Maheshwari Silver Alloys Pvt. Ltd. Rithani, Meerut, Uttar Pradesh

Details : For purpose alloy with excellent mechanical properties. The nickel improves Wetting on carbides. A less free flowing alloy giving a thicker braze joint, better able to accommodate higher stresses. The addition of managanese enchances wetting on difficult carbides containing titanium & tantalum which are difficult to wet under normal brazing conditions. For brazing tungsten carbides and substances which are difficult to wet. Is economical alloys with good wetting characteristics. Used extensively for carbide tip brazing. For tungsten carbide and stainless steels. Used For tungsten carbide and stainless steels. Economical alloy with good wetting characteristics used for brazing hard metals to steel mountings. Addition of nicket and manganese improves wettability on tungsten and molybdenum materials. Used For stainless steels & tungsten carbide. Uses for brazing tungsten carbide. It is also used with steel, cast iron and malleabile iron, nickel & nickel alloys. Nibro with 1% Silver to improve joint strength. Used for furnace brazing without usage of flux. Used to fill gaps upto 0.5 mm

Material : Carbide, Tungsten

Shape : Round

Thickness : 10-15mm

Certification : ISI Certified

Surface Finishing : Coated

Feature : Corrosion Proof, Excellent Quality, High Strength

Details : Use in higher brazing temperature applications, where precipitation -hardening heat treatment in brazing are combined A high, temperature free flowing filler metal, mainly used in brazing stainless steel, nickel based, cobalt based alloy or high temperature applications. Mainly used for brazing & braze welding of precision silver equipment or precision silver linings of chemical equipment. For Brazing of objects mode of silver alloys which are to be enameled afterwards. Used for joint -copper-Nickel & iron based alloy. Quickly flow into narrow joints Used for particularly for joining sterling silver. Good color match with sterling silver. Used for brazing of silver goods made of silver alloys. Used in application ware silver-white colour is advantageous in combination of colour Used for stainless steel for corrosion resistance for solt spray cholorine etc. for joining Electrical Components requiring high electrical conductivity and gives a close colour match of silver. Also used for brazing silver goods Used For joint ferrous non-ferrous and dismilar metal & alloys with closed clearness such as steel, copper, copper alloys nickel & nickel alloys. For brazing monel, nickel alloys & silver The alloys is particularly suited for the brazing of stainless steel elements. where the joints is expected to be exposed to humid condition. To minimize stress corrosion cracking or nickel based alloy at low brazing tem. used for food equipment where cadmium must be avoid. Is for use on any steel, copper & copper alloys, nickel and nickel alloys. Advantageous where valatilization is objectionable in furnace brazing. Atmosphere furnace brazing for high temperature applications like jet engines. A free flowing brazing filler for joining 300 series stainless steel. Used for food handling equipment, hospital utensils and tungsten carbide inserts in cutting tools. Especially for brazing in the electrical & food industry. The alloy that can be used on copper bra., nickel, silver, bronze & other ferrous metals. Low melting Temperature, High Intensity good plasticity, the joint can bear vibration load, widely used for brazing copper, copper alloy and steel etc Especially for brazing electric industries. Used for brazing of ferrous & non ferrous metal other applications similar toRAJAT1204/45. For free flowing alloys ferrous, non-ferrous and dissimilar metals with good fluidity specially used in refrigeration industry It is a cadmium free & zinc free brazing alloy particularly suited for vacuum brazing. A free flowing cadmium free filler metal used with ferrous and non ferrous base metals. Frequently Used for temperature of farous & non-farous Brazing Application The presen. of tin improves fluidity & welding. Used for brazing the assembly of copper tubes in the refrigeration industry and on containers in the food industry. gsnseaszszpoiocad vtrmtting and flow characteristics Moderate ductility limits joint Is free flowing alloys for ferrous, non-ferrous and dissimilar metals with good fluidity. Lower Silver & Economical, Used for brazing steel copper & brass An economical low silver filler metal used for ferrous metals, stainless steel, copper, brass except aluminum, used in mechanical and electrical industries, refrigeration, musical instruments. An economical filler metal suitable for tungsten carbide, stainless steel as steel. For sirnultaneous brazing and heat treating of steels. Used For torch brazing on carbon and stainless steel copper, nickel and its alloys, Used in boiler works for drawn components. For copper base alloys such as band instruments; or joint brazing/cyanide case hardening of steels.  Used when heat treatment follows brazing, as a lower melting alloys than copper, or in vacuum systems. Brazing Nichrome resistance elements, or simultaneous brazing and heat treatig of steels Used as a altemative to brass alloys in automated brazing operations, and for brazing of tungsten carbide tips to tools and saw blades. The small addition of silver enhances their flow characteristics.

Material : Metal

Thickness : 10-15mm

Certification : ISI Certified

Application : Fittings

Grade : BS, IBR, JIS

Surface Finishing : Polished

Feature : High Quality, High Tensile

Details : One of the lowest melting point. Silver Brazing alloys available. It has excellent flow characteristics. The highest joint strength can be obtained with this alloy. Has Better resistance to corrosion in chlorine, sulphur and steam environments. Lowest brazing temperature range of the BAg filler metals. It also flows more freely info narrow clearance capillary joints. Its narrow melting range is suitable for rapid or slow methods of heating. This has the shortest melting range of any silver brazing alloys. This alloy is regarded as the best brazing alloy by manual brazers. It is particularly recommende where a minium brazing temperature is desirable to preserve the properties of the parent metals. Ideal where joints has a close fit up and will produce neat joints with dptimum ductility and strength. These are normally considered to be general purpose alloys. They exhibit good all round characteristics of short melting range, good flow, joint penetration and fillet forming capability. Due to their good flow characteristics they are suitable for majority of application A free flowing general purpose brazing alloy. Its brooder melting range is helpful where clearances are wide or are not uniform. Unless heating is rapid, care must be taken that the lower melting constituents do not separate our by liquation. Similar to RAJAT 1203140 but more economical. RAJAT 1200125, 21, 20 Cd have good fillet forming properties with an ability to bridge wide gaps. Their wide melting range limit their applications. Due to their wide melting range they are somewhat more subject to liquation and may require more care during brazing. Therefore, They are not normally recommended for applications with slow heating rates. Economical alloy with wide melting range. Like above, preferred for application having short heating short heating cycles to avoid liquation. Ideal for bridging wider gaps where work pieces are insensitive to heat.

Material : Metal

Diameter : 60-70mm

Thickness : 10-15mm

Certification : ISI Certified

Application : Fittings

Grade : BS, IBR, IS

Feature : Corrosion Resistance, High Tensile

Material : Metal

Thickness : 9.5-10mm

Certification : ISI Certified

Application : Welding Purpose

Feature : Corrosion Resistance, High Performance, Tensile Strength

Details : Exceptional Fluidity. Self Fluxing on Copper. It has low meaning point with good flow. Used where narrow joint include uneven junctions, refrigeration industry, on parts such as cuplings. manifolds, brass distributors, capillary pipes. Has good mechanical characteristics of low temperature It is with law melting range where temperature is a factor. Fast flow. verty fluid of brazing temperature & well penetrate joints with small clearances. It is some as Rajat 105115 & economic. Used largely in the refrigeration and air conditioning Industry. It fills moderate gaps in poorly fit joints and has good flow. It has the ability to fill wide joint clearances of the lower & of its brazing range. At the high end of the brazing range, it is more fluid. Recommended for sanitary and refrigerating installations. Same as Rajat 110312 with lesser silver It is a law cost alloy with wide melting range and low fluidity. Used in sanitary refrigeration and air conditioning industry. It is the most economical and used where the joint clearance is wider. Flow is sluggish.

Material : Copper

Thickness : 0.75mm-1.15mm

Certification : ISI Certified

Application : Electrical Appliances, Increase Fluidity

Temper : H32, H38

Technics : Cold Drawn

Details : All purpose. low temperature flux for use in brazing both ferrous and non-ferrous metals and alloys using silver brazing filler metals. Begins to melt and dissolve oxides of 340'C. Fully molten at about 600'C and provides adequate protection upto 750-'C Excellent in hat rodding operation used to braze weld where the hat brazing rod is pluged into the dry powder. Easy cleanup in hot water. For application where a dry low volatile flux is required. Recommended for use in 650-815°C range. Excellent in hot rodding operations. Easy Cleanup. General purpose, law temperature flux which provides excellent and creamy smooth consistency. For brazing all ferrous and non-ferrous alloys. Beging to melt and dissolves oxides at 326G, fully malten at 600"C. It Provides excellent protection of parts upto 870°C. Easy cleanup with hot water. For brazing high chromium stainless steels. tungsten and chromium carbides, and molybdenum alloys. its temperature range is 600-9250C and it is useful in applications where local overheating may occur, as in fast induction heating. Boron Modified. For applications with long heating cycles as in furnace brazing. Also useful in induction operations, where tendency to overheat moy exist. Active range : 650-870°C Used where brazing temperatures go into the 870-1100°C range or for considerable length of time above 785oC

Material : Metal

Thickness : 10-15mm

Certification : ISI Certified

Application : Fittings

Grade : DIN, IBR, IS, JIS

Surface Finishing : Polished

Feature : Corrosion Resistance, High Quality, High Tensile

Details : Rajat SC-6 is for brass brazing steel, malleable cast iron, copper, copper alloy with melting temperatures grater than 9500C (Solidus) nickel, nickel alloys. For copper, cast and malleable iron brazing. Used mainly on steels, malleable cast iron, copper and copper alloys. Used on steels, copper alloys, nickel, nickel alloys & stainless steel where corrasion resistance is not impartment

Material : Brass

Thickness : 90-100mm

Certification : ISI Certified

Length : 200-300mm

Grade : BS, DIN, GB

Finishing : Polished

Dimension : 90-100mm

Feature : Corrosion Proof, Fine Finishing, Perfect Shape