Abhay Ispat (India) Pvt. Ltd. Ghatkopar, Mumbai, Maharashtra

TMT bars, or Thermo-Mechanically Treated steel bars, are best described as the new generation of high-strength steel. TMT bars are known for its superior properties, such as weldability, strength, tensility and ductility.The unique ribs allow superior bonding strength between the TMT bar and the concrete. ABHAY ISPAT (INDIA) PVT. LTD. produces TMT bars that are characterized by being extremely fire, earthquake and corrosion resistant. TMT bars from ABHAY ISPAT (INDIA) PVT. LTD. are also malleable, flexible and weldable. SPECIFICATIONS SIZE Thick 8 mm - 40 mm Length 6 Meters, 9 Meters, 12 Meters GRADE IS 1786FE 415FE 500FE 550 APPLICATION DamsBridgesCoastal constructionPower plantsHigh-rise buildingsUnderground as well as raised platformsConcrete reinforcement

Hot Rolling is a metalworking process that occurs above the re-crystallization temperature of the material. After the grains deform during processing, they re-crystallize, which maintaining an equated microstructure and preventing the metalworking process from hardening.The starting material is usually large pieces of metal, like semi-finished casting products, such as slabs, blooms and billets. If these products came from a continuous casting operation the products are usually fed directly into the rolling mills at the proper temperature. In smaller operations, the material is at room temperature and must be heated. This is done in a gas or oil-fired soaking pit for larger work pieces; and for smaller work pieces induction-heating is used. As the material is worked the temperature must be monitored to make sure it remains above the re-crystallization temperature. To maintain a safety factor a finishing temperature is defined above the re-crystallization temperature; this is usually 50 to 100 °C (122 to 212 °F) above the re-crystallization temperature. If the temperature drops, the material must be re-heated before hot rolling. SPECIFICATIONS SIZE Thick 1.40 mm to 25.00 mm Width 900 mm to 2000 mm   IF SLIT COIL Thick 1.40 mm to 5.00 mm Width 101 mm to 600 mm GRADE Cold RollingTubes & PipesDeep DrawingStructural Grade. APPLICATION Transport IndustryWelded Steel Tubes & PipesCoil Rolling & DrawingLine PipeCorrosion ResistancePressure VesselsLPG CylindersAPI Grade PipesCritical Structural Application

Hot rolling is a metalworking process that occurs above the re-crystallization temperature of the material. After the grains deform during processing, they re-crystallize, which maintains an equated microstructure and prevents the metal from work-hardening.The starting material is usually large pieces of metal, like semi-finished casting products, such as slabs, blooms, and billets. If these products come from a continuous casting operation the products are usually fed directly into the rolling mills at a proper temperature. In smaller operations, the material is at room temperature and must be heated. This is done in a gas- or oil-fired soaking pit for larger work pieces and for smaller work pieces induction-heating is used. As the material is worked the temperature must be monitored to make sure it remains above the re-crystallization temperature.To maintain a safety factor a finishing temperature is defined above the re-crystallization temperature; this is usually 50 to 100 °C (122 to 212 °F) above the re-crystallization temperature. If the temperature drops, the material must be re-heated before hot rolling. SPECIFICATIONS SIZE Thick 20.00 mm to 100.00 mm Width 750mm to 2000 mm length 2500 mm to 12500 mm   IF SLIT COIL Thick 20.00 mm to 100.00 mm Width 1250 mm to 2500 mm Length 2500 mm to 12500 mm GRADE 2062 GradeBoiler Quality. APPLICATION Boiler & Pressure VesselsShip BuildingRailwaysHeat ExchangersOil & PetrochemicalsCoal & MiningGeneral & Heavy Engineering.

We are engaged in offering Hot Rolled High Tensile in different grades, as per the specifications of our clients. These coils and sheets are made from quality mild steel that is procured from authentic vendors of the industry. Available in varied thickness and width. SPECIFICATIONS SIZE Thick 4.00 mm - 80.00 mm Width 1250 / 1500 / 1800 / 2000 / 2500 mm GRADE S-355 / ST 52FE 510 APPLICATION Special PurposeBoiler and pressure vessel manufactureShip buildingPipeMachine BuildingMarine containersCoal and miningGeneral as well as heavy engineering

Corrugated galvanised sheet is a building material composed of sheets of hot-dip galvanised mild steel, cold-rolled to produce a linear corrugated pattern in them. The corrugations increase the bending strength of the sheet in the direction perpendicular to the corrugations, but not parallel to them. Normally each sheet is manufactured longer in its strong direction.Corrugated galvanised sheet is lightweight and easily transported. It was and still is widely used especially in rural and military buildings such as sheds and water tanks. SPECIFICATIONS SIZE Thick 0.16 mm to 1.00 mm Width 740 mm to 1250 mm(After Corrugation) Length up to 4800 mm GRADE -- APPLICATION ConstructionRoofingPartition

Galvanized sheet / coil is defined as a carbon steel sheet coated with zinc on both sides. Continuous hot dipping, or electro-galvanizing are the two processes used to produce galvanized sheet / coil. Generally speaking, the hot-dip process consists of passing the steel through a bath of molten zinc. The electro-galvanizing process consists of the application of zinc by electrolytic disposition. The result is a layer of zinc tightly adhering to the base metal through an iron-zinc bonding layer.A zinc coating is one of the most effective and economical methods of protecting bare steel from a corroding environment. The zinc not only serves as a barrier between the steel and the environment, it will sacrifice itself to protect the underlying steel sheet. Sacrificial or galvanic protection occurs when two dissimilar metals are in contact and coupled with water and oxygen. Zinc corrodes preferentially to the iron in steel. This protection prevents corrosion of the steel at areas not covered with zinc. Thus, the spread of corrosion from cut edges, drill holes, etc. is minimized. SPECIFICATIONS SIZE Thick 0.14 mm to 3.00 mm Width 600 mm to 1500 mm GRADE GRADESoft / HardSpangle / Skin Pass APPLICATION Automotive ApplicationsGeneral Engineering ApplicationWhite GoodsColor CoatingFalse CelinAgriculture Equipment

Cold Rolled process for better surface quality, closer tolerances lower thickness and good form-ability. Abhay Ispat is one of the biggest suppliers in cold rolled sheets. SPECIFICATIONS SIZE Thick 0.40 mm to 1.00 mm Width 1000 mm to 1060 mm(After corrugation) Length up to 10000 mm GRADE Soft & in all colours APPLICATION RoofingPartition

Coil coating is one of the most advanced techniques in continuous application of an organic coating on to a flat metal substrate in a coil form SPECIFICATIONS SIZE Thick 0.25 mm to 1.50 mm Width 600 mm to 1250 mm GRADE Soft & in all colours APPLICATION Building AccessoriesRefrigerators & coolersWashing MachinesFurnituresLights Fixtures

A cold rolled steel sheet is produced by pickling a hot coil and rolling it uniformly at an appropriated temperature to a thinner thickness. It has excellent surface configuration and superb mechanical properties for use in automobile and electronic appliance production. SPECIFICATIONS SIZE Thick 0.14 mm to 3.00 mm Width 600 mm to 1525 mm GRADE Cold Rolled Closed Annealed (CRCA)Cold Rolled Full Hard (CRFH). APPLICATION Automotive Body & ComponentsDrums & BarrelWhite GoodsPipes & TubesFurniture & Office EquipmentGeneral Engineering ApplicationConsumer DurablesEarth Moving Equipment.

Chequered Coils / Sheets with distinct design and highly slip resistant. It can be easily configured into a variety of designs and patterns as per the client’s requirement.ABHAY ISPAT (INDIA) PVT. LTD. is a leading provider of quality Chequered Coils / Sheets where quality and functionality meets beauty. We at ABHAY ISPAT (INDIA) PVT. LTD. are fully dedicated to provide you with extensive designs and quality Chequered Coils / Sheets that meet international standards. SPECIFICATIONS SIZE Thick 2.50 mm - 10.00 mm Width 1250 / 1500 mm GRADE IS 3502 / 1994 (base material as per IS 2062 / 2006 and IS 1977 / 1996) APPLICATION For protecting walls from damage while moving heavy goods.In the cement and construction industries.As steel plates to cover floors of large areas.General fabrication.Infrastructure.