Mukul Brothers Engineering Works Limited Partapur, Meerut, Uttar Pradesh

it consists of wheat wheel, spur pinion mounted on the end of the wheat wheel shaft. This is meshed with spur gear which is mounted on the end of the water wheel shaft. Water wheel is fitted with cups. These cups are fitted on to the water wheel by means of a nut and spring washer. These water wheels revolve in a water tank. The level of water is maintained in this tank by means of a float ball. The grain by its fall revolves the wheat wheel and its motion is imparted through the spur pinion and gear to the water wheel, the cups on the water wheel lifts up the water from the water tank and deposits into the semi-circular catach trough from where it flows into the inclined trough and out of the machine into the stream of grain. It will be clearly seen that the greater the quality of grain passing through the wheat wheel, the faster will it revolve and consequently more water will be lifted, the percentage of moisture addition to the grain thus remains constant. No power is required to drive these machines as the weight of grain falling on to paddles is sufficient to produce the motive power.

an ideal machine for pre-cleaning purpose machine is used to separate out fine and large size impurities. Available in various sizes (2 sieve, 3 sieve, 4 sieve,) with sieve cleaning brush.

All metal construction A common body Two oscillating collecting boxes A common driving shaft with eccentrics / vibro motors Two / three oscillating sieve boxes   Applications:   For purifying and grading semolina and middling in flourmills.  

Applications: The Pulverizer hammer Mill can be used to grind following materials: Light Minerals, Spices, Vegetables, Roots, Animal Feed, Cereals, Herbs, Coffee, Malt, Soya Beans, Coffee Seed, Dye stuff The Pulverizer is supplied as a self-contained unit. The main shaft is supported on ball bearings and carries the rotors disc, on which are pivoted the steel hammers. The main casing is of a special MS iron. The special alloy steel hammers are made reversible so that they can be turned round when the leading face is worn out. This type of construction provides a long lifetime of operation. Pulverizer is an economical machine for general all-purpose work. It can be used for fine grinding of soft, medium as well as hard materials. The basic grinding unit is built for continuous production depending on necessity. Its efficiency depends largely on mounting feed material discharge control, and removal of ground material.

increased sifting output. simple and thorough cleaning of sieves with the intermediary of flaps. easily exchangeable, short frames of best quality wood.     applications:   it is custom-designed and built for multi purpose sifting operations. It is used in all types of granular & floury stocks. Some of its applications are: wholemeal atta plant: it is suited for wholemeal atta plant as it uses only 10% of power and 15% of space required for two centrifugals or reel machines.  

The Roller mill is a basic machine in the modern flour milling process. It has been a key equipment ever since the introduction of the roller milling system. “MUKUL” Roller Mill is a modern grinding machine of strong construction. It provides long service and can be used for all systems, breaks, scratch, and reductions in flour and rye mills. It can be used for grinding of wheat, rye, barley, oats, maize, beans, peas and other grains. It can also be used for grinding of minerals of low and medium hardness. The rolls are dynamically balanced, and run exceptionally smooth in self-aligning roller bearings. The feed gates are suitably constructed to ensure uniform flow of different stock to the main rolls.

Application : Laboratories

The machine effectively removes outer husks and crease dirt by its intense scouring action, and will reduce in size and therefore remove through the sieve apertures. It also removes soil and loosens any adhering dirt from the outer layer of the wheat kernel.

intensive scourer with aspiration channel features:   all metal construction with large side inspection door. special dead-box type inlet arrangement rotable through 360 degree for ease of planning-in. two-section scouring drum - first half solid, second half perforated sheet metal. special wear hardened beater blades incline mounted on rotating shaft. aspiration connection point to ensure dust-free operation. easy access to all areas for maintenance and cleaning.   applications:   the machine effectively removes outer husks and crease dirt by its intense scouring action, and will reduce in size and therefore remove through the sieve apertures. It also removes soil and loosens any adhering dirt from the outer layer of the wheat kernel. sizes available - 5 ton & 10 ton per hour  

it is used for providing moisture in food processing industries. sizes available: 5 ton, 8 ton & 10 ton per hour..

  ‘MUKUL’ Chakki is used for grinding of wheat into Aata sizes available: 24" , 27" & 30"  

an ideal machine for de-hulling of wheat & other grain mostly used in whole meal atta plant and dal mill plant the processing effect of the machine can be adjusted from outside by means of slide control device.

The Roller mill is a basic machine in the modern flour milling process. It has been a key equipment ever since the introduction of the roller milling system. “MUKUL” Roller Mill is a modern grinding machine of strong construction. It provides long service and can be used for all systems, breaks, scratch, and reductions in flour and rye mills. It can be used for grinding of wheat, rye, barley, oats, maize, beans, peas and other grains. It can also be used for grinding of minerals of low and medium hardness. The rolls are dynamically balanced, and run exceptionally smooth in self-aligning roller bearings. The feed gates are suitably constructed to ensure uniform flow of different stock to the main rolls.

Features : Ease of maintenance.,Use of standardized components,Lower noise and vibrations

High Destoning efficiency. Performs two functions in single machine. Reduces power requirement. Makes four distinct separations. Eliminates water pollution in flour mills by discarding Washer Whizzer. Very little maintenance. Very cost effective. Applications: The machine combines two major functions. It concentrates impurities and separates stones and other heavy impurities from the grain. The machine has unique high separating efficiency because of its design. It divides the grain into two fractions - light and heavy before separating stones from the heavy fraction. sizes available - 2 ton, 5 ton & 10 ton per hour

The machine is used to classify and clean dry loose stock trough the action of a set of screens and air. It is recommended to be used together with an Air-Shifter.

Features : Effective cleaning and grading machine.,Low power consumption.

Classifier Separator with aspiration channel Features: Effective cleaning and grading machine. Low power consumption. Permanent attendance not necessary. Free-swinging sieves with unidirectional screen motion. Driven by means of Vibrators located in the centre of gravity of the machine. Applications: The machine is used to classify and clean dry loose stock trough the action of a set of screens and air. It is recommended to be used together with an Air-Shifter. sizes available: 5 ton & 10 ton per hour

Occupies little space, thus allowing freedom in selecting the most suitable and convenient location. Constant and uniform centrifugal action through the use of perforated sieve casing. Easily removable sieve casing. The beater rotor is also readily accessible. Applications: Bran Finisher removes the last trace of flour from bran, and produces a bran which is relatively free from starch.

Occupies little space, thus allowing freedom in selecting the most suitable and convenient location. Constant and uniform centrifugal action through the use of perforated sieve casing. Easily removable sieve casing. The beater rotor is also readily accessible.

Bran Cutter is used for grinding of bran into finer particles.

the aspirator-separator are used for cleaning of cereals in granaries mills, grain storage, seed processing plants, dal mills, malt house, maize plants, starch plants, flour mills, etc. The aspirator-separator cleans cereals from impurities such as stones, earth cleads, sand, straw, chaff, dust, wood seed, strings, wood strings, empty corns, etc.

Size : 2 ton, 4 ton & 8 ton per hour