Tile Adhesives Dealers in Morbi

• Type: Tile Adhesives
• Material: Adhesive
• Application: Tiles, Tiles Use
• Color: White, Grey
• Feature: Waterproof
• Form: Powder
• Adhesive: Pressure Sensitive
• Adhesive Side: Single Sided
• Country of Origin: India

  Tile adhesive is a special type of glue used to fix tiles all around the home. Tile adhesive is a ready-made mixture made from Portland cement, polymers such as epoxy and selected aggregate particles with some additives added in it to improve its property for laying tiles.

• Type: Tile Adhesives
• Application: Tiles Use
• Raw Material: made with 53 major cement company

SmartCare Tile Adhesive for Normal Application is a single component Cement based polymer-modified adhesive for fixing a variety of tiles and natural stones in fresh constructions or complete re-tiling. you can also used it for floor vitrified tiles, wall tiles,granite tiles,marble,glass tiles,exterior floor tiles etc 1 bag containg 25 kg material for more detaile you can see images

• Ash content: 3%
• Compressive strength: 1500 kg/cm2
• Flexural strength: 350 kg/cm2
• Tensile shear strength: 170 kg/cm2
• Max. Operating Temp C.: 180 to 200 deg. C
• Working time 30 deg. C.: 30 to 40 minutes

• Brand Name: Deflex

*Required Business Partner* As Dealer, Distributor Or Super Stockist for Leading Brand Dharma Bond In all over Country Worldwide.   Dharma Bond TILE ADHESIVE Powerful Bonding With Advanced Polymer Technology   Dharma Bond   High Quality Grouting Famous For Its Durability, Non-porous, Stain-Resistance And Waterproof Nature.      *Dharma Bond*    Fiber Base    Tiles Adhesive Block Joining Mortar Redy Mix Plaster    

• Brand Name: Antique Platinum Adhesive (white)

We are counted among the trustworthy Manufacturers and Suppliers of Antique Platinum Adhesive (white) from morbi, Gujarat. These adhesives are manufactured by using qualitative raw compounds under the strict guidance of industry professionals. Our White Platinum Adhesives find their applications for both interior and exterior installations, which includes under water applications for fixing tiles, marble etc. Platinum Adhesive is known for their workability and high bonding strength.   Description : The ultimate one-step, polymer modified, thin-set mortar for interior and exterior installation of ceramic tile, stone, quarry tile, pavers and brick. Antique Platinum Adhesive , designed to just mix with water, has a long open time with unsurpassed adhesion and workability.Uses : Excellent for exterior and underwater applications, Like for fixing swimming pool tiles, marble, granite and all kind of ceramic tiles.Advantages : Exceeds Shear Bond Strength Requirements. Ultimate adhesion for porcelain and glass tiles. Superior for exterior and submerged applications. High shear bond strength. Smooth creamy formula. See limitations. Suitable Substrates : Concrete / Masonry . Concrete block . Cement mortar beds . Non-water soluble cut-back adhesive* Existing ceramic tile and stone Interior use only : Consult cement backer board manufacturer for specific installation recommendations and to verify acceptability for exterior use.Approximate Coverage : 55–60sft per 20kg bag with 1/4" x 1/4" (6 mm x 6 mm) notched trowel. Coverage will vary depending on trowel notch size, type and size of tile and substrate. Shelf Life : Factory sealed containers of this product are guaranteed to be of first quality for one (1) yearif stored off the ground in a dry area. High humidity will reduce the shelf life of bagged product. Packaging : 1kg, 20kg bagColor : WhiteLimitations : Not for use directly over particle board, luan, Masonite® or hardwood floors. Adhesives/mastics, mortars and grouts for ceramic tile, pavers, brick and stone are not replacements for waterproofing membranes. When a waterproofing membrane is required, use a Antique Platinum Adhesive Waterproofing Membrane. Note : Surfaces must be structurally sound, stable and rigid enough to support ceramic/stone tile, thin brick and similar finishes. Substrate deflection under all live, dead and impact loads, including concentrated loads, must not exceed L/360 for thin bed ceramic tile/brick installations or L/480 for thin bed stone installations where L=span length.Cautions : Consult MSDS for more safety information. Some marbles and other stone have low flexural strength and may not be suitable for installation over wood floors. During cold weather, protect finished work from traffic until fully cured. Contains portland cement and silica sand. May irritate eyes and skin. Avoid contact with eyes or prolonged contact with skin. In case of contact, flush thoroughly with water. Wait 14 days after the final grouting period before filing water features with water at 70°F (21°C) Do Not take internally. Silica sand may cause cancer or serious lung problems. Avoid breathing dust. Wear a respirator in dusty areas. Keep out of reach of children.  Specifications subject to change without notification. Results shown are typical but reflect test procedures used. Actual field performance will depend on installation methods and site conditions.Installation : Surface Preparation : All surfaces should be between 40°F (14°C) and 90°F (32°C) and structurally sound, clean and free of all dirt, oil, grease, paint, concrete sealers or curing compounds. Rough or uneven concrete surfaces should be made smooth with Antique Platinum Adhesive Latex Portland Cement Underlayment to provide a wood float (or better) finish. Dry, dusty concrete slabs or masonry should be dampened and excess water swept off. Installation may be made on a damp surface. Concrete slabs must be plumb and true to within 1/4" (6 mm) in 10 ft (3 m).Note : Antique Platinum Adhesive does not require a minimum cure time for concrete slabs. Expansion joints shall be provided through the tile work from all construction or expansion joints in the substrate. Follow ANSI specification A108.01-3.7 “Requirements for Movement Joints: Preparations by Other Trades” or TCNA detail EJ-171 “Movement Joints—Vertical & Horizontal”. Do not cover expansion joints with mortar. Installer must verify that deflection under all live, dead and impact L/360 for ceramic tile and brick or L/480 for stone installations where L=span length. Mixing : Place clean, potable water into a clean pail. Add Antique Platinum Adhesive. Use approximately 5-5.5 litres of water for 20kg of powder. Mix by hand or with a slow speed mixer to a smooth, trowelable consistency. Allow mortar to slake for 5–10 minutes. Remix with out adding any more water or powder. During use, stir occasionally to keep mix fluffy. Do Not temper with water.Application : Apply Antique Platinum Adhesive to the substrate with the flat side of the trowel, pressing firmly to work into surface. Comb on additional adhesive with the notched side. Note : Use proper sized notched trowel to ensure full bedding of the tile. Spread as much mortar as can becovered with tile in 15–20 minutes. Back butter large tiles >8" x 8" (>200 mm x 200 mm) to provide full bedding and firm support. Place tiles into wet, sticky mortar and beat in using a beating block and rubber mallet to embed tile and adjust level. Check mortar for complete coverage by periodically removing a tile and inspecting bedding mortar transfer onto back of tile. If mortar is skinned over (not sticky), remove and replace with fresh mortar.Grouting : Grout the installation after a minimum of 24 hours curing time at 70oF (21oC). Grout with Antique TG Silver Sanded Grout or Antique TG Golden Unsanded Grout mixed & Antique Platinum Grout Admix Plus. For maximum stain resistance use Antique Platinum Adhesive Stain free Grout for Floor N’ Wall.Maintenance : Antique Platinum Adhesive grouts require routine cleaning with a neutral pH soap and water. All other Antique Platinum Adhesive materials require no maintenance but installation performance and durability may depend on properly maintaining products supplied by other manufacturers.Warranty : Antique Designer Tiles warrants that Antique Platinum Adhesive is free from manufacturing defects and will not break down, deteriorate or disintegrate under normal usage for a period of one (1) year from date of purchase subject to the terms and conditions stated in Antique Platinum Adhesive Product Warranty.

• Brand Name: impele impex
• Application: ceramic wall tiles
• Type: ENGOBE WHITE POWDER
• Model Number: ii4
• engobe white powder: 12000

While climbing on the success ladder, it has become increasingly important for us to deliver high grade engobe white powder. Tested as per the industry guidelines and clients' requirements, this ceramic raw material is available in varied air-tight packaging materials. Widely used in ceramics and apart from this, it is also used as a light diffusing material in bulb & as a paint to modify gloss level. This engobe white powder is acclaimed across the nation for accurate composition, purity, solubility, eco-friendliness, high effectiveness and longer shelf life.

• Brand Name: Tile Pro
• Packaging Type: PP Bag
• Country of Origin: Made in India
• Model Number: NSA Gold
• Packaging Size: 20 Kg
• Form: Powder
• Strength: High
• Is It Eco Friendly: Yes

marble tile adhesive, Plain Colour Wall Tiles - Black, Granite Stone

TILES ADHESIVES, Powdered Tile Grout, Tile Adhesives, Epoxy Grout

ceramic tile adhesives, Ceramic Tiles, Sanitarywares, Water Taps

Tile Adhesive

Tile Adhesive

Tile Adhesive, Designer Tiles, Elevation Tiles, Floor Tiles, Roofing Tiles

Tile Adhesives, Epoxy Grout

Tiles Adhesive

Tiles Adhesive, Epoxy Grout, Concrete Admixture, Tile Grout, Tile Cleaner

Tiles Adhesive

wall tile adhesive, Religious Wall Tiles, Table Top Wash Basin