AC Drive Control System Dealers in Maharashtra Nagar, Mumbai

• Material: MDF
• Shape: Rectangular, Square
• Thickness: 6 mm-25 mm
• Color: Brownish
• Pattern: Plain
• Finishing: Polished
• Density: 730-850kg/m3
• Brand Name: Alco
• Width: 1220 mm
• Length: 2440 mm

• System Components: Smoke Detectors, Fire Alarm Control Panel
• Installation Service: Yes
• Configuration: Control Panel with optional zones from 2 to 8
• Operating Voltage: 230V AC 50Hz
• Dimension: 305mm X 225mm X 85mm
• Weight: 2.5 kg
• Mounting: Wall

Features of Control Panel : In-built software to sense, receive and recognize the signals sent by the sensors During any abnormal condition or malfunction, an alarm is activated that has to be acknowledged physically and reset Available in 2 to 8 zone (areas) options SMPS power supply Software provided for monitoring and report generation and events logging LED's for individual ZONES to indicate status of respective zones Relay outputs provided for individual Zones Relay output activates in Short / Alarm condition of respective zone Relay output for hooter gets activated, when Short / Alarm condition occurs in any sensors Mute switch provided for silencing the hooter Limit switch for sensing door status (i.e. Open / Close) provided A Buzzer which beeps with hooter in Short / Alarm and Open Panel Door conditions is provided. Here, the buzzer cannot be silenced through Mute key Communication : RS485 serial port at eight baud-rate speed setting (Default 9600 bps) for interfacing with Master (PLC, PC) Optional Potential free outputs for all zones Modbus RTU interface to communicate with BMS System Display : 4x20 LCD for displaying status of all Zones LED Display status for all zones ConvertorRS 485 to RS 232 convertor available at extra costModelsAvailable in 2 Zone to 8 Zone options

• Type: Energy Saver Panels
• Weight: 4-5kg
• Color: Available In Many Colors
• Voltage: 220V
• Output Type: AC Single Phase, AC Three Phase
• Frequency: 50hz
• Feature: Easy Operate, Stable Performance
• Warrenty: 2years
• Automation Grade: Automatic

Control Panel

We lay special emphasis on the packaging so as to ensure damage-free deliveries. For this, we make use of high quality material for wrapping our products. We are associated with renowned transportation providers to ensure delivery of consignments is carried out without a glitch and in a timely manner.

• Phase: 3 Phase
• Automation Grade: Automatic
• Degree of Protection: IP54
• Operating Voltage: 415V
• Rated Current: 1000 Amp
• Body Material: MS
• Mount Type: Wall Mounted
• Power Source: Electric
• Surface Finishing: Paint Coated

neon has full-fledged expertise in solving problems related to electrical energy management. neon product are dedicated to the betterment of utilization of electrical energy. We have vast experience in the installation and commissioning of automatic power factor control system based on your controllers and allied products. We offer our experience based on this experience to you by way of providing problems of energy management related to power factor improvement..What is Power Factor(P.F.)?Power Factor (P.F.)is the ratio of active power to apparent power-i.e P.F.=KW/KVA Power Factor is the – so – to say efficiency of utilization of electrical power. It is obvious that KW =KVA X P.F. Thus for a given voltage and active power (KW), the current drawn is inversely proportional to the power factor.

• Type: Fire Alarm Control Panel
• Autoamatic Grade: Automatic

We are plc panel. Plc panel with desk & hmi unit automated panel for hydraulic system.

• Thickness: 6mm, 8mm, 12mm, 18mm
• Size: 2440mm x 1220mm

Wood Plastic Composite Board is Environment Friendly product and is made from recycled plastic and wood scraps resembles wood. The plastic protects the wood fibres from decay and decomposition whiles the wood fibers. In addition, Wood plastic composites have a greater resistance against splintering making them perfect for high traffic areas.

Control panel Suitable for two speed motors well as for VVVF drive can be manufactured as per customer’s designs. 

• Phase: Single, Three
• Voltage: 380 - 440 V
• Material: MS
• Rated Reactive Power: 10 to 200 kVAR
• Meter Type: Analog
• Surface Finish: Powder Coated
• Frequency: 50 - 60 Hz

• System Voltage: 440 - 525 V/850 V
• Filter tuned to: 5th, 7th, 11th, 13th
•  : Rated KVAR

The basic purpose of Contactor Switched Automatic Harmonic Filter Panel is centralized Reactive Power Compensation with Harmonic Mitigation. Automatic control is provided using Automatic Power Factor Control relays. The switching of individual steps is through contactors or thyristors. With thyristor switching it is possible to have panels at higher voltages (upto 690 V), and with large size of single step (108-kVAR). Based on the load variation pattern, the minimum and maximum size of steps can be determined to maintain optimum power factor. These will help partly mitigate the harmonics from the system.

Production flexibility Easy coating scale-up Interchangeable drums Fully perforated drum Aqueous and solvent designs Anti-bearding spray nozzles Automated control system User friendly operator panel Coating pan lifter available Coating pan rack available

• Phase: 3 - Phase
• Type: Low Voltage
• Voltage: 415 V
• Brand Name: Lucsam
• Usage/Application: Chemical Industry
• Material: Sheet Metal
• Frequency: 50 HZ

• Application: Power Electronics , Induction Melting & Heating Furnaces , Telecom & Lighting , Medical Electronics , Energy Meters ,EMS.

Features: SMD Designed,Microcontroller based control board for all Complex functions. PCBs are soldier in fully Automatic pick & Place robotic machine. Which will remove all errors. OPTO-isolated inputs & outputs(for high reliable operations) with LED indications & available in both 12VDC & 24 VDC. All the input & output are Carrying LED indication on mother board for quick debugging. Call register LED output for car calls & landing calls. Call register LED & call push button are on single wire,which reduce wiring. Flashing target floor register LED. Position & direction indicator in panel to monitor the car movement. 7-segment output is short-circuit protected.In a short circuit case the concerned output is shut down until problem is removed. Two tire speed control logic to avoid over travelling due to failure of floor position sensor. Supports all type of gatelocks. Auto fan operation for energy saving. Auto mode/attendant mode operation. Landing call buzzer output for attendant mode. Fireman operation. ARD possible. 110VAC interlocking safety circuit. Slow L/S,Terminal(direction) L/S & Final L/S facility. Specifications: Power Supply: 3 Phase,415VAC,50Hz,4 Wire. Controlling: Down Collective/Full Collective & Selective. Speed: Upto 1.0 MPS. Type: Car Top Reeds(3 Reeds)/All Reeds(floor Reeds). Door Operation: Auto Door/Manual Door. Floor: 3 Reeds Type:G + 7 Auto Door & Manual Door          : All Reeds Type:G + 7 Manual Door & G + 5 Auto Door.   Optional: Landing call buzzer output for attendant mode. Fireman operation. ARD possible. 110VAC interlocking safety circuit. Slow L/S,Terminal(direction) L/S & Final L/S facility.

Solar panel is the most convenient and green means of generating electricity using solar energy.We offer panels ranging from 3 Wp to 310 Wp.We provide the perfect solution for electricity generation from sunlight in an efficient and environment friendly manner by means of Solar PV Modules. Features:- High efficiency pid free mono / poly crystalline silicon solar cells. 6V, 12V, and 24V Modules available in wide range of wattages. Highly resistant to rain, water, abrasion and hail impact. Anodized aluminum frame with pre-drilled mounting holes. High impact resistant, toughened glass. High quality, dust and water proof junction box. Customised sizes / design & specifications also undertaken.

• Operating Voltage: 415 V
• Dimension: H1200 W800 D300 MM
• Type of Control Panel: ELECTRIC CONTROL PANEL
• Usage/Application: POWE DISTRIBUTOR
• Phase: 3 - Phase
• Bus Bar For Ratings: 25/5
• Rated Current: 250 A
• Body Material: MS
• Color: OFF WIGHT
• Frequency Range: 50Hz

Air compressors ManAuto - Startstop, MasterleadLag selectable Control system , with all interlocks and safeties incorporated .System capable of managing upto 3 compressors. Comprises of one Master panel and two slave panels.Optional - embedded control system with localremote HMI and communications with external systems available.Designed to meet all Class requirements

The Mo-Sys Lambda is a highly precise motion control head.Navigate through its simple, intuitive touch-screen and program a series of moves in mere seconds. It’s that easy. An all-in-one motion control & remote head designed for filmmaking that is industry-renowned for its strength, precision, and versatility. Its modular design means you can add a 3rd axis for roll capability

• Features: Fine finish,Elegant designs,Flawless quality,Easy to install,Excellent performance,Strong construction

The company has cemented its presence among the eminent Suppliers of Control Panel Board. The boards offered by us include pump control panel board, automation panel, distribution board etc. Low maintenance, long life, smooth functioning and reliability are some of the attributes of our boards. Buyers are free to place bulk orders of the boards with us and we ensure their timely execution within the promised timeframe. Details: Pump Control Panel Board is an ideal choice for both monoblock and submersible pumps. They offer protection from short circuit and overloading. The metal box is CRC sheet powder coated. Various features comprise of – digital ammeter, digital voltmeter, overload protection, under load protection, auto manual switch. The indicating lamp is of LED type and there is a push button for ON/OFF.

Ultra Servo Sachet Machine with Servo Auger Filler for Powders like Turmeric Powder, Flours, Talcum Powder, Ground Spices, and almost any fine powder.

• Size: 8x4 Feet
• Color: White
• Shape: Rectangular
• Wood Type: Hard
• Thickness: 7.5,11,17,25 mm
•  :  

An electrical panel is also called a load center. It is a metal electrical service box that accepts the main power to the home/office/service area and distributes electrical current to the various circuits within the Home/office/ Service area. Also known as: Load Center, Service Panel, Breaker Panel, Fuse Box.The distribution of power to the various circuits is protected from over-current by the use of circuit breakers or fuses. These Electrical Control Panels are widely used in different places such as Telecom sector, Oil & Gas sector, Power Sector and others as per the need of the clients. Our offered panels are available in various specifications in order to attain maximum clients' satisfaction. Moreover, these panels are delivered to the clients at reasonable rates. Sicom Sales & Engineering is a team of qualified dedicated engineering professionals having a rich experience in the field of power electronics. The company firmly believes in delivering total customer satisfaction spanning from concept todesign, commissioning to after sales service. We offers fully engineered & cost effective solutions for process Automation & controls , integrating Digital DC Drives, PLC with networking & interfacing with process computers/ HMi’s.

AC DC Distribution Boards upto 500 AMPS Single front, Double Front, Fixed, Semi Drawout, Fully Drawout fully isolated with vertical & horizontal busbar chambers or any custom built distribution.

• Phase: Three Phase
• Frequency: 50-60 Hz
• Power Source: Electric
• Sheet Thickness: 2 to 5mm
• Voltage: 220-440V
• Body Material: Mild Steel sheet
• IP Rating: IP55
• Ambient Temperature: 5 Degree Celsius