Antique Designer Tiles Rafaleshwar, Morbi, Gujarat

Antique Wall Putty” is a water resistant white cement based putty ideal for use on concrete/mortar walls (Internal and External) and ceilings. It fills the fine pores of mortar/concrete walls and ceilings and provides a white, smooth and dry surface, essential for painting. “Antique Wall Putty” can be applied even on moist surface (Internal/External). “Antique Wall Putty” has more adhesive strength, durability and enhances the life of paints. “Antique Wall Putty” though white cement based, does not require water curing. Salient features of “Antique Wall Putty” • Being a cementitious material it has better adhesiveness and durability. • “Antique Wall Putty” can be applied on both interior and exterior surfaces. • “Antique Wall Putty” does not require any curing. • It is water resistant and can be applied on moist surface. It is recommended that two coats of Birla White cement wash be done before application of “Antique Wall Putty”. • “Antique Wall Putty” gives a smooth and glossy finish. • Any kind of paint or distemper can be applied on it. • No need to apply any kind of primer on it before application of paint/distemper. • It can be applied on used surface after proper preparation. • It prevents the growth of algae and fungi on walls. • It is in dry powder form and does not produce any kind of unpleasant smell at the time of application. Application Procedure Remove all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and clean water. The substrate should be clean, free from dust, grease and loose materials. Dry and absorbent surfaces should be moistened with sufficient quantity of clean water. Mix “Antique Wall Putty” with 30-35% clean water slowly to make paste. Continue the mixing for 10-15 minutes till a uniform paste is formed. After thoroughly mixing “Antique Wall Putty” apply the first coat on already moistened wall surface from bottom to upward direction uniformly with the help of putty blade. This would ensure less wastage and proper finish. After drying of first coat of putty just rub the surface gently with west sponge or rub the surface very gently with the putty blade in order to remove the loose particles. Allow the surface to dry for atleast 3 hours and then apply second coat of putty. Leave the surface to dry completely. After drying of second coat remove marks if any with the help of moist sponge or rub the surface very gently with the putty blade. Leave the surface to dry preferably for overnight. Always prepare a required quantity of putty and use it within 2-3 hrs. of mixing with water The total thickness of the coats should be limited to maximum 1.5mm. It is not essential to rub the surface done with “Antique Wall Putty”, however if you need to remove unevenness before applying any kind of paint/distemper, gently level the walls/ceiling surface with very fine water proof emery paper of not less that 500 number to get a glossy white surface. Precautions During Application Mixing of “Antique Wall Putty” is very important and hence extreme care is to be taken for proper and thorough mixing with hand or mechanical stirrer in order to get best results. “Antique Wall Putty” should be done over fully cured surface. It is recommended not to rub “Antique Wall Putty” strongly and harshly with rough emery paper. This breaks the film formed over “Antique Wall Putty”, which decreases the water repellency properties. The total thickness of the coat should be limited to maximum 1.5mm. In case of fresh concrete/mortar surface it is recommended that two coats of Birla White cement wash be done before application of “Antique Wall Putty”. Coverage The coverage area of “Antique Wall Putty” on smooth normal mortar wall is 20 to 25 Sq. Ft/Kg/mm in double coat. The coverage area, however, will depend upon the quality of the substrate. Note Generally the cause of efflorescence on the walls surface is the brick masonry, which is due to the quality of bricks, sand and water, If the effect of efflorescence on the brick masonry seems to be very high then proper care should be taken to control the efflorescence. The efflorescence problem on brick masonry if exists impairs the bonding of “Antique Wall Putty” as is with any other product. Packing “Antique Wall Putty” is available in 1Kg, 20Kg And 40Kg Packs.

antique tile grout silver is a fine powder consisting of portland cement, specially selected polymer, properly selected & graded fine fillers, additives and inorganic chemicals. It is used for grouting of tiles, stones, marble joints & edges because it has water repellency properties, excellent adhesion (high bonding strength), soft consistency, workability and seals joint permanently. It is non-shrinking, non-toxic and odourless grout used for sealing of swimming pool & water tank joints as well. areas of application antique tile grout silver is used for grouting of ceramic tiles, marbles, natural stones and edges. *specially formulated for wet or submerged grouting applications such as swimming pool, bathrooms, toilets, fountains and kitchen areas. *it can be used for external and internal areas. *it is used in residential and commercial areas. *application up to joint width of 2-4mm. *it is excellent for highly glazed tiles to give a smooth and watertight joints which when set will be both water and mould resistant. features & benefits *aesthetics – available in specify shades. *easy to use – easily to mix with water and forms soft consistency paste which is easy to fill the joints. *shrinkage & cracking – avoids cracks formation in the joints and also there is negligible shrinkage. *service temperature – specially formulated for temperature range of 5° – 120°c. * water resistant – excellent water-resistance making it beneficial for application in areas immersed under water. * durability & uv resistant – excellent uv resistance & durability enables the product use for exterior application. * high strength & abrasion resistant – high strength & abrasion resistance properties makes it suitable for grouting of toilets & bathrooms. method of application 1 surface preparation * surface must be cleaned and should be free from dirt, cured tile adhesive. Remove dust with wire brush & by air blower. * for exterior grouting application, wet the tiles prior to applying antique tile grout silver. 2 mixing * add the grout powder to the mixing water (w:p ratio – 1 : 2.5 by volume) and mix with slow speed drill (250-300 rpm) to a soft & smooth consistency paste. * if the grout mortar has become too stiff to work, it should be discarded and a new batch should be prepared. 3 application apply to the tile joints with squeegee, spatula or putty blade. After application flush the surface of tile using a hard rubber float, working diagonally across the grout joints to fill and compact the joints. All excess grout should be removed with the same rubber float without any delay. *lesser the quantity of grout left on the face of the tiles while application, the final cleaning will be easier. With antique tiles & grout cleaner – 225. *however, it is important to allow the grout to set in the joint and to let it acquire its initial set before any further cleaning. After the initial set of the grout, clean the tile surface with a pad of cheesecloth or towel dampened with minimum quantity of clean and cool water. Rub in a circular motion to further compact the grout. *the remaining surface grout on the tile can also be cleaned at this time. Scrubbing pad fastened to a float works very well to remove grout from the porous tiles. *rebuff the tile surface and grout within 1-2 hours to remove all weep water and grout residue from the surface, which helps to reduce the efflorescence and to control colour variation. 4 cleaning *polish the tiles when the job is complete with a clean dry cloth. Scrubbing the floor with hot water and soap water is the best. *due to polymer content, it is advisable to clean the surface immediately after the grouting. precautions & limitations *do not mix excess water. *antique tile grout silver cannot be used where high acid resistance is required because of its cement base. *the potential for efflorescence is inherent in all cement-based products and it is not to be considered as a manufacturing defect.

  Antique Tile Grout Golden is a High Polymer based fine powder consisting of portland cement, specially selected polymer, properly selected & graded fine fillers, additives and inorganic chemicals. It is used for grouting of tiles, stones, marble joints & edges because it has water repellency properties, excellent adhesion (high bonding strength), soft consistency, workability and seals joint permanently. It is nonshrinking, non-toxic and odourless grout used for sealing of swimming pool & water tank joints as well. Areas of Application Antique Tile Grout Golden is used for grouting of ceramic tiles, marbles, natural stones and edges. *Specially formulated for wet or submerged grouting applications such as swimming pool, bathrooms, toilets, fountains and kitchen areas. *It can be used for external and internal areas. *It is used in residential and commercial areas. *Application up to joint width of 2-10mm. *It is excellent for highly glazed tiles to give a smooth and watertight joints which when set will be both water and mould resistant. Features & Benefits *Aesthetics – Available in specify shades. *Easy to use – Easily to mix with water and forms soft consistency paste which is easy to fill the joints. *Shrinkage & cracking – Avoids cracks formation in the joints and also there is negligible shrinkage. *Service Temperature – Specially formulated for temperature range of 50– 1500C. * Water resistant – Excellent water-resistance making it beneficial for application in areas immersed under water. * Durability & UV resistant – Excellent UV resistance & durability enables the product use for exterior application. * High Strength & abrasion resistant – High strength & abrasion resistance properties makes it suitable for grouting of toilets & bathrooms. Method of Application 1 Surface Preparation * Surface must be cleaned and should be free from dirt, cured tile adhesive. Remove dust with wire brush & by air blower. * For exterior grouting application, wet the tiles prior to applying Antique Tile Grout Golden 2 Mixing * Add the grout powder to the mixing water (w:p ratio – 1 : 2.5 by volume) and mix with slow speed drill (250-300 rpm) to a soft & smooth consistency paste. * If the grout mortar has become too stiff to work, it should be discarded and a new batch should be prepared. 3 Application Apply to the tile joints with squeegee, spatula or putty blade. After application flush the surface of tile using a hard rubber float, working diagonally across the grout joints to fill and compact the joints. All excess grout should be removed with the same rubber float without any delay. *Lesser the quantity of grout left on the face of the tiles while application, the final cleaning will be easier with Antique Tiles & Grout Cleaner – 225. *However, it is important to allow the grout to set in the joint and to let it acquire its initial set before any further cleaning. After the initial set of the grout, clean the tile surface with a pad of cheesecloth or towel dampened with minimum quantity of clean and cool water. Rub in a circular motion to further compact the grout. *The remaining surface grout on the tile can also be cleaned at this time. Scrubbing pad fastened to a float works very well to remove grout from the porous tiles. *Rebuff the tile surface and grout within 1-2 hours to remove all weep water and grout residue from the surface, which helps to reduce the efflorescence and to control colour variation. 4 CLEANING *Polish the tiles when the job is complete with a clean dry cloth. Scrubbing the floor with hot water and soap water is the best. *Due to polymer content, it is advisable to clean the surface immediately after the grouting. Precautions & Limitations *Do not mix excess water. *Antique Tile Grout Golden cannot be used where high acid resistance is required because of its cement base. *The potential for efflorescence is inherent in all cement-based products and it is not to be considered as a manufacturing defect.

Antique Adhesive Silver (Grey) is composed of ordinary portland cement properly selected & graded aggregates, polymer, rheology modifier & additives. It is used for fixing of tiles internally & externally floors because it gives excellent bond on cementitious surfaces like, concrete, plaster, etc. It forms a waterproof barrier between two surfaces and has excellent ‘grab’ properties of tiles to the substrate. Areas of Application For fixing all types of Flooring tiles on internal & external, * Floors. Features & Benefits * Ease of application – Ready to use, needs only mixing with water. * Adhesion – Excellent adhesion prevent falling of tiles. * Shrinkage – Low shrinkage hence prevents cracking of tiles & joints. * Flexibility – Sufficiently flexible to accommodate physical & thermal movements. * Water resistance – Excellent water resistance. * Curing – Needs no water curing, hence saves labour & time. * Traffic ability – Floors can be used after 24 hours of application. * Soaking -Soaking of tiles & backing of surface not required * Slip resistance – Non slip resistance is an advantage to fasten the work * Toxicity – Non toxic Method of Application 1. SURFACE PREPARATION * The surface should be sound, clean, and free from dirt, oil or grease before Antique Adhesive Silver (Grey) is applied. * Substrate should be in Saturated Surface Dry (SSD) condition before application of adhesive. * Substrates should be in plumb before application of adhesive 2. MIXING * Mix 20 kg of Antique Adhesive Silver (Grey) with 5 to 5.5 liters of water. * Mix to a uniform lump-free consistency using a forced action mixer. * Keep it for approximately 5 minutes to fatten it. * Hand mixing is recommended for small quantities only. * Mix as much quantity as can be consumed in 60 min. 3. APPLICATION Apply Antique Adhesive Silver (Grey) paste on substrate with plain side of notch trowel. Press paste firmly to work into substrate. * Comb with notch trowel with notched side, notch trowel to be selected as per required bed thickness. * Spread as much adhesive paste as can be tiled within 15 minutes. * Start placing/fixing of tiles & tap using beating block or rubber mallet. * For large format tiles & stone provide back butter for 100 % coverage & firm bonding. * Periodically remove a tile to check transfer of material on tile. Also check spread of adhesive, if not proper and if becomes non-sticky then scrap it & apply paste again.. 4. GROUTING * Grouting should preferably be carried out at least 24 hours after the completion of tiling * For grout joints upto 3mm wide use Antique Adhesive Silver (Grey) * For grout joints above 3mm wide use RTM Wide. * After grouting clean and polish tiles with a damp sponge or cloth 5. CLEANING * Clean the tools & equipments with potable water immediately after use. Precautions & Limitations * Always add powder to liquid and not liquid to powder. * While working in temperature more than 35OC ( 95OF ) always dampen the substrate & finish faster. * Tiling should not be done when surface temperature is below 4OC. * Antique Adhesive Silver (Grey) should not be used on painted , metal surfaces, ply & gypsum boards.  

Antique Set Plus Copper Adhesive (Grey) PRODUCT DETAILS Grey, high polymer modified tile adhesive, suitable for fixing tiles & natural stones in interior situations. Applications and more difficult and demanding situations consult Antique regarding use of a higher performance adhesive. SHELF LIFE AND STORAGE Shelf life is 12 months from the date of manufacturing in unopened condition.Store in a cool and dry place. COVERAGE This will depend on the nature and flatness of the surface and the method of application, but at 3 mm thickness its is approx. 55-60 sq. ft. per 20kg bag when using a thin bed trowel.For good coverage, it is vitally important that all surfaces should be clean,smooth,plumb,level and free from defects and undulations. PACKAGING : 20kg

Single component Polymer modified Bituminous Waterproof Coating. DESCRIPTION Antique Seal – 115 is composed of viscous, polymer modified, mineral fillers, additives and water as a medium. It is used as a waterproof & weatherproof membrane for concealed roofs, walls of the building structures because it forms relatively thick film and bonds firmly to cementitious surfaces, protects wood & timber and prevents rust formation. Waterproofing is achieved by applying Antique Seal – 115 by brush or mop. It forms joint less and seamless membrane. Areas of Application Waterproofing of concealed roofs, wall, water tank, swimming pool, *Corrosion protection for concrete from sea water. Features & Benefits * Waterproofing – Exceptionally good waterproofing. *Ease of application – Cold applied, bituminous emulsion material. Easily applied by brush or mop. * Durability – Forms relatively thick (1.2-1.5 mm) film providing excellent impermeable and durable membrane. * Movement accommodation – Polymer modified hence forms flexible film. Also accommodates thermal stresses in slab due to variation in temperature. * Reinforcement – Higher reinforcement can be induced with polyester fibre sheet between the coats. * Self priming – No separate or additional primer is required. Method of Application 1 SURFACE PREPARATION *Surface for treatment must be thoroughly cleaned of all laitance, loose material, oil, grease, etc. *Mechanical means such as wire brushing & shot blasting can be used. *Finally vacuum cleaning of all loose solids and liquids can be done if required. *All surface cracks up to 5 mm width should be filled up with Antique Non Shink Crack-x. Cracks more than 5 mm and all separation gaps should be filled up with Antique Flexi Bond URP Modified Adhesive as specified. 2 APPLICATION * Apply Three coats directly by brush or mop and dilute Antique Seal – 115 with three part of water & one part of Antique Seal – 115 powder. * Apply 2nd & 3rd coat in gapes of two or three hours. 3 CLEANING Tools & equipments should be cleaned with potable water immediately after use. Cured material can be cleaned by scrapping

High performance Tile Fixing Adhesive for internal wall/ floor & external Flooring & Tile-on-Tile Applications Description   Antique Adhesive Golden (White) is a blended polymer modified white cement based powder tile adhesive. It gives excellent bond on cementitious surfaces like, concrete, plaster, etc. Antique Adhesive Golden (White) forms a waterproof barrier between two surfaces and has excellent ‘grab’ properties.   AREA OF APPLICATION : For fixing all types of wall tiles on internal wall / floor, external floor & tile on tile applications. As well as swimming pool tiling applications.   FEATURES & BENEFITS : * Ready to use, needs only mixing with 6 Ltr. water in 20kg bag. * Excellent adhesion, low shrinkage * Suitable for indoor and tile on tile applications * Sufficiently flexible to accommodate physical & thermal movements * Needs no curing, needs no hacking or mechanical key on the surfaces * Floors can be used after 24 hours * Curing not required * Soaking of tiles & backing of surface not required   METHOD OF APPLICATION : * The surface to be tiled should be clean and sound. Old surfaces must be free from wax, grease, polish, etc. * The surface to be tiled should be sound and thoroughly cleaned. Old surface should be free from wax, grease,polish etc. * Pour one 20 kg. Bag in approx. 6 lt. of clean water (recommended proportion approx. 3:1 of powder to water by volume). At site, addition of water shall be adjusted to attain desired consistency. Do not put water into the powder. Mix with a trowel / slow speed drills (50 – 100 rpm) until a lump free homogeneous paste is obtained. * Always mix the required quantity, which can be consumed with in the prescribed pot life adopting the mixing proportion mentioned above. * Spread the adhesive to a thickness of approx. 3-6 mm and comb with a notched trowel. Strictly apply the adhesive paste which can be tiled with in 10 to 15 mins. * Intermittently touch the adhesive paste on substrate by finger. If the adhesive sticks to fingers then continue tiling and if not scrape off the adhesive and apply new coat. * Start placing the tiles on the surface to be tiled. Tap the tiles properly to ensure complete coverage of the backside of tiles and to eliminate the possibility of any air voids. * Keep joints between two-tiles using spacers that are available with Antique Adhesive Golden (White) bag. * Allow tiling to set for 24 hours and start filling joints next day. * Use mechanical clamps for holding the heavy stones in positions on vertical surface. * Antique Adhesive Golden (White) also can be applied at 3-mm thickness for fixing of normal tiles in toilets and swimming pool area.

DESCRIPTION The ultimate one-step, polymer fortified, thin-set mortar for interior and exterior installation of ceramic tile, stone, quarry tile, pavers and brick. Antique Glass Mosaic Tile Adhesive (white), designed to just mix with water, has a long open time with unsurpassed adhesion and workability. USES Excellent for fixing Glass mosaic tiles in exterior and underwater applications like for fixing swimming pool, Terrace, Kitchen, Bathroom. ADVANTAGES * Exceeds Shear Bond Strength Requirements. * Ultimate adhesion for porcelain and glass tiles. * Superior for exterior and submerged applications. * High shear bond strength. * Smooth creamy formula. * See limitations. SUITABLE SUBSTRATES * Concrete / Masonry . * Concrete block . * Cement mortar beds . * Non-water soluble cut-back adhesive* * Existing ceramic tile and stone. * Interior use only. ** Consult cement backer board manufacturer for specific installation recommendations and to verify acceptability for exterior use. APPROXIMATE COVERAGE *55–60sft per 20kg bag with 1/4″ x 1/4″ (6 mm x 6 mm) notched trowel. *Coverage will vary depending on trowel notch size, type and size of tile and substrate. SHELF LIFE Factory sealed containers of this product are guaranteed to be of first quality for one (1) year* if stored off the ground in a dry area. * High humidity will reduce the shelf life of bagged product. PACKAGING 1kg, 5kg, 20kg bag Color: White LIMITATIONS *Not for use directly over particle board, luan, Masonite® or hardwood floors. *Adhesives/mastics, mortars and grouts for ceramic tile, pavers, brick and stone are not replacements for waterproofing membranes. When a waterproofing membrane is required, use a Antique Glass Mosaic Tile Adhesive (White) Waterproofing Membrane Note: Surfaces must be structurally sound, stable and rigid enough to support ceramic/stone tile, thin brick and similar finishes. Substrate deflection under all live, dead and impact loads, including concentrated loads, must not exceed L/360 for thin bed ceramic tile/brick installations or L/480 for thin bed stone installations where L=span length. CAUTIONS Consult MSDS for more safety information. *Some marbles and other stone have low flexural strength and may not be suitable for installation over wood floors. *During cold weather, protect finished work from traffic until fully cured. *Contains portland cement and silica sand. May irritate eyes and skin. Avoid contact with eyes or prolonged contact with skin. In case of contact, flush thoroughly with water. *Wait 14 days after the final grouting period before filing water features with water at 70°F (21°C) *DO NOT take internally. Silica sand may cause cancer or serious lung problems. Avoid breathing dust. Wear a respirator in dusty areas. *Keep out of reach of children.

“Antique Wall Mortar” is a water resistant Luster wall coating for interior as well as exterior use. “Antique Wall Mortar” make building components totally water proof.”Antique Wall Mortar” is totally crack proof with high bonding which gives colour resistancy as well as weather proofing. Get luster finish with UV resistance & eco friendly with high bond luster coating.   Salient features of “Antique Wall Mortar” *Make building component Totally Water *Made wall totally crackproof with high bonding. *Colour resistancy as well as Weatherproofing. *Use for interior as well as exterior coating. *Get Luster Finish With UV Resistance and Eco friendly’’Antique Wall Mortar”   Application Procedure Remove all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and clean water. The substrate should be clean, free from dust, grease and loose materials. Dry and absorbent surfaces should be moistened with sufficient quantity of clean water. Mix “Antique Wall Mortar” with 60-65% clean water slowly to make paste. Continue the mixing for 10-15 minutes with putty grind machine till a uniform paste is formed. After thoroughly mixing “Antique Wall Mortar” apply the first coat with Antique base mortar on already moistened wall surface from bottom to upward direction uniformly with the help of putty blade. This would ensure less wastage and proper finish. After drying of first coat of Antique base mortar just rub the surface gently with west sponge or rub the surface very gently with the putty blade in order to remove the loose particles. Allow the surface to dry for atleast 24 hours and then apply second coat of with Antique finish mortar Leave the surface to dry completely. After drying of second coat remove marks if any with the help of moist sponge or rub the surface very gently with the putty blade. Leave the surface to dry preferably for overnight. Always prepare a required quantity of putty and use it within 2-3 hrs. of mixing with water The total thickness of the coats should be limited to maximum 1.5mm. It is not essential to rub the surface done with “Antique Wall Mortar”, however if you need to remove unevenness before applying any kind of paint/distemper, gently level the walls/ceiling surface with very fine water proof emery paper of not less that 500 number to get a glossy white surface.   Precautions During Application Mixing of “Antique Wall Mortar” is very important and hence extreme care is to be taken for proper and thorough mixing with hand or mechanical stirrer in order to get best results. “Antique Wall Mortar” should be done over fully cured surface. It is recommended not to rub “Antique Wall Mortar” strongly and harshly with rough emery paper. This breaks the film formed over “Antique Wall Mortar”, which decreases the water repellency properties. The total thickness of the coat should be limited to maximum 1.5mm. In case of fresh concrete/mortar surface it is recommended that two coats of Antique Base Mortar be apply before application of “Antique Wall Mortar”.   Coverage The coverage area of “Antique Base Wall Mortar” on smooth normal mortar wall is 25 to 30 Sq. Ft/Kg/mm The coverage area of “Antique Finish Wall Mortar” on smooth normal mortar wall is 35 to 40 Sq. Ft/Kg/mm The coverage area, however, will depend upon the quality of the substrate.   Note Generally the cause of efflorescence on the walls surface is the brick masonry, which is due to the quality of bricks, sand and water, If the effect of efflorescence on the brick masonry seems to be very high then proper care should be taken to control the efflorescence. The efflorescence problem on brick masonry if exists impairs the bonding of “Antique Wall Mortar” as is with any other product. * for High Effected efflorescence walls Contact our Customer Care for solution. Packing “Antique Base Wall Mortar” is available in 20Kg Pack. “Antique Finish Wall Mortar” is available in 10Kg Box Pack.

Antique Designer Tiles is a widely prominent and popular name in the field of manufacturing and supplying varied collections of Decorative Tiles in India.

Antique Designer Tiles is a widely prominent and popular name in the field of manufacturing and supplying varied collections of Elevation Tiles in India.

Antique Adhesive Silver (Grey) is composed of ordinary portland cement properly selected & graded aggregates, polymer, rheology modifier & additives. It is used for fixing of tiles internally & externally floors because it gives excellent bond on cementitious surfaces like, concrete, plaster, etc. It forms a waterproof barrier between two surfaces and has excellent ‘grab’ properties of tiles to the substrate.

Wall Putty is a water resistant white cement based putty ideal for use on concretemortar walls (Internal and External) and ceilings. It fills the fine pores of mortarconcrete walls and ceilings and provides a white, smooth and dry surface, essential for painting.

Antique Wall Mortar is a water resistant Luster wall coating for interior as well as exterior use. “components totally water proof. Antique Wall Mortar is totally crack proof with high bonding which gives colour resistancy as well as weather proofing.

Antique Non Shrink Filler is a cement based polymer modified powder material for filling cracks in plastered surface. It is composed of cement, select aggregates, polymer & additives which requires on site addition of water only.

Fast acting, concentrated wall and floor tile cleaners with antibacterial performance for tiled surfaces. The special formulation removes dirt, grease and stains from tiled surfaces. When dry, the surface is left hygiencially clean. Suitable for all types of ceramic tiles, slate, stone, marble & terrazzo.