Space Time and Research Pvt. Ltd. Meerut, Uttar Pradesh

We manufacture digital turbidity meter. It is an ideal meter & is a highly accurate instrument for testing of drinking water & sewage disposal water. Technical Features: Highly Stable & Accurate 3 ½ Digit LED Display 30mm flat bottom Test Tube 0 to 1000 NTU

Rated Power : 230V±10%, 50Hz AC

Features Control Conditions (As per ICH guidelines, in degrees): At 25 : RH = 60% At 30 : RH = 65% At 40 : RH = 75% Construction: Double walled with backside triple Insulation: 3” Thick PUF Insulation with humidity & reduced energy consumption for temperature stability Blower Motor: 1/12 HP, TEFC , F-class insulation, Single phase, 1440 RPM, 230 Volts Blower Motor: 1/12 HP, TEFC , F-class insulation, Single phase, 1440 RPM, 230 Volts Humidity System (water level arrangement): Steam injection system (Non condensing type) & reservoir tank with with indicator Cooling: An eco-friendly CFC free hermetically sealed Emerson Copeland compressor with R 134A for safeguarding and cooling of compressor system Additional Safety thermostat to cut-off dry heater supply in case temperature overshoots Float switch cuts off the wet heater supply in case of low water level in the boiler tank reaches critical level In-built over load protector for hermetically sealed compressor Audio & Visual alarm. Compressor ON delay timer (2 min.) to safe guard the compressor

Technic index: Display:240*64 graphic LCD. Test method: end point, double wavelength, Linear, Absorbance. Wavelengths: 450, 505, 546, 578,630nm. Absorbency range: 0～2.5Abs,Resolution:0.0001Abs,Stability:±0.005Abs. Linear tolerance : ≤2.0％. Cross contamination≤1.0％. FlowCell: stainless stell with quartz window,measuring volume 2ul,optical path 10mm. Temperature: 25,30,37±0.1℃,Temperature precision:±0.2℃. Interface:RS-232. Printer: Internal graphic thermal printer with character of low noise,high speed and long service life.External printer is also supported. Paper width: 57mm.

Mains cum Battery operated In-built Rechargeable Battery In-built Light Shutter Highly stable & accurate

A pH meter is an electronic instrument used for measuring the pH (acidity or alkalinity) of a liquid (though special probes are sometimes used to measure the pH of semi-solid substances). A typical pH meter consists of a special measuring probe (a glass electrode) connected to an electronic meter that measures and displays the pH reading. Easy user friendly portable pH meter Unique design for testing variety of samples Measures water, pastes, powders, solids, and rigid surfaces Flat sensor easy to clean Automatic calibration Perfect for lab, plant, or field use. Complete kit includes meter, sensor, batteries, ph 4 and 7 buffers, and a case

Standard Features: 12.1" Colour TFT Monitor, 5 Channel, Dual-Mode display. ST segment(dot) automatic analysis and ECG wave freezing with manual analysis. Graphical & tabular trends for upto 12/24/96 hours with zoom facility. Memory and view a list of up to 400 groups of parameters data. ECG waveform can be stored for 24 hours. (single lead) Simultaneous display oftrends/ECG (multi channel 3-7 Lead display option) Protection against interference from defibrillator, electrical cautery. It can be used along with cardiac pacemaker. Adult/infant/neonate measurement modes.

The modern microscope is an indispensable piece of apparatus in the laboratory and a theoretical knowledge of its working principles is essential. It is a precision instrument and its efficient use requires a degree of skill and some basic training. Time spent on the systematic setting-up of the microscope is vital, as the use of a poorly set-up microscope will result in fatigue, headaches and possible eye strain.We Provide Different types of Microscopes. Simple microscope Compound microscope: Bright field microscope Dark field microscope Phase contrast microscope Fluorescence microscopes Electron microscope: Transmission electron microscope Transmission electron microscope

double walled ss inner & outer. Outer body can be ms with pp  powder oating, microprocessor based membrane type controller, temp range ambient to 250 degree celsius. 2/3 perforated ss trays

Type : MICROPROCESSOR

Brand Name : SPACE TIME

Certification : CE & ISI

Application : LABORATORY

Voltage : 4 KWA

Condition : No Condition

Application : Hospital, Industrial & R&d Centres

Power Source : THREE PHASE

Warranty : One Year

After-Sales Service Provided : Yes

manufactured by cnc operated machine, 11 tank pretreatment with pp powder coated , abs panel highly advanced.

highly advanced, 16 chaneel data logger, high quality ss, isi marked all acessories, ce certified product, calibration certified by nabl acceridated lab.

A flame photometer is a device used in inorganic chemical analysis to determine the concentration of certain metal ions, among them sodium, potassium, lithium, andcalcium. In principle, it is a controlled flame test with the intensity of the flame colour quantified by photoelectric circuitry. The sample is introduced to the flame at a constant rate. Filters select which colours the photometer detects and exclude the influence of other ions. Before use, the device requires calibration with a series of standard solutions of the ion to be tested. Flame photometry is crude but cheap compared to flame emission spectroscopy, where the emitted light is analysed with a monochromator. Its status is similar to that of the colorimeter(which uses filters) compared to the spectrophotometer (which uses a monochromator). It also has the range of metals that could be analysed and the limit of detection are also considered.

highly accurate , ss body ineer & outer, microprocessor based controller, avilable in 150 litre, 200 litre , 250 litre & 450 litre..

Type : MICROPROCESSOR

Brand Name : SPACE TIME

Material : FULLY SS 304

Certification : CE & ISI

Color : SILVER , BLUE & CHERRY

Specialities : ADVANCED

We fabricate a broad range of digital UV-VIS spectrophotometer. Best suited for spectrophotometric analysis of any concentration, these instruments have a single beam, provide reliable performance, are flexible in nature to deliver precise results. Our engineers make these instruments using world class machines and equipment in accordance with the ISO standards. Features are as follows: Range 190 To 1000 nm Highly stable & accurate 4 position sample holder UP based wavelength selection 4 Digit LED display for wavelength The output is available on a 3 ½ digit red seven segment LED display in terms of %Transmission (%T), Absorbance (Abs.), and Concentration (Conc.) 3 ½ Digit LED display for data

Digital TDS Meter is extremely useful for fast and accurate determination of total dissolved solids in a liquid. The instrument is ideal for testing of natural water, drinking water, treated water, waste water, brine solution, sea water and soluble salts in liquids. Features: Highly Stable & Accurate Rugged, Reliable & easy to operate 3 ½ Digit LED Display Cell Constant Adjustable with indication display Technical Specifications:The wide assortment of TDS meter catered by us is highly appreciated by global clients for their accuracy and durability. Our designers are capable enough to manufacture precision engineered meters that are at par with international quality standards.

Accuracy : ±2%FS±1Digit

Resolution : 0.1 u ppm

Power : 230V ± 10?, 50Hz

Our gamut of digital dissolved oxygen Meter offered by us is of superior quality and is duly tested ay certain quality parameters. The raw material is sourced from reliable vendors and is carefully manufactured in compliance with international quality norms. Features: Reliable Accurate DO & temperature measurements in the laboratory Available with customized solution

Display : 31/2 Digital Bright Red LED

Leveraging on our high tech manufacturing facilities, we manufacture quality Digital Conductivity Meter. Available at reasonable p;rice and in various specifications, these instruments are widely used by construction industry, steel plants, ready mix concrete plants and cooling towers -chilling. Conductivity meters are offered to our clients in standard and customized specifications. Feature: Reliable and easy to operate 3 ½ Digit LED Display Cell Constant Adjustment Facility Automatic Temperature Compensation Facility

Accuracy : +1% FS +1 Digit

Weight : 2 kg. (Approx.)

Our diverse range of digital colony Counter offered by us is of premium quality and is fabricated using quality raw material. With the assistance of our designers and experts we are capable to offer customized solutions to our clients as per their specifications in stipulated time frame. Features: 110mm Dia Magnifying Glass Audible Confirmation of each count Uniform glare free illumination Auto Marker pen Wolffhuegel glass grid with focusing facility Instant results Traceability: automatic recording of Image and results, recountable anytime, data export to ExcelTM Chromogenic media: counts up to 7 colors on the same plate Inhibition zone analysis Adaptable (reads Spiral, spread and pour Petri dishes, Petrifilm, RIDA Count/ Sanita-kun, filtering membrane, Compact Dry, inhibition zones)

Dish Size : 110 mm

Weight : 4 Kg. (Approx.)

Power : 230V ± 10% AC, 50Hz, 40W

double walled construction, inner shells are made of ss 304 quality, outer body ms with pp powder coated,temp. Range 5 degree celsius to 65 degree celsius,isi marked compressor ,isi marked every parts

Brand Name : SPACE TIME

Application : LABORATORY

Classification : CLASS 1

Power Supply : 6KWA

Warranty : One Year

microprocessor based controller, highly accurate german made compressor, system operated result(optional), data logger, ce certified product.

Size : 425

Type : Auto

Brand Name : SPACE TIME

Material : SS & HIPS

Weight : 150 KG

Classification : CLASS 1

Voltage : 9 KWA

Application : BLOOD BANK , HOSPITAL , LABORATORY

Certificate : CE , ISI

provides the protection of operator from risk of biological agent.sterile work environment,negative pressure in the work chamber, hepa filter,hepa, u.v.v germicidal light,manometer,gas cock,front sliding door,.

Type : MICROPROCESSOR

Brand Name : SPACE TIME

Material : SS CHAMBER INNER & OUTER

comfortable position for the donor, arm rests having up & down moving facility, 4 castors are easily lockable.

We are offering a wide assortment of autoclaves in vertical sizes. These autoclaves are manufactured from quality materials thus providing maximum satisfaction to our clients. Some of the features of these autoclaves are: Double Walled inside made of thick stainless steel and outer body of heavy gauge mild steel attractively painted (STD Model)or interior and exterior made of stainless steel 304 (GMP Model). Lid is of SS die pressed and fitted to the body / container tank by means of wing nuts & bolts working for fly nut system. The lid is fitted with a pressure gauge, safety valve, steam release cock and extra safety valve. Max pressure 20 psi / Working Pressure 15 psi. Tested up to 40 psi. Foot Pedal Lifting Arrangement (Optional) Water Level Arrangement (Optional) Perforated SS Basket (Optional) Automatic Pressure Switch to out off supply at set pressure (Optional). Automatic Pressure Switch to out off supply at set pressure (Optional). Further, the technical specifications of these incubators are:

We are offering a wide assortment of autoclaves in various sizes and specifications. These autoclaves are manufactured from quality materials thus providing maximum satisfaction to our clients. These are known for their robust body, durability and long service life. Some of the features of these autoclaves are:We offer a wide range of autoclaves that are sterilize and are portable one. These autoclaves can work on gas or electricity. The container is made of aluminum or stainless steel. The Lid is fitted with pressure gauge & safety valve which is adjusted to blow off the steam at 12 psi maintaining constant pressure of 15 psi. Further, the technical specifications of these incubators are:

Auto Karl Fischer Titrimeter is a versatile, compact, rugged & easy to operate instrument to determine Moisture Contents in Liquids & Powders. The instrument comprises of two units i.e. Control Unit & Titration Unit. The Control Unit controls the complete automatic titration. We are catering auto Karl fisher titirimeter to our clients based globally. These are available at optimum prices with customized solutions as per clients’ specifications. Owing to the quality standards, these are highly demanded and are at par with international quality standards. Feature: Auto Titration Control Auto Zero Burette Adjustable Timer Visual & Audible Alarm

Power : 230V + 10% AC 50Hz

Weight : 5 kg. (Approx.)