Metallic Pumps Dealers

Advantages : Centripetal self-priming pumps with turbine type impellers. Excellent for solvents tank farms. All parts made in investment casting to give superior hydraulic performance

• Country of Origin: India
• Max. Capacity: 80 m3/hr Max. Head : 60 mts
• Max. Working pressure: 16 Bar
• Max. Temperature: 200 C
• Max. Speed: 3000 rpm
• Material of Construction: CI, CS, SS, Alloy20, Hastelloy B & C, monel, CD4 etc.

Top centerline discharge, self-venting casing arranged for back pull-out. Fully confined gasket. Foot support under casing for maximum resistance of misalignment and distortion from pipe loads. ANSI-B-16.5 (Class 150) flanges standard. ANSI-B-16.5 (Class 300) optional for working pressures to 2550 kpa with 3mm corrosion allowance. For Maximum Corrosion erosion resistance casing is supplied without tapped opening but gauge and drain plug opening are provided when specified.   Impeller matched to the casing for high efficiency and low NPSH. Fully open, has partial shroud for maximum vane support without high thrust inherent in closed impellers. Stuffing box pressure reduced and the entrance of solids prevented by back pump-out vanes. Large smoothly contoured flow passages combine the best slurry and solid handling ability. The impeller is locked on the shaft with impeller lock-out and is sealed by PTFE gasket. State of the art casting methods provide the smoothest possible surfaces for the highest efficiency. All impeller is statically and dynamically balanced.   Application : High Temperature liquids up to 260 C. Low specific gravity hydrocarbons Highly Viscous & high freezing point fluids Corrosive acids Caustic Services Slurries Outdoor or Indoor installations

We offer a large assortment of technically advanced Metallic Chemical Process Pumps that is highly appreciated in the markets. Our range of Metallic Chemical Process Pumps includes Horizontal Pumps, Vertical Metallic Chemical Process Pumps, and Horizontal Self Priming Pumps. Today, we have carved a niche as one of the leading Chemical Process Pumps Exporters and Suppliers, based in India. Use of superior quality raw materials in the production assures high performance and low maintenance. Low energy consuming, our Metallic Chemical Process Pumps are cost effective. Features All The Wetted parts Are Made From Investment Castings Using Lost Wax process, Giving Excellent Surface Finish, Sound Castings, Giving Minimum Resistance to Flow Resulting in better Efficiencies. Maximum Interchangeability, Gives Minimum Spare parts Inventory. Greater Quality Control and Accuracy in Production Of Every pump With the Modern Machining Operations. Back Pull – Out Design, permits Quick Inspection or Repairs Of Rotating Elements Without Disturbing Electrical and Piping Connections Resulting in Minimum Down – Time Hydraulic Performance Maintained by Simple External Axial Adjustment Of Impeller Wear. Exclusive Balanced Thrust. Standard Dimensions , Cut Layout design Cost. Standard Foundation Save Installation and Drawing Time, Talent and Money.

• Material: Metal
• Color: Golden
• Dimensions: 2.5 x 2.5 x 5 cm
•  :  

Whether you just bought a new house, or want to renovate your old one, or visiting to somebody’s, some special gifts like showpieces are always best suited to any house! Showpieces are of a huge variety, covering from anything new to the oldest valuable antiques. Showpieces have the reflection of cultural and art and it represents your intellect. Not only that, but they also add bright colours to your house and beautifies the aura! Craftkriti brings you a great collection of such Showpieces. The bright colour and fused culture of traditional beauty and style is reflected in them.  We bring you a beautiful hand pump which is mobile as its size is 2.5×2.5×5 and could add beauty to your study table, dining table, office table, drawing room, study room or any table and room. It is made of metal and is golden in colour. It is purely handcrafted with the guarantee of lasting long. Buy this only on Craftkriti with best deals on price!

• Features: Durable, High quality, Reasonable rates

• Country of Origin: India
• Type: Vertical
• Certification: CE Certified
• Application: Industrial
• Driven Type: Electric
• Warranty: 1 Year
• Brand Name: Aeron
• Phase: Single & Three Phase

 Features : All the Wetted Parts are made from Investment Castings giving excellent Surface Finish, Sound casting, Better efficiency. Maximum interchangeability therefore minimum spare parts inventory required to be maintained. Back pull out design permits quick inspection, repairs of rotary assembly without disturbing pipe line and motor connections. Hydraulic performance maintained by simple external axial adjustment of impeller wear. Exclusive balanced thrust. Standard dimensions cut layout cost. Fully Open Impeller for various fluid transfer ranging from clear to suspended Solids. Salient Features : Pump Available in SS 316, SS 316L, Cast Iron, Cast Steel Investment Casting. Arrangement for Cooling Seal or Packing at elevated temperature. Removable SS Shaft Sleeve Simplifies Maintenance. Maximum Sealing Flexibility- Inside or Outside Seal & Single or Double Seal. Applications : CHEMICAL : Caustic Transfer, Hot Water, Cold Water, Acid Unloading, Monomer & Polymer Transfer, Molten Sulphur and Urea, Liquid Ammonia, Liquid Nitrogen. PETROCHEMICAL : Aromatics, Low Specific gravity Hydrocarbons, Gas Oil. PULP & PAPER : Digester make up-green and white Liquor and black liquor recovery, Coating Slurries, clay, Titanium Dioxide and Alum Transfer. STEEL & MILL INDUSTRY : Waste Acid Recovery, Scrubber Service, Pickle Liquor Circulation. GENERAL : Food, Pharmaceutical, Pollution Control, condensate Return, Filter Feed DM Water, Etc.

• Motor Horse Power: 15-25 HP
• Motor Phase: Three Phase
• Material: Cast Iron
• Power Source: Electric
• Voltage: 180-240 V
• Features: Rust Resistance
• Speed: 3000 rpm

• Size: 2 INCH
• Type: AODD
• Material: Aluminium
• Application: Chemical

A variety of elastomer options, including teflon® ptfe, are available to meet abrasion, temperature and chemical-compatibility concerns. The advanced series metal pumps are offered in die-cast aluminum, stainless steel and alloy c. A variety of options, such as ansi and din flanges, nptbspt threads, and specialized air distribution systems (ads), are available to meet your specific application requirements.

2 tone lotion pump

We are instrumental in offering superior quality Metallic Pump. Our Metallic Pumps are known for their powerful performance and are very easy to maintain. These Metallic Pumps are in accordance with set industrial standards and are properly tested by the experts to yield better and flawless performance. Our Metallic Pump is available in various types to suit different requirements of the clients. Types Available Portable metallic pumpsElectric metallic pumpsMotorized metallic pumpsPressure metallic pumps Features And Benefits All the wetted parts are made from investment castings giving excellent surface finish, sound casting, and better efficiencyMaximum interchangeability therefore minimum spare parts inventory required to be maintainedBack pull out design permits quick inspection, repairs of rotary assembly without disturbing pipe line and motor connectionsHydraulic performance maintained by simple external axial adjustment of impeller wearExclusive balanced thrustStandard dimensions cuts layout costStandard foundations save installation and drawing time, talent and moneyFully open impeller for various fluid transfers ranging from clear to suspended solids Applications Chemical : Caustic transfer, acid unloading, monomer and polymer transfer, molten sulphur and urea, liquid ammonia liquid nitrogen.Petrochemical : Aromatics, low specific gravity hydrocarbons, gas oilPulp and paper : Digester make up-green and white liquor and black liquor recovery, coating slurries, clay, Titanium dioxide and Alum transferSteel and Mill Industry : Waste acid recovery, Scrubber service, Pickle, Liquor CirculationGeneral : Textile, food, pharmaceutical and pollution control, chilled water, condensate return, acid recovery, stack scrubbers, filter feed dm water plant

We manufacture and supply a wide assortment of Metal Hand Water Pump. It is manufactured using high-grade metals in compliance with the standards of the industry. Our Metal Hand Water Pump is appreciated for its robust construction, high strength, easy installation, smooth operation, low maintenance, and long lasting life. Furthermore, Metal Hand Water Pump is highly resistant to corrosion and chemicals.

• Type: Centrifugal Pumps
• Certification: CE Certified
• Weight: 100-200kg, 200-300kg, 300-400kg
• Color: Green
• Power: 1-3kw, 220V, 3-6kw
• Driven Type: Electric
• Warranty: 1year
• Application: Cryogenic, Liquid End Fluid, Sewage, Submersible
• Fuel: Magnetic
• Application: Oil, Water

The company is a well known Manufacturer and Exporter Metallic Magnetic Drive Centrifugal Pumps in national and international markets.

We offer Metal Pump.

• Type: Automatic
• Weight: 50-100kg
• Voltage: 220V
• Power: 1-3kw
• Warranty: 1 Year
• Pump Power: 5Hp
• Pump RPM: 1400, 2800

• Pressure: Up to 6 kg / cm2
• Application: Effluent Treatment, Filter Press For Dyes And Chemical, Water Treatment Plants, Scrubbing Corrosive, Food processing, Drugs And Pharmaceuticals, Fertilizer Plants, Pickling Plants, Perfumeries.
• Brand: Gipfel Engineering
• Capacity: Up to 100 m3 / hr
• Temperature: Up to +200 Deg C
• Hardware MOC: CI, WCB, S.S. 304, S.S. 316, S.S. 904L, Hastelloy-C, Alloy-20, Titanium
• Features: Durability, Low maintenance, Flawless performance.

Non Metallic pumps are made up of matreial like Polyropylene, PPH,PVDF,PFA. these are corrosion resistant pumps and mostiy used in chemical industries,Dyes & Inermediates industries.

Air-powered, single diaphragm high pressure metallic pumps deliver discharge pressure...Air-powered, single diaphragm high pressure metallic pumps deliver discharge pressure twice the inlet pressure, up to 250 PSI (17 BAR). Designed for filter press feed and applications requiring higher discharge pressures. Available in Aluminum, Cast Iron and Stainless Steel with various elastomer options.

We have hired team of professionals who make sure that the material, required for manufacturing products, is of high quality standards and sourced from the trusted places only. Our payment terms and conditions and easily comprehensible and our methods are practical. We do not impose hidden charges and ensure business is carried out ethically.   Details : Max Head - Up to 50 MWC Max Capacity - 100M3 / hr. Design Features metallic pumps : Back Pull - Out Design Partially Open Impeller

• Brand Name: seal proof
• Color: nil
• Country of Origin: mumbai
• Model Number: SCP 30
• Style: centrifugal style
• Gender: nil
• Season: nil
• Upper Material: SS316
• Lining Material: SS316
• Insole Material: SS316
• Outsole Material: SS316

C.R.I. Pumps market presence is further established with the launch of yet another powerful range of pumps – ECH Series. With a host of positive and impressive features, ECH series augments the extensive range of C.R.I. Pumps. Designed to meet high pumping requirements in terms of performance and efficiency , this range of Hard Metal Slurry pumps offer 11 different sizes of pumps that are customized to suit the specific applications of the customer. High quality, better efficiency, heavy duty, corrosive and non-corrosive liquors, suspended solids, effluents, vertical and horizontal configuration and prompt pre & post sales services are some of the key features that enhance the utility of ECH series pumps. The assurance of C.R.I. Pumps is reinforced by the commitment delivered through the performance of its new range – ECH Series that stands for performance beyond the limits of technology. The unprecedented level of engineering perfection is designed to meet the burgeoning demands across the world.Services All Abrasive Slurries & Sludge Abrasive Chemical & Process Liquors Hard Solids Entrained Liquors Sand Filter Recovery Beach(Sand)Recovery/Dispersal Aggregate & Mineral Slurries Mineral & Ore Processing Cyclone Feed & Under-flow Tailings Disposal Lime & Clay Slurries Classifier Under-flow Dewatering, Wash down & Sluicing High Density Slurries & Sludge Highly Abrasive Solids in Suspension Coal Preparation Coal & Ash Slurries Metal Waste Separation/Recovery Performance Conditions Capacities to 3200 m3/h Heads to 95 m Temperatures to 232o C Pressures to 1000 kPa Design Features Fully Closed Impeller External Impeller Adjustment Optional Discharge Nozzle Positions Renewable Wear Parts Back Pull-Out Various Gland Sealing options; Packing, Mechanical Seals, Expellers. Heavy Duty Construction Maximum Parts Interchangeability Bearing Condition Monitoring External Impeller Adjustment Impeller to suction wear plate clearance can easily be reset by external adjustment in order to maintain hydraulic performance. This delivers long time energy savings, while keeping downtime to a minimum. With the application of an adjusting nut/jack-screw mechanism at the bearing cartridge area, axial movement of the impeller can be made upto 5 mm, thereby optimizing the above mentioned impeller to suction wear plate clearance and maintaining pump performance and maximising impeller wear life.   Heavy Duty Shaft & Bearings : Designed for continuous service under the most severe of operating conditions – with low deflection at maximum load – for longer seal and bearing life and optimum performance. 11 pump sizes with 3 frames fitted with spherical roller bearing at the drive end and single row angularcontact ball bearing at the pump end.   Renewable Wear Parts : Lower maintenance costs achieved due to replaceable critical wear parts such as the suction and stuffing box cover wear plates, impeller, and shaft sleeve

• Power: Electric
• Material: Metal
• Features: Nominal prices,Precisely designs,Accurate dimension
• Frequency (Hertz): 50
• Min Suction Capacity: 50 m3/hr
• Max Suction capacity: 1500 M3/hr
• Finish: Coated