Industrial Heatless Air Dryer
80,000 Per
1 Piece (MOQ)
Heatless Refrigerated Air Dryer
15,000 Per Piece
1 Piece(s) (MOQ)
Best Deals from Heatless Air Dryer
Heatless Air Dryer
Get Price Quote
A Heatless Air Dryer consist of two towers, which, alternately cycle on drying and regeneration. Each tower is filled with a bed of adsorbent desiccant. When one tower is on drying cycle, the desiccant adsorbs moisture from the incoming wet air stream and the other tower is on a regenerating cycle, which, a small portion of the super dried air passing through the desiccant to pick up and remove the adsorbed moisture, which is then vented to atmosphere. The towers are alternated in such a manner so that Dry desiccant is always in contact with wet compressed air, resulting in a continuous supply of Dry Air downstream. The process is automatically reversed from one tower to another by a microprocessor based sequenced timer. Dryer must be protected against water and oil suspended in the form of drops or finely dispersed mist. If the risk for such condition exists, a high efficiency pre-filter must be installed before the dryer. In regular course a ceramic candle Pre-filter is installed prior to the dryer to take care of incoming dust, dirt and foreign particles. By default, a ceramic candle After-filter is installed after the dryer to take care of desiccant dust carry forward in the dry air. The Pearl make heatless dryer is capable of providing a -40°C or lower atmospheric dew point and features a non-lubricated 3-way pneumatic switching valve. The operation is fully automatic and continuous without attention. Features: Pressure equalization: ensures dry air supply is continuous and at constant pressure. Electronic Timer: Highly precise and fail-safe with excellent repeatability Low Dew Point: Constant atmospheric dew point of - 40°C or below. Instant dry air availability: Easy to install & operate, requiring very few, low-cost spares. Low Power Consumption: Approximately 50 Watts only. Equipped with Silencers: low noise level.
Heatless Air Dryer
50,000 Per Piece
1 Piece (MOQ)
0.0
Website
Heatless Air Dryer
30,000 - 3,000,000 Per Number
1 NO. (MOQ)
Heatless Air Dryer
Get Price Quote
1 Pieces (MOQ)
Heatless Air Dryer
25,000 - 80,000 Per Piece
1 Piece (MOQ)
Features Compact design Pre Filter and after filter are standard Counter flow drying and regeneration Low pressure drop Automatic Re-pressurization fixed purge orifice.
Kaeser Heatless Regenerative Desiccant Air Dryer
Get Price Quote
1 Piece (MOQ)
Heatless Air Dryer
50,000 Per Piece
1 Piece (MOQ)
DP Series Heatless Compressed Air Dryer
150,000 Per Piece
1 Piece (MOQ)
Air & Gas Dryer
Get Price Quote
Heatless Air Dryers Operating principleIn Heatless Dryers, two vessels filled with desiccant are provided, which cycle automatically, producing Dry air continuously. In these units, wet air enters the bottom of one vessel and passes upwards through the desiccant bed where the moisture is adsorbed. The dry air comes out from the top. A small portion of Dry air is passed downward through the desiccant bed in the second vessel, which is under re-generation. Moisture laden purge air is then vented out to atmosphere. The purge loss is around 7.5% of the total air flow. At preset interval, the vessels changeover automatically, and Dry air is available continuously, without any surges.Simple Design / Easy operationThis is the simplest type of Air Dryer with Activated Alumina / Molecular sieves drying agent. This design is virtually maintenance free, fully automatic, and requires no attention for years. Heatless type dryers do not require any heating for re-generation and therefore are very simple in design and maintenance free.Low Investment / Low operating cost Due to its inherent simple design, investment in this type of dryer is the cheapest and the payback on this investment is very quick. Low temperature operation reduces corrosion in towers and desiccant lasts longer. Power requirement is single phase 220 /110 volts,50 Hz , 60 watts only for solenoid valves operation.
heatless desiccant air dryer
40,000 Per Piece
1 Piece (MOQ)
Our desiccant dryers adsorb moisture from the air stream and onto a desiccant material in a reversible process. They produce low dew points (up to -70 degree Celsius). They are a good choice when processes require extremely dry air in industries like pharma, paint, biotech laboratories etc. Desiccants used: Activated Alumina, Activated Carbon and Molecular Sieves.
Heatless Air Dryer
Get Price Quote
Heat less air dryers are used instrumentation and process applications like CNC machines, spray painting, nitrogen generators, laboratories etc. Main Features are Dew point achieved - 40˚C. Compact design, can be mounted on wall. Low power consumption. Light weight, Aluminium construction, Rust free. Specially graded desiccants for optimum performance. Equipped with pre filter & internal post filter. Quality as per ISO 8573.1 class 3. Range from 5 CFM to 1000 CFM.
Heatless Dryer
Get Price Quote
Suitable for extensive industrial usage, our Heatless Dryers are of unmatched standards. We fabricate them using the latest CAD/ CAM technologies. Therefore, our entire range is structurally reliable, dimensionally accurate, excellently finished and durable. We provide Heatless Dryer in various designs and sizes to meet varied requirements of buyers. In addition, we offer customized solutions. Buyers can get Heatless Dryer from us anytime and expect on time delivery of consignments.
0.0
View Profile
heatless type air dryer
Get Price Quote
We are amongst the chief Heatless Adsorption Air Dryer Manufacturers, Importers and Suppliers based in India. Our Heatless Adsorption Air Dryer is based upon the natural phenomenon of �Desiccant�, which allows establishing equilibrium with the surroundings. In Heatless Adsorption Air Dryer, wet Air (fluid) is cycled automatically between two desiccant towers. One tower adsorbs the moisture from the wet fluid, while the other being regenerated. The wet fluid enters the first tower and it passes through the desiccant bed where the saturated moisture is absorbed. Afterwards, a small portion of the dried air at ambient temperature and pressure is passed through the desiccant bed in the second tower for regeneration. At present interval, the towers changeover automatically and the cycle continues giving out a regular supply of fantastic dry air, which have dew points up to (-) 70oC (Atm.)
0.0
View Profile
Heatless Air Dryer
Get Price Quote
Compressed Air Dryer And Heatless Air Dryer
Get Price Quote
Atmospheric Air is sucked by air Compressor which basically contains water vapour & dust. Besides, in lubricated type Air Compressors, oil is present in the air compression chamber, traces of which are present, in compressed air in Liquid / Vapour form, which condenses into a heavy gummy oil varnish. Condensed moisture together with dust and oil in compressed air leads to emulsion formation causing following troubles: Formation of rust & scale, clogging orificies, resulting in malfunctioning of tools, controls & instruments.Freezing in air lines causes malfunctions & damages to process Equipments. Increased resistance to flow. By corrosion of air or gas the instruments can give false reading disrupting product quality. Rust & scale contaminates products when compressed air is used in mixing and processing. Bubbling effect in spray painted / Powder coated items. Sluggish operation of pneumatic equipments. If the temperature of the compressed air is more then 40o C then it is necessaroy to provide AFTER COOLER which should ensure the outlet temperature of 400C. During this cooling process, some moisture condenses which is removed our from prefilter. If the Air compressor is non-lubricated type then there is no need of Activated Carbon Filter, but if the Air Compressor is lubricated type them Activated Carbon Filter before Compressed Air Dryer / heatless air dryer is must. The characteristic of Activated Carbon is to remove the oil vapour totally from the compressed air. This ensure the full life of the desiccant in Compressed Air Dryer / Heatless air dryer . The HEATLESS type Air Dryer is the simplest & Economical Air Dryer with Activated Alumina Molecular Sieves as the desiccant. The twin Absorbers of Air Dryer is filled with these desiccant and is assembled with 3-way, 2-way, control valves and interconnected pipings. The Air Dryer / instrument air dryer follows the Drying sequence of 10 minutes. Here one absorber of dessicant air dryer is under drying cycle for 5 minutes and simultaneously the other absorber of air dryer under goes for regeneration and equalization process for (4 + 1) 5 minutes respectively. The changeover of the absorber takes place with the help of sequence timer. The moistured air and regenerative air is drained out through the individual silencer of the absorbers provided at the bottom hence super Dry Air comes from the top of the Absorber & is taken to your process for your applications. During this cooling process, some moisture condenses which is removed from prefilter. Salient Features : Super Dry Air by low investment. 100% Oil & Moisture free air with Dew Point of (-) 40oC (
0.0
View Profile
Heatless Air Dryer
Get Price Quote
Silver Line Series Gold line Heatless dryer
0.0
View Profile
heatless type air dryer
Get Price Quote
Heatless air dryers or have several characteristics that could affect operating costs along with the operating of the related compressors, and thus can affect the overall efficiency of the complete compressed air system. These dryers are designed keeping in mind the best of the customer so that you can get most reliable dryers for the usage. Just a look at these dryers tells that these are simply the best and incomparable. Very low silhouette, valves and manifolds within the reach of the arm of the operator, readily available drain and fill ports and just a few differences apparent on the outside. Both internally as well as externally, each of the Heatless air dryers or desiccant type dryers model is the perfect blend of highly durable and technically advanced components and parts and innovative engineering techniques. This provides easy operation, hassle free maintenance and easy installation.
0.0
View Profile
Heatless Air Dryer
Get Price Quote
Product range : 10 to 1000 cfm Due point -40°C Low maintenance cost
0.0
View Profile
Post Free Ad
