Ruskin Titus India Pvt. Manesar, Haryana

Titus brings both accuracy and flexibility to the variable air volume (VAV) market with T3SQ VAV diffusers. The T3SQ combines the functions of a VAV terminal and a high performance diffuser in one. The T3SQ modulates the air volume delivered to a zone to accurately control cooling and heating conditions. The unique variable geometry design results in maximum air distribution effectiveness at any air flow, for superior comfort conditions. The T3SQ is also a GreenSpec Listed product and can contribute toward achieving LEED credits. VAV Diffuser Titus brings both accuracy and flexibility to the variable air volume (VAV) market with T3SQ VAV diffusers. The T3SQ combines the functions of a VAV terminal and a high performance diffuser in one. The T3SQ modulates the air volume delivered to a zone to accurately control cooling and heating conditions. The unique variable geometry design results in maximum air distribution effectiveness at any air flow, for superior comfort conditions. The T3SQ is also a GreenSpec Listed product and can contribute toward achieving LEED credits.  

Titus brings both accuracy and flexibility to the variable air volume (VAV) market with T3SQ VAV diffusers. The T3SQ combines the functions of a VAV terminal and a high performance diffuser in one. The T3SQ modulates the air volume delivered to a zone to accurately control cooling and heating conditions. The unique variable geometry design results in maximum air distribution effectiveness at any air flow, for superior comfort conditions. The T3SQ is also a GreenSpec Listed product and can contribute toward achieving LEED credits.

UnderFloor Round Products are architecturally appealing diffusers and grommets that are designed for use in high induction raised floor applications. Titus models TAF-G, TAF-R, and TAF-R-FR are contructed of a high-impact polymer material that is designed to resist damage from foot traffic. The TAF-R diffuser is also a GreenSpec Listed product and is available in standard light gray or black. Additional colors may be specified to match any building's interior scheme.

The TAF-L Perimeter System was designed to address the challenges of handling perimeter loads in a modular system. It is comprised of a modular cooling plenum, the TAF-L-V, a linear diffuser return plenum, the TAF-L-R, and two heating plenums, the TAF-L-W and the TAF-L-E. All units are designed to be integrated with the CT-TAF-L multi-deflection linear bar diffuser. The CT frame drops into the perimeter slot and sits on top of the carpeting. It installs into the TAF-L plenums from the top surface and removal of the flooring is not required.

Square Ceiling Diffusers are designed and engineered to maximize performance. A variety of products are offered ranging from the round pattern TMS, the adjustable TMSA and the star pattern MCD.

The Spectrum diffuser offers a unique alternative for architectural building applications. The Spectrum's design includes a special arcuate face with center appliqué. The appliqué is available in nine standard colors, as well as custom color matches or company logo. The versatility of these different color schemes provides the architect with a multitude of design options to compliment and enhance a building’s décor.

Size : 5inch

Type : Air Diffusers

Material : Aluminum

Shape : Oval

Application : Exterior Decor

Color : Black

Titus’ 300/350 Series supply grilles define the standard for the industry. With high quality and competitive pricing these grilles form the back bone of a standard offering that will meet any application requirements.

Titus Single Duct terminals are the fundamental building blocks for a VAV system. Their primary function is to regulate airflow to a zone, in response to zone temperature requirements. Titus Dual Duct terminals vary the airflow individually between hot and cold inlets for highly accurate temperature control.

Round diffusers Supply, return & exhaust Manufactured in aluminium Finish: Powder Coated

Titus square and rectangular louvered diffusers have a flush face that provides an architecturally pleasing appearance when mounted in the ceiling. These versatile diffusers are available in 1, 2, 3 or 4-way fixed directional patterns which provide a long throw, star pattern.

The Titus OMNI is a steel plaque face diffuser that satisfies architectural and engineering criteria. Its strong, clean, unobtrusive lines harmonize with the ceiling system without sacrificing performance. The curvature of the OMNI backpan works with the formed edges of the face panel to deliver a uniform 360 degree horizontal air pattern, without excessive noise or pressure drop. It is an excellent selection for variable air volume systems.

The Titus linear slot ceiling diffusers are high performance, high quality diffusers designed for variable air volume systems. The unique “ice tong” deflector blades allow for both changes in air volume and direction from the face of the diffuser.

When performance and appearance is of prime importance, the CT linearbar grille is the logical choice. It is equally suitable as a one piece individualgrille or as a continuous linear grille. Having a low noise level and uniformairflow,

When both appearance and performance are of prime importance in an air distribution system, Titus linear bar diffusers are a logical choice. Designed for both heating and cooling applications, supply as well as return.

Range : 6" to 18" Dia. Un-insulated & Insulated Black polyster core and metallised polyster jacket Metallised polyster core jacket

Titus drum louvers are great for shopping malls, warehouses, sports arenas, factories and other large open areas where air must be thrown over a large distance

Steel double deflection supply grille, 3/4" blade spacing, front bladesparallel to long dimension

The circular constant volume regulator type CVR is a control element which works independently of the pressure without an external power supply. It can be regarded as a self-actuating duct damper, as it delivers a required volume of air regardless of changes in system pressure. In consequence, the controller overcomes the need for system balancing and ensures constant air flow in service.TheCVR incorporates an adjustment device that allows to modify manuallyon site the air-flow pre-adjusted at the factory. Control CVR regulator has an automatic mechanism, equipped with a spring and a shock absorber system for avoid oscillations. The inlet pressure balances the force of the spring and push the blade to a defined position that finally controls the set volume airflow. Construction The casing of the regulator is made from galvanized metal sheet, incorporates a rolling rubber ring seals in both ends, avoiding in such a way to have to spot or screw in a horizontal assemblies, includes plastic type ABS. Made of stainless steel AISI-304.CVR-IX regulator works properly within a range of flow rates 10% lower than the regulator in galvanized. The regulator is also available in stainless steel or with a PUR coating in all RAL colours, upon request it can be delivered with an acoustic and thermal insulation film (CVR-D).

Titus architectural diffusers are high performance products designed to provide a pleasing architectural appearance. These ceiling diffusers provide a tight horizontal pattern to the ceiling maximizing room air induction

Ruskin offers the most comprehensive line of Air Measuring Stations in the industry.  Our flexibility is unmatched. Q: I already have a damper installed; does Ruskin have an air measuring device that will send a signal to my BAS for damper control? A: The AMS Features a standard factory installed low pressure transducer that provides an output signal proportional to CFM.  It’s ideal for retrofit applications! Q: I need to measure and control the flow in a return air duct but the controls are not in my contract.  Does Ruskin have a product that incorporates an air measuring station with a damper without damper controls? A: Yes, Ruskin’s AMS050 provides a factory assembled air measuring station with an integrated class1 leakage rated damper.  The standard transducer provides a signal that a controls contractor can utilize to control a customer furnished damper actuator. Q: I need to measure and control outdoor air behind a louver.  Does Ruskin have a turnkey solution that can control to a setpoint from my BAS? A: Yes, the IAQ50X is a perfect match for this application since it can be installed 4 inches behind a Ruskin louver.  The factory commissioned and calibrated controls communicate with any BAS.