ISO Certification Services

• ISO 17020 Accredited Inspection Agency: ISO 17025 Accredited Testing Laboratory

From 10th August 2009, the Saudi Arabia Customs Authorities made it mandatory to get Saudi Arabian Standard Organisation (SASO) certificate (referred to as "SASO Conformity Certificate) for importing goods to Saudi Arabia. The acronym SASO stands for ‘Saudi Arabian Standards Organization’. A SASO COC (Certificate of Conformity) is a declaration of the conformity with the type approval of applicable SASO standard. The purpose of this document is to ensure the free movement of goods within Saudi Arabia. All products being exported to Saudi Arabia require a Certificate of Conformity also referred to as a SASO CoC to enable them to be cleared through Saudi Customs. Product Scope• Sanitary Ware and other Construction Products Materials and Surfaces in Contact with Food• Paint, Thinner and Household Detergents • Electric Batteries and other Low-Voltage Equipment• Degradable Plastic Products • Solar Photovoltaic Systems• Textile and Personal Protective Equipment • Automotive Spare Parts and Motor Lubricating Oils• Toys, Playground Amusement and Fairground Equipment • Electric and customized vehicles, trailers and trailer protective devices. The Kingdom of Saudi Arabia requires that all consignments of products that are covered by a Saudi Standards, Metrology and Quality Organization (SASO) Technical Regulation and that are to be exported to the country should be issued with a Product Certificate, and that every consignment should be accompanied by a Shipment Certificate. These certificates signify compliance with the applicable standards and technical regulations. With the development of the Saudi Product Safety Program (SALEEM), SASO has implemented SABER, an electronic conformity assessment platform. SASO encourages the Trade to use this platform to request and obtain both Product and Shipment Certificates for goods falling under SASO Technical Regulations, and to request and obtain a Self Declaration and a Shipment Certificate for goods not covered by any SASO Technical Regulation. SASO. • Products not covered by a Technical Regulation can obtain a Consignment-Based Technical Assessment Certificate, to demonstrate compliance of the product with the SASO and/or International Standards FORMS OF ATTESTATION: A Product Certificate of Conformity (PCoC) issued within SABER system is a requirement before any Shipment Certificate can be issued to a regulated product intended to be shipped to Saudi Arabia. India's major exports to Saudi Arab include basmati rice, textiles and garments and machinery. Saudi imports from India amounted to $7 billion or 2.7% of India's overall exports in the year 2015. PURPOSE OF ATTESTATION (PCoC and SC): The Shipment Certificate (SC) is needed for Customs clearance of the imported goods (mandatory document) • The Product Certificate of Conformity provides the Saudi authorities with a basis for conducting post-market Surveillance in the Saudi Arabia market. CDG helps you through out all steps in getting SASO certificate of compliance.

Mark certification consultants offer amazing ISO 20000-1: 2011 Certification Services to our clients at budget-friendly prices. Our company offers various kinds of certifications to valued customers. Our organization provides services to the customers that are flawless, transparent, and perfectly executed. Established in Hyderabad, our professionals provide ISO certification which covers the service management system. The certification covers assurance that service requirements will be fulfilled by the service provider. ISO 2000-1:2011 is the international standard for quality management based on IT service management. Our company ensures that our customer benefits from a reduction in response time and interruptions to IT services. We follow strict quality checks and high-quality work for our offered service. We are providing ISO certification service hassle-free and also quickly. We offer constant support till the completion of the process of certification to the customers.

• Country of Origin: India
• Certification: ISO 17712
• ISO 17020 Accredited Inspection Agency: ISO 17025 Accredited Testing Laboratory

CDG is an ISO 17021 accredited inspection body & ISO 17025 accredited testing laboratory for ISO 17712 standards. We provide accredited ISO 17712 certification services in India.CIL provide ISO 17712 certification in India. CIL is an accredited certification in India. The International Standards Organization (ISO) establishes testing standards on a wide variety of products. ISO 17712 pertains to mechanical security seals, which are classified into 3 groups: • High Security Seals • Security Seals • Indicative Seals The standard is a copyrighted product of the International Standards Organization (ISO).  The information presented below is intended to provide seal consumers with a general understanding of the ISO 17712 standard. The information is a paraphrased summary of the key sections of the standard with a focus on the MINIMUM requirements for high security seals such as bolt seals, cable seals and barrier seals. High Security Seals These seals are designed to provide the most security. The most common high security seals are bolt seals (typically 7mm diameter or more), cable seals (typically 3.5mm diameter minimum) and barrier seals. These seals also serve as barriers since they require special tools (heavy duty bolt cutters, cable cutters or cutting wheels) to remove the seals. Typical applications include placing a bolt seal or cable seal in the hasp of the door latch. Other common practices are to wrap the keeper bars of a shipping container (or truck trailer) with a long cable seal or use a barrier seal (also known as a “keeper bar lock”). The Customs-Trade Partnership Against Terrorism (C-TPAT) is a joint effort between the United States government and businesses involved in importing goods into the United States. One of the C-TPAT guidelines is to use seals rated High Security for international shipments which cross borders. ISO 17712 Requirements for High Security Seals Section 4.2.1 – All high security seals must be permanently marked with the manufacturer name (or logo) and uniquely numbered Section 4.2.2 – All high security seals must be marked with an “H” to designate the high security classification. Section 4.4.1 – All high security seals shall be designed to mitigate tampering and leave evidence if tampered. The seal manufacturer will also certify in writing that they conduct periodic tamper evident testing on their seals in conjunction with an accredited process review organization. Section 5.1.2 – All high security seals must be tested by an independent testing lab to successfully pass minimum levels for tensile, shear, bending, and impact. Seals are tested as sold. The independent lab testing must be completed AT LEAST every 24 months to verify seals are still in compliance, or sooner if there is a significant design change in the seal. All of CIL’s high security seals meet the requirements for ISO 17712. The links to our certifications can be found on the respective product pages. Security Seals These are mid-level security devices which are lower cost than High Security Seals, but offer a higher break strength than Indicative Seals. The higher break strength assures the seals are durable for the application and not prone to breaking unintentionally. These seals typically include lower diameter cable seals (3mm diameter and less) and the high-strength plastic seals. These seals are typically removed with cable/wire cutters or other light weight tools. Indicative Seals These devices offer the lowest level of security. They are intended to show tampering, but are not intended to be a barrier for access. This category typically includes metal, plastic, or wire seals which can be pulled apart by hand or cut with a tin snips or scissors.

ISO 9001:2015 Quality Management System (QMS) Certification is an internationally recognized standard that demonstrates an organization's commitment to quality and customer satisfaction. Our certification services help you implement and maintain a robust QMS that enhances operational efficiency, reduces risks, and fosters continuous improvement. By achieving ISO 9001:2015 certification, your business gains a competitive edge, ensuring that your products or services consistently meet customer and regulatory requirements. Our team of experts provides end-to-end support, from initial assessment to certification and ongoing audits, empowering your organization to deliver excellence at every level.

What is ISO 9001:2015 Certification?ISO 9001:2015 is the latest revision of the ISO 9001 international standards that specifics requirements for a quality management system (QMS).  The requirements are specified within seven clauses: Context of the organization Leadership Planning Support Operation Performance evaluation Improvement Organizations will get certified to this standard in order to demonstrate their ability to consistently provide products and services that meet customer, statutory and regulatory requirements. Certification is granted by accredited certification bodies (registrars) that will audit an organization at planned intervals to confirm conformance to the ISO 9001:2015 standard.The standard can be applied to any organization. Its benefits include enhanced customer satisfaction, standardized processes, improved quality of products and services, and a culture of continuous improvement.Role of consultant Awareness Training to personnel on ISO 9001 Training on Internal Quality Auditor Documentation like SOP, Quality Manual Conducting Internal Audit Assisting organization throughout in the certification process   We provide ISO 9001 certification consultancy in all over India including cities like Delhi, Mumbai, Chennai, Kolkata, Bengaluru, Ahmedabad, Hyderabad, Patna, Kanpur, Lucknow, Allahabad, Noida, Faridabad, Gurgaon, Jaipur, Ajmer, Jodhpur, Kota, Udaipur, Vadodara, Surat, Rajkot, Silvassa, Vapi, Pune. Aurangabad, Nashik, Goa, Daman, Diu, Raipur, Bilaspur, Bhubaneshwar, Cuttack, Jamshedpur, Vishakhapatnam, Siliguri, Guwahati, Varanasi, Shillong, Coimbatore, Mysore, Chandigarh, Indore, Bhopal, Shimla, Jammu, Sri Nagar, Rudrapur, Haridwar, Gangtok.Overseas clients are in Singapore, Mauritius, Thailand, China, Fiji Island, Sri Lanka and NigeriaISO 9001:2015 specifies requirements for a quality management system when an organization: Needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements, and Aims to enhance customer satisfaction through the effective application of the system, including processes for improvement of the system and the assurance of conformity to customer and applicable statutory and regulatory requirements. All the requirements of ISO 9001:2015 are generic and are intended to be applicable to any organization, regardless of its type or size, or the products and services it provides.

Benefit from iso certification:- * improve documented processes * customer satisfaction * better products and services * improved quality & profit levels * improved communications * cost savings * improved efficiency and productivity * minimize waste, inappropriate or rejected work and fewer complaints. * reduces the likelihood of product recall & adverse publicity * reduced duplication of inspections * open up the market place to increased opportunities. contacts us for iso certification, iso training, documentation, implementation.

With the support of our professionals, we are engaged in offering ISO:45001 Certification Service for our esteemed customers. Our services provide perfect interior according to client needs. Moreover, these services are offered within a limited period.  

Food safety is related to the presence of food-borne hazards in food at the point of consumption (intake by the consumer). As the introduction of food safety hazards can occur at any stage of the food chain, adequate control throughout the food chain is essential. Food safety is ensured through combined efforts of all parties participating in the food chain. ISO 22000 specifies requirements for a food safety management system that combines elements such as interactive communication, system management, prerequisite programmes and HACCP principles.   The process As an organisation, the steps involved for you are:   Applying for certification: Review and accept our customised Proposal, and you’re underway! Achieving certification: Firstly, a pre-certification audit or “test run” will be conducted either on-site (at your premises) or off-site (at our premises) or both, to see whether your management systems are suitable. Areas of concern will be reported. Once concerns have been actioned, an on-site certification audit will be conducted, where we will examine the extent to which you address the program criteria. Areas of concern will be reported. Once we are satisfied there are no outstanding issues that present an unacceptable risk to you, your employees, customers, regulators, Equal Assurance or others, we can proceed to issue a Certificate of Confidence. Well done! Maintaining certification: Depending on the level of risk, we will conduct a series of surveillance audits (and in some cases special and follow-up audits) and tri-ennial re-certification audits, to examine the extent to which you continue to address the program criteria. Areas of concern will be reported. So long as we continue to be satisfied there are no outstanding issues that present an unacceptable risk to you, your employees, customers, regulators, Equal Assurance or others, your certification remains valid.

Pre & Post ISO Certification Services provide end-to-end support for organizations seeking ISO compliance. Pre-certification services include gap analysis, documentation assistance, employee training, and implementation support to ensure readiness for certification audits. Post-certification services focus on maintaining compliance through surveillance audit preparation, system updates, corrective actions, and continuous improvement.

ISO Certification Consultancy Services assist businesses in achieving ISO certifications, ensuring compliance with international quality, safety, environmental, and management standards. These services include gap analysis, documentation, process improvement, internal audits, and training to align operations with specific ISO standards such as ISO 9001, ISO 14001, and ISO 45001. Consultants provide end-to-end support, from initial assessment to certification audits. By obtaining ISO certification, organizations improve operational efficiency, enhance customer trust, and gain a competitive edge in the global market.

• Certification Type: IIP Certificate and UN Certificate as per IMO IMDG Code & IATA ICAO
• Delivery time: 10 to 35 Working Days
• Mode Of Payment: Advance via Bank Transfers
• Mode Of Service: Online
• Service Location: PAN India
• Type Of Services: IIP Certification Consultancy
• Mode of Report: Digital
• Document Required: GST, Packing List, Package Specifications, MSDS, Mode of shipment, Manufacturer & Exporter details
• Brand: IIP
• Brand: UN
• Type: Online

Ours is a Thane (Maharashtra, India) based industry that is involved in offering ISO Certification Consultancy Services. We have a team of professional and experienced consultants that provide apt advice on any issue related to ISO certifications. Getting an ISO certification is important as it increases the Effectiveness of managing business processes and the credibility of an organization. Thus, we help in guiding you on how to follow guidelines of QMS, EMS, OHSMS & EnMS standards. We ensure complete satisfaction to the clients. Also, our services are nominally charged. We also get your organization certified to any of the above standards as per your preference on the certification body. We also audit organizations and give awards as best QMS/EMS/OHSMS/EnMS practicing organizations. For details contact. Our Speciality is Internal Auditor training

• Type of Certification: New Certification
• Service Mode: Online
• Payment Mode: Online/Offline
• Type Of Ownership: Proprietorship
• Country of Origin: India
• Application: License

Listed amid the celebrated names in the industry, we are providing ISO certification consultancy services to the businesses in the city. Ours is a group of skilled professionals, who work together & with clients and provide solutions as per their needs. With this, we help them in completing the paperwork and other legal procedures. We are operating from Nanded (Maharashtra, India); clients can get in touch with anytime, through our website. Our service charges are also reasonable.

ISO certification services validate an organization's commitment to quality, efficiency, and customer satisfaction. Achieving ISO certification signifies adherence to international standards, enhancing credibility and market competitiveness. These certifications cover various aspects, such as quality management, environmental practices, and information security. Organizations undergo rigorous assessments to meet ISO requirements, ensuring robust systems and processes. ISO certification is a globally recognized hallmark, attracting customers and stakeholders, and demonstrating a dedication to excellence in products or services.

Location/City Pan India Type of Certification Renewal Type Of Industry Manufacturing Type Of Service Provider Consulting Firm Established in the year 2000, at Mumbai, Maharashtra, India, we “Deming Certification Services Pvt. Ltd.,” offer clients total certifications solutions that helps in enhancing systems and processes at their end. Further, the expertise of certifications personnel also assist us in changing the working pattern of several organizations by bringing positive change in their work culture as well as inculcating quality in every sphere of involved operations.   The solutions offered by us cover areas like ISO 9001 Certification, ISO 27001 Certification, ISO 14001 Certification, SQC/SPC  Certification, ISO 17025  Certificationand ISO 22000 Certification. Apart from this, we also offer solutions for HACCPCertification, ISO/TS 16949 Certification, OHSAS 18001, Social Accountability Certification, Risk Assessment Services, ISO 20000 Certification, Project Management Certification, SA 8001 Certificationand Third Party Inspection and Verification Services.   Our business operations are led by Mr. Mukesh Singh, who has with him rich experience in our industry sector. His visionary approach has also assisted us in emerging amongst fastest growing business management certification companies in our industry sector. Further, the service support provided by experienced industry professionals also allow us to offer clients a wide range of business certifications services for availing different certifications.   Today, our team of experts work in close coordination with clients and help them to access their specific requirements as well as add value to their systems. This is achieved through designing formats as well as assisting in implementation by continuous training, review of quality manual as well as undertaking other allied procedures. Other than this, the competitive prices of our services also makes them one of the most demanded in the market.

Chirag Group Of Company is a Kolkata (West Bengal, India) based company, which is indulged in providing superior class ISO registration services to the clients. To get your company registered under ISO and getting the certification of genuine standardization and quality assurance of your products & services, you need to register under ISO. Our team members are experts in assisting various clients in completing all the major operations to register under ISO.

We offer iso certificate. This is now a iso 9001:2008 certified company.

ISO certification helps to boost your business quality additionally the overall potency of thebusiness. ISO is an independent organization that gives standards in terms of quality, safety,and efficiency of products and services provided by businesses. With the increasingcompetition among the business, it’s top of the notch to deliver top quality of goods &services so as to sustain within the market.  ISO 9001 CERTIFICATION - QUALITY MANAGEMENT SYSTEM  ISO 14001 CERTIFICATION – ENVIRONMENTAL MANAGEMENT SYSTEM (EMS)  ISO 27001 CERTIFICATION - INFORMATION SECURITY  ISO 45001:2018 CERTIFICATION – OH&S CERTIFICATION (OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEM)  ISO 22000:2018 CERTIFICATION – FOOD SAFETY MANAGEMENT SYSTEM (FSMS)- FSSC22000 Certification  ISO 20000:2018 CERTIFICATION – IT SERVICE MANAGEMENT SYSTEM Other Certification  CE certification for Medical Devices and Machines  BIS registration for Electronic and Electrical Devices  HACCP: Food Safety Management -- Hazard Analysis and Critical Control Points (HACCP)  KOSHER (Just as the Food and Drug Administration inspects the US food supply to ensure that it is safe to eat and free from contamination according to US laws, Kosher certification agencies like EarthKosher inspect and certify food as well, in keeping with Jewish dietary laws.) SEDEX Certification -is a globally recognized accreditation that signifies a company’s commitment to ethical and responsible sourcing and manufacturing practices. It is a mark of trust that indicates a company’s dedication to social and environmental responsibility. SA8000-- The SA8000 Standard is an auditable certification standard thatencourages organizations to develop, maintain, and apply socially acceptable practices in the workplace. It was developed in 1989 by Social Accountability International, formerly the Council on Economic Priorities, by an advisory board consisting of trade unions, NGOs, civil society organizations and companies.The SA8000's criteria were developed from various industry and corporate codes to create a common standard for social welfare compliance. The current (2014) version of the standard is built on earlier 2001, 2004 and 2008 versions.

In agreement with the stellar reputation of ours, we offer our esteemed clients a varied range of services of ISO Certificate Registration Services. We are committed towards meeting our clients precise needs. Our service is far and wide availed for its consistency & affordability. Our accomplished staff provides consultation to the clients regarding the whole registration process. The service is provided as per the specifications given by clients. Other than that, our service is highly appreciated for timely execution among our clients. Details : ISO 9001 contains all of the requirements which an organisation must address within their Quality Management System (QMS) if they wish to be certified against the Standard. The majority of these requirements would be identified by many organizations as 'common sense' topics which they would want to address in order to run their business well e.g. sales, design, purchasing, training, calibration of test equipment, control of records. ISO 9001 is written by a committee (TC 176) and is designed for use in any type of organisation. This inevitably means that there are compromises in the wording of the Standard and some interpretation is often needed.

E- Filling Infotech Private Limited is a known name, specialized in providing ISO certification services from Kolkata (West Bengal, India). With our services, we assist clients to prepare for the implementation of the ISO standards, filling & filing application, audits, and completing other related formalities in a careful manner. We majorly cater to ISO certifications requirements of clients across IT and Consulting, Manufacturing, Banking, and Finance sectors. To schedule an appointment with one of our consultants, ring us on the given numbers.