decanter in any required specifications and at reasonable price. More About Bitumen Drum Decanter : We have two models available with a melting rate of about 5.000 and 8.000 kg/hour. This equipment is designed to continuously melt bitumen contained in standard drums of 200 kg/each, so to enable a constant supply of bitumen. If needed, a suitable hot oil heater can be installed on the same skid to provide the required hot oil for the melting process and make the unit independent from external hot oil sources. Our Drum Decanters and Melters are primarily used with asphalt mixing plants in territories where bitumen is not available in bulk or regular supplies are unreliable and bitumen stored in drums is used as an alternative. Our decanters are designed for ease of operation and provide the most efficient system for ensuring a high throughput of drummed bitumen. Designed for use in association with bulk storage tanks the melted bitumen is automatically transferred from the decanter reservoir to the storage tank during the decanting process. Features : Melter Type : Continuous Drum Feeding Drum Loading : Hydraulically Operated Continuous Loaded– Pushed in to Heating Chamber Drum Arrangement : Drums are arranged in Three Rows and Pushed further on rails up to end till Bitumen Melts completely and Empty Drums exist from Rear Doors of Unit in Continuous mode Melting & Storage : in the Unit consists of Two Parts Upper: Melting Chamber Lower: Reservoir / Storage of Melt Bitumen-Asphalt Drum Heating : Drums are Heated in an enclosed well insulated chamber by circulating Hot Oil of 200 Degree Celsius Temperature through a bank of such coils and so gets heated in a few minutes only and drains into an underneath Reservoir Tank. Melt Bitumen in this Reservoir Tank is also heated to a desired Temp. By same type of heating coils. The Hot Bitumen from this tank is then pumped out by a positive displacement type gear pump with jacketed body. Insulated Unit : Entire body of unit is well insulated with 75 mm thick Glass wool Cladding by G.I. Sheet / Aluminium Sheet / S.S. Sheet (Optional)
Bitumen Drum Decanter
Get Price Quote
The company is the trusted Manufacturer & Supplier of robust Bitumen Drum Decanter. it made from standard steel and appreciated for its rigid and heavy structure. Bitumen Drum Melting Unit that we offer is widely used for taking bitumen out of the drums and heating up bitumen used by thermic oil heater. Our Bitumen Drum Decanter is effective than batch type drum melting system, which save energy and manpower. ARECON Bitumen Drum Melting Unit (Decanter) that we offer is especially designed for an easy operation. Salient Features : There are two parts in unit, upper part is calling Heating Chamber and lower part is storage tank for melt bitumen. Heating chamber and storage tank is fully insulated with 75mm Rockwool. Use of hot oil heating coils to indirectly heat up asphalt which can prevent asphalt quality from aging during heating. Seamless tubes are used for heating unit which are 2.9 mm thick and tested at 2000 psi. There is drum loading system by means of hydraulic cylinders and power pack to decrease man power and production coast also. Special Technical features : Bitumen in drum is heated by hot oil circulating through a numbers of seamless steel coils kept around drums in closed chamber and so bitumen quality never get affected. Also melting rate achieved in high by this process. Bitumen filled drums are loaded into this heating chamber by a hydraulic system, so labour requirement is minimum. Entire decanter unit is well insulated by 3" thich rock wool around and then cladding is done by G.I. and corrugated color steel sheets so, surface heat losses are minimum.This helps in fuel consumption cost. It also gives a good esthetic look. Bitumen in drums get melted fast due to heat generated by hot thermic oil circulation in tubes and drain down into a reservoir tank kept underneath, where it is heated further upto about 140deg C (pumping temp) by more heating coils kept in this tank. This hot bitumen can be easily pumped out by a high capacity jacketed body pump. A bitumen line filter protects pump from any damage due to undesired solid parts in bitumen. There are two PT-100 type temp sensors to measure correct temp in heating chamber and of melt bitumen in bottom reservoir tank. These temp are digitally displayed on control panel. A flot type level gauge gives you an idea of quantity of melt bitumen collected in reservoir. The entire system is pollution-free, easy to operate (user friendly ) & does not require a very skilled operator. The system is so designed by latest technology that it produces maximum tonnage of melt bitumen by minimum fuel, mimimum number of labours and thus saves in overall operating cost.
Best Deals from Decanters
Bitumen Drum Decanter
1,350,000 - 1,920,000 Per Piece
1 Piece (MOQ)
Bitumen Bag Decanter
2,800,000 - 3,700,000 Per Set
1 Set(s) (MOQ)
Bitumen Drum Decanter
Get Price Quote
Compact Hydraulically Pushing system of Bitumen Drum into insulated Heating Chamber designed for process of heating30 /40 (size 500 M.M. Dia. & 1000 M.M. Lg.) Bitumen Drum withextrafacility for un-loading Jumbo Bag. Decanter Unit with 6 Lac Kcal/HR capacity of high efficiency Thermic Heater with Bottom Storage Sump (21 M.T.) also facility for Bitumen Filter & Jacketed Bitumen Transfer Pump, fuel storage tank, fabricated inlet & outlet platform for drum. SALIENT FEATURES:- Production Of 7.5 T.P.H. For Model PHBDBD30 & Production Of 9.5 T.P.H. For Model PHBDBD40 Fuel Consumption Of 50 LTR./HR. For Model PHBDBD30 & 60 LTR./HR. For Model PHBDBD40 Supply Of High Efficiency Three Pass Latest Designed Thermic Heater High Accuracy Fully Automated Control System With Interlocks For Thermic Pump To Automatic Pressure Jet Burner, Low Level Termic Oil Indicator To Pressure Jet Automatic Burner, High Temperature Sensor Controller To Pressure Jet Automatic Burner & Also With Pressure Switch Controls To Automatic Pressure Jet Burner Imported Sufficient Capacity Automatic Pressure Jet Burner With Less Fuel Consumption & Lesser Pollution Emmission Rigid Steel Structure As Per Is Standard With Standard Quality Material Used With Periodic Inspection Carried Out During Manufacturing Process Fully Insulated With High Quality Insulated Material For Decanter Chamber To Minimise Heat Loss Standard Accessories Like Inlet & Out Let Insulated Pipe Line For Thermic Oil & Bitumen Filter Assembly With Outlet Pipeline To Feeding Tanker Decanter Chamber Connected With 6/8 Set Hydraulic System With Sufficient Capacity Powerpack Unit Without Any Leakages To Charge Drum In Time Into Decanter & Exits Drum Without Dis-Order Drum Sequence ( Jamming Like) To Other Manufacturer Self Centred Hydraulic Pushing System For Bitumen Drum To Feed In To Decanter Chamber All Assemblies Are Periodically Inspected & Tested Like Air Test/Hydro Test “Perfect” Decanter Unit Is Latest Compact Designed From Engineering Software To Operateeasily To Minimise Labour Cost, Breakdown, Less Fuel Consumption With Higher Production Compared To Any Other Manufacturer
