R.C. Enterprises Mathura, Uttar Pradesh

This Coating is applied where we need long term protection for steel in severely corrosive environment .And It is recommended for primer coat not for top coat that’s why we known these type of product “Sacrificial Life Product”.   Features: Good Mechanical Strength. Reduce the Effect Of Corrosion. High tolerance for several type of climate. Improved cracked resistance. Self healing of micro cracks. Excellent Protection.

A two pack polyamide cured high build high performance epoxy Zinc Rich Primer with optimum loading of zinc dust for excellent cathodic protection of blast cleaned steel structures. This primer is compatible with a wide range of topcoats and it enhances protective property of a paint system to a great extent. This primer is widely used where a long-term protection is required in saline and corrosive environment.

It a alkyd based product that have high gloss, and bearing resistance .It gives the wood mirror like finish and is extremely durable .It as an effective way to protect and decorate the wood surfaces.Once the wood surface is prepared then we applied this wood finish.

Water based putty are commonly used in every where for preparing the wall holes and to give smooth surface .It is basically used in domestic construction and repair as sealant or filler. Acrylic water based putty is also used to fill cracks, holes of surface ,patching up imperfections on plastered walls and having more smooth than simple water based putty .

This thinner is use to thinning down the viscosity of stoving paints. We should apply stoving thinner in stoving type paints . Features & Application: Medium Drying Heat resistant. High efficiency. Excellent adhesion. Low Wear Resistant. Highly Inflammable. Consistency not is accurate. Use in decorative, industries and plants. Flow of Paints in proper manner. Used for Polish purpose also.

Here we talk about heat resistant polysiloxane coating which is basically made by silicone based . Features: Long term protection for steel hot tanks Hot Pipeline Smoke stacks and Other hot surfaces.

This product is use to remove the rust from the metal surface. It is mixed with water in given appropriate order and applies it. After apply of this product wait for 15 min minute , you can find that the applied surface will look like a white metal then clean by cloth or by air pressure apply the primer coat urgently .Because if we will not apply the primer coat with in a 2-3 hour then this applied surface will converted into the rust. Features & Application: Easy to apply. Fast method. User friendly. Highly effective. Premium quality. Non hazardous. Rust inhibitor. Water based product. Can be use on all type metals. Completely dissolve rust, lime stone and scale.

It is a composition of thermoplastic resin with plasticizer and having fast drying properties. Here we provide cold type road marking coating in yellow, white, black, orange and grey color.

Epoxy coatings are formed on the basis of customer requirement or the requirement for the end product. We have to mix catalyst with base and applied, epoxies component produce a hard, chemical and solvent resistant finish. Basically they are used on steel and concrete to give resistance to alkali, water and acids. 1st Coat :A two pack polyamide cured, epoxy anticorrosive primer containing Zinc phosphate pigment. The red version contains red oxide of iron apart from zinc phosphate. The primer gives excellent adhesion to steel. It is compatible with a wide range of topcoats and thus forms highly efficient protective schemes for corrosive, coastal and chemical environments. 2nd Coat : A two pack polyamide cured high build epoxy coating based on laminar micaceous iron oxide pigment. Designed for application on structural steel as an intermediate or finish coat exposed to aggressive coastal and industrial environment. The product acts as a tough barrier coat with excellent impermeability to moisture. The grey version contains Titanium dioxide pigment apart from MIO pigment. 3rd Coat : A two pack polyamide cured High Build epoxy coating specially formulated as a finish coat for the protection of steel and concrete surfaces exposed to humid, saline and chemical environment. This coating when overcoated by Polyurethane finish immensely upgrades the anticorrosive performance of the system with outstanding weathering resistance and colour retention.

it is a product which is used for adhesion the paint with surface .It is used in between the surface and paint for foundation having rough or mat type finish ,this rough finish is must because that paint will make good adhesion with primer .

A two pack high gloss polyurethane top coat with excellent protection properties in industrial and coastal corrosive environment. This coating has excellent toughness and very good resistance to splash and spillage of mild chemicals.

Polysiloxane coating is a one of the most protective and maintenance coating for extreme Ultraviolet , abrasion, chemicals and high temperature . The polysiloxane comes from polymer with silicone –oxygen back bone. This product gives much more resistant to ultraviolet rays then the carbon-carbon back bone of organic polymer.   Features: Good Chemical Resistant. Good Anti fungus Coating. Corrosion Resistant. Low VOC. Good Anti-Graffiti Properties. Excellent Gloss Retention. Excellent Work Against Ultra Violet Radiation:

This Coating is used for high resistance to extreme weather and high gloss also. It is best for outdoor where considerable amount of sunlight is present. Protect to ultraviolet rays. Good Gloss Good Mechanical Properties Application: Car bumpers, Car Name Plates, Garden Furnitures, Window Frames.

Basically this type of coating is made for prevent the corrosion under insulation. This coating is recommended for the temperature from -185 to 600 degree centigrade and suitable for insulated and non insulted surface. Features: Surface tolerant coating. Temperature resistant up to -185 to 650 degree centigrade. Corosion protection under insulation and non insulation part.

It is a quality of paint that provides a luxurious, durable, rich, silky finish to interior surface. It is a long lasting durabilility technology having high Tech formulation to gives excellent hiding and coverage enhancing the look of any interiors. Features : High Covering Capacity , Excellent look ,Excellent flow ,Low viscosity ,high fungus resistance ,use friendly,Superb Strain Resistance. Area of Application : Ceiling and Wall Plaster , Brick works ,interior side etc. Pack size : 20 liter , 10 liter ,4 liter.

A two pack low VOC high build mastic surface tolerant epoxy coating reinforced with chemically inert glass flake for application on manually cleaned steel surface for enhanced durability and corrosion Resistance of steel structures in all corrosive environment including splash zone areas of offshore Structures. This product can be applied over most of the tightly adhering aged coatings and concrete Surface. It is widely used as maintenance primer and self priming finish.

This is a type of coating which give a reliable fire protection for steel and cables .We provide different range of intumescent coating for more durable and long term protection for every type of specification. We provide this intumescent coating for 30 ,60 ,90 and 120 minute rating for passive fire protection. Fire protection coating is used in almost every sector of the industry like:- Offshore installation:Hydrocarbons and jet fire protection areas such as blast wall & structural steel ,piping and under deck .Application: Offshore terminals Floating oil and gas production and storage vessel. Fixed oil and Gas platforms Industrial Installation:Hydrocarbons, cellulosic and sometimes jet fire protection area like pipeline, vessels located on Application: Oil sand plant Refineries Petrochemical Plants. Nuclear Power Plant Chemical Plants. Fertilizer Plant. Building Instalxlation :Usually cellulosic ,but sometimes hydrocarbon fire protection for internal and external area.Application: Airports & Transportation place. Commercial building Shopping Malls. Stadium Bridges. Building.

It is a long lasting exterior paint based on high performance with silicone, additives, light fast pigments and siliceous extenders to provide a very durable life. It is an acrylic based product to forms a strong bond with the surface and to protect all kinds of climatic conditions as well as alkalinity of plaster. It retains its color and to protects the surface from algae, fungus, peeling and chalking for years. Features : Good weather resistance, Low Viscosity, Excellent fungus and algae resistance, Prevent moisture penetration, ultraviolet resistance. Area of Application : Concrete brick, Wall, Exterior side and RCC Work. Pack size : 20 liter , 10 liter ,4 liter.

1st Coat : A two pack phenolic amine cured high solid,high build epoxy primer with high level of anticorrosive zinc phosphate pigment loading for long term protection of steel in severely corrosive industrial and coastal environment.It is overcoatable with a wide range of intermediates and top coats and ideal for application for application in areas where higher thickness is required for achieving optimum performance. 2nd Coat : A two pack Amine-adduct cured high build phenolic epoxy tank lining specially formulated to provide maximum chemical resistance combined with very good temperature and wear resistance. The coating has excellent resistance to crude oil, refined and unleaded petroleum products, MTBE, ATF, caustic solution, selected range of aromatic/aliphatic solvents, most commonly stored chemical products and fresh/saline/hot water. It is recommended for use on structural steel, equipment and concrete substrate exposed to severe chemical environments.

A two pack polyamidoamine cured fortified epoxy super high build mastic surface tolerant coating designed for application on manually cleaned steel surface as well as concrete surface. The product can be applied over most of the tightly adhering aged coatings and recommended as maintenance primer with suitable top coats.

Epoxy based thinner play an important role in epoxy primer and epoxy coating .Epoxy coating is a fast drying so it is very difficult to used epoxy coating without this thinner. We should apply epoxy thinner in epoxy based coating. Features & Application: Quick Drying Wear Resistant. Highly Inflammable. Accurate consistency. Improved Leveling Properties. Use in industries and plants. Flow of Paints in proper manner. Use in Epoxy based primers and thinners. Longer Shelf life. Safe application.

Type : Epoxy Based Thinner

Material : Epoxy

Feature : Dry Cleaning, Eco-Friendly, Good Quality

State : Liquid

1St Type : It is a type of alkyd based enamel high build coating for direct application on metal surface, after the surface preparation .In this paint having rust inhibitive properties, well gloss and give good protection in one coat outstanding for long term flexibility. 2nd Type : It is a type of Polyurethane based paint high build coating and good environment protection for direct application on metal surface, after the surface preparation .In this paint having rust inhibitive properties, well gloss and give good protection in one coat outstanding for long term flexibility.

It is a fast drying enamel paint which is use in both decorative as well as industrial sector. This product is slightly differ from other enamel products which are known for their fast drying properties. Having good finishing, fast drying properties, more durable, long lasting finishing and Superior hiding etc.

Long term protection against corrosion, robust. Strong mechanical characteristics so that coating can be with stand with impact and constant abrasion of heavy, dense cargoes such as iron ores . Features: Maximize technical performance. Outstanding chemical resistance so that the widest possible range of active cargoes can be carried. Easy cleaning of the coating speeds up pre loading inspections.