Submersible Motors Dealers

We are one of the main manufacturers, suppliers, and exporters of Oil Filled Submersible Motor in Ahmedabad, Gujarat. The USP of our product is that it is reliable, of high quality and requires low maintenance. Also, the motor has an elevated starting torque, mechanical compactness, and delivers superior performance. Naigra Industries Oil Filled Submersible Motor is the evolution of the 4” Submersible Rewind able Motor. Some of its features are It has a removable cable connector It has a standard mechanical seal graphic/ceramic The winding wire is dual coated with insulation class-B The motor cable length is 3m/3core   Technical Features  : Motor casing and shaft made in Stainless Steel AISI 304. High resistance cast iron nickel plated upper / lower bracket & Motor base. Upper / lower bracket & Motor base of Cast Iron Axial and radial thrust ball bearing. Standard mechanical Seal graphite\ceramic. Optional able seal type SIC Special Cooling fluid for a better lubricant effect to increase life of moving parts. The liquid with its high thermal capacity diaphragm and sand slinger protection. Flange & Shaft Protrusion as per NEMA Standard. Degree of Protection - IP 58. Dynamically balanced rotor ensure smooth running. Single phases 0.37 kW to 2.2 kW, 220-230 Volts/50Hz. Winding wire is dual coated with insulation class-B. Removable cable connector. Motor cable length 3m/3 core. Operating limits  : Maximum voltage fluctuation admissible versus nominal rated voltage - +6%-10%. Maximum water temperature - 35oC with at least 0.08 mt/sec of water flow speed Maximum motor starting per hour  - 30 Axial thrust - 1500N from 0.37 Kw to 2.2Kw.

• Power: Electric
• Phase: 3 Phase
• Voltage: 180V-240V
• Usage: Industrial, Commercial
• Pressure: High Pressure
• Maximum Head: Up to 270 Feet
• Maximum Discharge: up to 1400 Lit/Min.

Features Robustness High strength Low maintenance Operation fluency Technical Specification 3 HP to 10 HP in 3. 3.0 H.P. to 15 H.P. Three Phase. 0.5 H.P. to 2.0 H.P. Single Phase. Able to run in Low Voltage. Available in horizontal & Vertical with multistage with S.S. body. Higher Head with Higher Discharge for Agricultural use. Maximum head up to 270feet. Maximum Discharge up to 1400 Lit/Min. Maximum head up to 180 feet. Maximum discharge up to 2000 lpm. Able to run in 200 to 415 voltage range in 3.

We offer to the clients Water Cooled Submersible Motor (1-PH), which is considered the best available in the market. Owing to their high tensile strength and consistent performance, Submersible Motor Water Cooled Motor is hugely popular among the clients.

We offer quality-approved 50 Hz Submersible Motor in diverse sizes starting from 100 mm. Our range is manufactured as per NEMA standards employing pure stainless steel under high precision. The 50 Hz Submersible Motors are highly appreciated as it is very easy to dismantle and repair them. There are no priming and suction problems. Motor Models 4� - MCIP 100/100.5/101 PRE/100/100.5/101 (Resign Cooled)6� - MATA SF C-150 SML-150 8� - MATA SF C 200 SML-200 10� - MATA SF C 10 Submersible motor are offered in different voltages and specifications : 4� 6� 8� 10� 0.5 Hp to 250 Hp Rewindable Submersible Motors  4� motors, Single-Phase up to 5.5/4.0 HP/Kw (Encapsulated & Rewindable)4� motors, Three-Phase up to 15.0/11.0 HP/Kw (Encapsulated & Rewindable)6� motors, Three-Phase up to 3.0-50.0/2.2-37.0 HP/Kw (Rewindable)8� motors, Three-Phase up to 40.0-125/37-93.0 HP/Kw (Rewindable)10� motors, Three-Phase up to 116.0-252/85-185 HP/Kw (Rewindable) Performance Rating : .5 Hp to 250 Hp Features Environment friendly CED Coating.3 Times larger lifeEquipped with special NRVHigh efficiency with long lifeStandardized NEMA head and shaft end Application Domestic water supplyOverhead tanksHome pressure boostingConstruction siteGardens/Fountains Special Features The Shakti submersible motors can be fitted on all NEMA pumps

• Type: Self-primming, Monoblock
• Brand Name: Texxma
• Application: Submersible Motor Use
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Sizes: 1/2HP, 1HP
• Feature: Long Working Life, Rust Resistance

  We Deal in 1/2hp and 1hp Self Priming Motors Mainly Used for Household Purpose.  

• Country of Origin: India
• Type: AC
• Brand Name: ROTOCON
• Phase: Single Phase
• Voltage: 220 V
• Corrosion Resistance: Yes
• Material: Copper
• Color: Black
• Warranty: 1 Year
• Finishing: Coated
• Automatic Grade: Manual
• Shape: Round
• Mounting Type: Flange
• Certification: ISO 9001:2008
• Power: 10 KW
• Number of Poles: 2 Pole
• Speciality: Easy To Use
• Usage: Industrial
• Weight: 15kg
• Water Capacity: 40 LPM
• Size (mm): 30 Mm
• Overall Length: 15-20 Inch

• Material: MS
• Finishing: Polished
• Shape: Cylindrical
• Automatic Grade: Automatic
• Power: 3KW
• Speciality: Robust Construction, Easy To Use, High Efficiency, Reliable
• Usage: Industrial
• Voltage: 220 V
• Mounting Type: Foot
• Type: DC
• Phase: Three Phase
• Country of Origin: India

Submersible motor specially designed, with the latest manufacturing techniques. Years of experience, superior design and better manufacturing have resulted into development of this range of motor. Which are efficient and reliable in operation. Strict quality assurance during the total process assure trouble free and reliability in operation requiring minimum maintenance.

• Brand Name: Metro Irrigation
• Country of Origin: Coimbatore
• Product Name: Borewell Submersible Motor
• Condition: Good
• Min. Order Quantity: As per client requirement

Feel free to get to approach us for placing orders and stay assured for timely and safe deliveries! We are one of the respected names engaged in the process of supplying quality borewell submersible motor at nominal rates.

• Certification: CE Certified
• Power: 1-3kw
• Phase: Single Phase
• Driven Type: Electric
• Pressure: High Pressure
• Structure: Diaphragm Pump
• Automation Grade: Automatic

Submersible Bare Motor: To gain a strong foothold in the market, we bring forth for our customers best quality array of Submersible Bare Motor. This motor is manufactured at our production unit by using high quality of diffusers and impellers which are made up of thermoplastic components. Our manufactured assortment of bare submersible motor meet all your borehole pumping needs replacing standard surface pumps. The design of impellers and diffusers which are used in this motor during their manufacturing process provides the best hydraulic efficiency.  

• Type: Solar
• Warranty: 24 Months
• Brand Name: RUHI
• Pressure: High Pressure
• Number Of Stages: Single-stage Pump
• Pump Type: Centrifugal Pump
• Power Source: AC Powered
• Rpm: 2800

• Country of Origin: India
• Type: Automatic
• Certification: CE Certified
• Voltage: 220V
• Driven Type: Solar
• Warranty: 1 Year

We are offering excellence in the form of Submersible Motor to enhance the buyers' content. Ours is the known organization deeply ingrained in the Palanpur(India) and make sure to reach any destination with ease.

We manufacture 4 inch , and 6 inch water lubricated cast iron motors ranging from 0.5 hp to 70 hp .

• Brand Name: Luton
• Shape: Cylindrical
• Weight: 5-10kg
• Color: Blue
• Automatic Grade: Automatic
• Speciality: Easy To Use, High Efficiency

• MOC Motor:: Upper, Lower Housing & Motor Base
• Cast Iron / Stainless Steel: Stator Shell
• Stainless Steel: Shaft
• Stainless Steel: Beaing
• Leaded Bronze in water filled Anti frictional Deep groove ball bearing in oil filled: Thrust Set

OSWAL Induction Motors for various industrial application like Machine tools, Textiles, Air Conditioning, Dairy Equipments, Crane & Hoist, Pollution control, Aquaculture & agriculture, Fertilizers, Mines & Chemicals Industry. The Range of products are standard motors, energy efficient motors, dual speed motors, cooling tower motors and other special motors designed as per customers specifications. The qualities of motors are excellent as it is manufactured under the supervision of a team of highly qualified, experienced & dedicated people of the organization.All motor shafts are of 40 C8 /EN-8 material. Motor shaft of AISI 304, 316, 431,410 & other material can be supplied on request. Shaft are having threaded centre hole for locking of pulley / gear from driving end. Motors are supplied with keys duly fitted on the shaft.All standard motors are capable of service factor 1.1 at rated voltage & frequency / or continuous duty.Rotors are of squirrel cage, aluminum die cast & are dynamically balanced with a half key to keep the vibration levels low. Motors with very low vibration level requirement for machine tool application can be given on request. Core material is low loss high grade silicon steel.All motors can withstand momentary overload of 1.6 times of rated torque, for 15 seconds without stalling.All standard motors are having deep groove radial ball bearings '(Single row)'. Deep groove ball bearings are capable of taking axial loads in both the direction in addition to the radial loads at high speed.Oil seals are provided to ensure IP - 55 protections. The rubbing action on sealing surface prevents penetration of solid contaminants /moisture into the motor. The rubbing surfaces are with appropriate surface finish. Hence rise in temperature is minimum.Noise levels of the motors are maintained as per specification in IS : 12065.Motors are tested for vibration level of normal class as per IS : 12075. Precision levels of vibration can also be given on request.Motors can withstand for starting up time 5 to 7 seconds for two starts from cold condition. For any other condition customer shall specify GD2 speed, period of acceleration. Duty cycle, speed torque curve of driven equipment & method of starting.

We are flexible enough to offer the finest and best in class Submersible Motor; we are a leading Supplier in this domain. We make sure that the payment transaction of our customers, whether online or offline, is secured with us. We accept payment through all major payment modes. Features : Energy efficient Noiseless functioning Powerful & durable

• Finishing: Polished
• Shape: Cylindrical
• Color: Blue
• Speciality: Easy To Use
• Usage: Industrial

• Name: k b l
• Product: V 4-V 6
• Product Name: kirloskar

kirlosakar submarsible pump v4-v6 prodect in avieleble 

Being a prominent name in this area of operations, we, as a Supplier, bring forth qualitative array of Submersible Pump Motor. Our payment procedure is not only easy but also safe ensuring your long-term reliance upon us. Whether it is online payment procedure, cash, bank deposits or others, we are here to guide you throughout the process.   Feature : 0.5 hp Copar rotor

• Country of Origin: India
• Voltage: 220 V
• Warranty: 1 Year
• Certification: CE Certified
• Speciality: Robust Construction, Easy To Use, High Efficiency, Reliable
• Usage: Hoist, Crane, Industrial
• Weight: 5kg, 10kg
• Water Capacity: 20 LPM, 40 LPM
• Size (mm): 10 Mm, 20 Mm
• Overall Length: 10-15 Inch, 15-20 Inch
• Brand Name: Vallabh Pumps

• Brand Name: leader

we are offering 8 " Submersible Motors. 8"LEADER Water Lubricated Motors are rewindable Upper & Lower base are available in cast iron and SS 304 or SS 316. Stator shell is of SS202 SS 304 Motor shaft is of SS 420 grade or above Flange and shaft protrusion as per NEMA standard AVAILABLE Degree of protection: IP 68 Max water temperature: 50°C StartH: Max 30 Allowable voltage variation: +6%-10% Water lubricated radial and thrust bearing Bearings: Radial &Thrust water lubricated Max depth immersion: 350m Mounting is vertical horizontal Motor cable length 3 m3 core Cooling Flow: V 0.2 MS Versions Three phase 7.5 kW to 93 kW, 380-400 Volt 50Hz Three phase 2.2 kW to 30 kW, 460 Volt60 Hz Other voltage and frequencies are also available on demand

Our company has won the trust of clients by providing excellent quality and well-designed 8 Inch Submersible Motors. These 8 Inch Submersible Motors are water filled and are suitable for 8 Inch borewell. We provide the clients with impeccable quality 8 Inch Submersible Motors that are highly energy efficient and have a very low operating cost. We offer the clients with reasonably priced 8 Inch Submersible Motors. Product Specification : Available in Three phase 15 HP to 75 HP (11 Kw to 55 Kw) Salient Features Falcon 8" submersible motors are eco friendly, wet type and easily rewindable.Pure AISI 410 / 431 S.S. grade motor shaft and outer shellUpper Hosing, Lower Housing and Motor Base are made of C.I. FG-220 /FG-250 Grade.100% pure EC Grade copper employed. Made out of which winding wire, dual coated with insulation Class-BM-45 grade silicon stampingFlange available as per NEMA standardHigh thickness LTB-4 BushWater lubricated thrust carbon bearing with heavy Tilting Pad of AISI 304 S.S. grade which ensures zero maintenance working.�Sand Proof� design of mechanical seal rings and Sand Guards protection

Varuna's high-grade Stainless Steel Pumps are anti-corrosive in nature, light in weight and have better pumping efficiency. The stainless steel pump parts are welded with automatic pulsating machine to give better surface finishing and leak-proof functioning to ensure better efficiency and consistent performance.These pumps have a long life even in sandy water area.     Salient Features   Bowl and impeller SS Material give protection against sand along with better surface finish for higher efficiency. 100% high-grade stainless steel inside and outside provides maximum reliability. Excellent life even in abrasives as well as salty water application. Light weight this makes it easy to install. Stainless Steel Construction for rust-free and hygienic water supply. Additional necking fitted on impeller allows necking to be easily replaced at time of repairing.   Application   Sprinkler and drip irrigation Civil and industries Fire fighting system Agriculture

We manufactures wide range of Submersible Pump. With the help of innovative technology and latest CNC machines Pumo Floproduces manufactures reliable and quality products. The range of Submersible pump starts from 3” Submersible water pump to 10” Submersible water pump. SUBMERSIBLE BORE WELL PUMPS WITH MOTORS These water pumps are available with CE Standards as well. The Submersible water pump range is manufactured in different type of materials and thus is divided in different types which are Stainless Steel Submersible Pump, Cast Iron Submersible Pump. In the manufacturing process all the critical components are been machined using state of art CNC machines to ensure high dimensional accuracy giving longer life to the pumps.

• Phase: Single Phase
• Power: 1 HP
• Brand Name: Sharp
• Voltage: 220 V
• Frequency: 50 Hz
• Warranty: 1 Year
• Country of Origin: Made in India
• Speed: 2880 RPM
• Usage/Application: Lift water from smaller wells
• Source: AC Supply

Applications Bore well applications in agriculture and irrigation Drip and Sprinkler Irrigation Public water supply Housing Circulating system Storage tank filling

The Submersible Motors are eco friendly rewindable, water filled, wet type. The stator windings are of water proof PVC / Polymer winding insulation enclosed in stainless steel body. Dynamically balanced rotors maintains increased life cycle and uniform clearance in bearings resulting in minimized wear and tear. The high finish thrust bearings are of unique segmented design to withstand high axial thrust load and upthrust loads and lowest friction. The motor housings, upper housings and motor base of high grade, rugged cast iron and specially treated to withstand corrosion. Mechanical seal – SiC / TiC (Optional) prevents entry of abrasive sand particles inside the motor. A large pressure equalising diaphragm with inbuilt spring load ensure safe winding temperature at varied loads. The cable leads are connected & sealed with windings. Motors arrive 100% safely pre-filled with water. For frosty conditions, water with propylene glycol is filled for operating temperatures from – 15° C. Range :  4″ Submersible Motor – 1 HP – 3 HP (1 Ph, 220 / 240V), 1 HP – 5 HP (3 Ph, 415V, 50 Hz) 6″ Submersible Motor – 3 HP – 30 Hp (3 Ph, 415 V, 50 Hz) Designed for 50 / 60 Hz operation. Full SS 304 motors available on 4″ & 6″ on request.