AC Drive Control System Dealers in Mhada, Mumbai

We are offering control panels. 2 zone conventional fire alarm control panel. Surface mounting with 2 detection zones and 2 sounder outputs. 318 x 356 x 92mm (h x w x d). the horizon range has been designed with both installer and end users requirements in mind. for installers, horizon offers an out of the box and on the wall solution. A combination of quick installation, an enhanced feature set and advanced programming allows installers to quickly and simply meet the demands of end user. Equipped with configurable class change inputs, coincidence detection, programmable delays to allow alarm verification and the facility to interface to larger house alarm systems. for end users, clear visible indications, easy to operate functions and a big red key to activate the control buttons, make for simple and unambiguous operation.

We are the leading Manufacturer and Supplier of efficient Fire Alarm Control Panel. The Fire Alarm Control Panel is the Central Monitoring Station where all signals are received and transmitted. It is important that the person responsible for taking action, should know exactly where and what the problem is, as soon as he receives a signal from the panel, given below are the details of how to interpret the various lights and switches on the panel fascia.

• Brand Name: A.d's
• Condition: New
• External Body Size: 9.5 Inch (w) X 5 Inch (h) X 12 Inch
• Electrical Input: 230 Vac/ 50 Hz, with Proper Earthing.
• Memory: All Settings Used in Earlier Session is Stored & Displayed When Machine is Switched On Again
• Cuffs: 5 Numbers Silicon Cuffs

Salient features:- 1)     1MMHg controlling (resolution) 2)     Single & dual cuff tourniquets are available for all surgeries. 3)     Very reliable controlling system is used for perfect pressure. 4)     Rugged compressor. 5)     User friendly interface. 6)     Feathers touch keys. 7)     Very bright indicators. 8)   Highly stable & compact power supply, hence machine Can be used   anywhere, where voltage fluctuations are more. 9)     Inbuilt memory to store earlier settings. 10) Air leakage indicator to show air leakage in the cuffs & tubes. 11) Gradual pressure settings & gradual release system. 12) Online increase & decrease of pressure, timer, exhaust. 13) Beep after each 15minuts. 14) After presetted time is complete 1 minute extra time count is provided. 15) On completion of total sited time buzzer beeps continuously but pressure will be maintained at the same level, also it will not be released. 16) Cuff pressure will not be released on power failure. 17) Can be used with inverter power supply & generator. 18) Both hardware & software based exhaust available. 19) We provide 5 numbers of silicon cuffs (life time guarantee on joins) with machine. 20) Light weight machine, easy to carry anywhere. 21) Low power consumption. 22) Can be used for all types of patients (any physical condition) 23) Lowest risk to patient when compared with other machines. Technical specifications:- 1)     Settable pressure range 50mmhg to 650mmhg in steps of 10mmhg.   2) On line setting allows online settings of cuff pressure, timer & exhaust. 3) Pressure resolution 1mmhg.   4) Timer safe mode 1 minute to 6 hours in 15 minutes steps.   5) Alarms beep after each 15 minutes, total time out, exhaust mode, &    air leakage mode.Operating modes visual indications:-   A:-air leakage in either cuffs or in the tubes.   O:-operating mode (normal operating)   T:-timer mode.   S:-setting of cuff pressure mode.   E:-exhaust mode. (Software or hardware)  

Real Time Switches are the timers which are capable to perform on off actions at real time, they are used to switch electrical appliances like corridor lights, garden lights, street lamps, neon signs etc at preproraamed time of the day. User need not programme the unit from time to time, since the timer has built in almanac timings fixed in nonvolatile RAM. This has added advantage in Real time switch over daily dial or weekly timers. RTS has two outputs, with which user can drive contractors of different ratings. Desired output can be achieved using different combinations. Timer is provided with manual override facility. To avoid unauthorized access, optional detachable external keyboard can be provided.

• Rated Current: 230
• IP Rating: IP33
• Uses,: Electronic
• Capacity Amps: 5

We own a well-structured warehouse with the help of which we are capable of delivering a flawless range of products. So, you can stay rest assured with us for damage-free products. By making use of quality packing material, we are able to ensure that the orders will remain free from damage during transit. Also, our expert packing personnel strictly check the entire lot before final dispatch.

• Reted Voltage: 12kv, 36kv, 40.5kv

Virtually maintenance free, High availability through spring charge spring operated mechanism, Single unit - easy to transport & ready to install, Simple & safe to operate, Modular construction for ease to maintain, Compact & rugged design for outdoor application, Well proven vacuum interrupters for switching functions, Long electrical & mechanical life, Adequate ground & sectional clearances as required, Suitable for rapid auto-reclosing duty

Compact, sturdy with an adaptable design Maintenance free & high reliability Total compartmentalized design. Provision of discharge flap with wire mesh Provision of safety interlocks Long electrical and mechanical life Conforms to IEC 62271-100 & 200 IEC 606094 IS 13118 Compatible for remote and SCADA operations Application Distribution Networks Industrial distribution Rapid auto-reclosing applications Switching duties for Capacitor, Motors, Auxiliary Generator Units for Power Plants

• Type: Automated Switch Panel
• Number of Button: 4

• Material: Mild Steel
• Automation Grade: Automatic
• IP Rating: IP33
• Operation Voltage: 415V
• Surface Finish: Polished
• Mounting Type: Horizontal

These conventional fire control panels form part of a comprehensive range of conventional and intelligent fire detection equipment. Compatible products include heat and smoke detectors, sounders and manual call points. The M1, 2 and 4 conventional fire control panels provide one, two and four zones (respectively) of fire detection. All panels have been designed to offer high standards of performance, reliability and quantity and comply fully with BS5839, Part 4, 1988. Each panel provides two alarm warning circuits, a power supply and a battery charger. Three state detector condition monitoring enables both open and short circuit conditions to be monitored and indicated at the panel whilst responding to a fire signal at different level. The system can maintain the operation of manual call points after the removal of detectors. The M1 includes an open collector type common fire output whilst the M2 and M4 feature common fire and fault voltage free, changeover contacts. An enabling security key switch prevents unauthorised operation of the panel controls.   FEATURES • Robust, moulded housing and steel back box. • Three state detection with isolate and test facilities on 2 and 4 zone models. • Designed to meet BS5839, Part 4, 1988. • Two fully monitored sounder circuits. • Head removal monitoring with active end of line units included. • Fire and fault relays on 2 and 4 zone models. • Space for 72 hour stand-by batteries. • One cabinet size for all models.   SPECIFICATION mechanical Dimensions (HxWxD): 290 x 350 x 89 mm Weight: 4 Kg (9 lbs) Operating temperature: 0°C to +49°C Humidity: 10% to 93% non-condensing electricalOperating voltage: 230 Vac 50Hz Zone voltage: 17 to 28 Vdc Zone quiescent current: 2.4mA Zone End of Line Device: Active End of Line (supplied) Number of Sounder Circuits: 2 - monitored for open and short circuits. Sounder circuit voltage: 17 to 28 Vdc Max. panel sounder circuit current: Single zone: 300mA Two & four zone: 1A Common Fire Output (remote): M1 - open collector M2 - changeover contact M4 - changeover contact Auxillary input: Class change input Standby batteries: Standby hours: 24 Single zone: 1.2Ah Two zone: 1.9Ah Four zone: 2.8Ah Standby hours: 72 Single zone: 2.8Ah Two zone: 7.0Ah Four zone: 7.0Ah

Banking on the expertise and acknowledgement of our trained experts, we are readily instrumental in the arena of offering a neatly stitched variety of Semi Automatic Control Panel. Features : Corrosion resistance Industry approved designs Seamless built Robust construction Precisely designed Durable nature

We manufacture a wide range of starter control panels, mcc panels, junction boxes. Panels are tailor made to suit the requirements of each customer and the site conditions. We are distributors located in Mumbai for a wide range of Xylem Flygt submersible, dewatering, slurry, sewage pumps and submersible mixers. Flygt is the flagship brand of Xylem and the worlds no 1 submersible pump manufacturer. We have standard Flygt pumps in ready stock. Our service technicians ensure local service backup in India for these highly sophisticated Flygt pumps. Our repair workshop at Chiplun, India has facilities to repair Xylem Flygt submersible pumps and mixers.  

We are offering power control center(pcc). Types Power Control Center is normally Single Front with rear access for termination. However Single Front with Closed back, Double Front are manufactured as per requirements. Construction Manshu offers Modular Panels for Power Control Centre. The modular design has, Frame, Base, Doors, Cover, etc. and all are removable, changeable. 1. Main Body is made from M6h Structure frame: Color: Satin black 2. Base: 75 mm ISMC Color: Satin black 3. Doors: 1.5mm. Color: Siemens Grey RAL7032 Powder Coated 4. Mounting Plate: 1.5/2 mm thick, Color: Orange Powder Coated 5. Locks: Cam lock 6. Gasket: Liquid polyurethane foam continuous type suitable for indoor and outdoor applications 7. Indication & Meters: As per requirements. 8. Switchgear: All available makes are used in Panels. 9. Busbars: Aluminum or Copper Rigid or flexible busbars are used. Frame Frame is made of M6h design multi fold construction. This offers very high strength which is required for heavy components like Air Circuit Breaker, Copper Busbars etc. Also, this takes care during short circuit condition against various mechanical distortion forces. Base Base is made of 75mm ISMC channel. Modularity This is the main feature of Manshu’s panel. All vertical and horizontal frame members have Punching at 25mm pitch. This gives large flexibility during design, manufacturing and eases modification at site if required. Advantages Panel is very flexible. Expansion is very easy on both sides of Panel and can be expanded at Rear & Top in our factory as well at site. Enclosure Sizes Width of each section is from 300 to 1200mm, Height 2000 or 2300 mm + Base and depth is from 600 to 1600mm. Ingress Protection IP 32 and IP 42 are most suitable for good ventilation, however, IP 54 is also offered. Designing Manshu’s design centre works on every part of entire panel including Busbar design Fabrication design, CNC cad-cam design in-house for every order. Testing Facility All facilities are available In-house. Type Tests Panels are tested at CPRI and ERDA for 65kA for 1 sec, 50kA for 1 sec, IP 55, IP 56 IP 67. Largest Size Panel Executed 1. Incomer 6300A, 85kA for 1 sec. Length 10450mm. Tinned Copper Busbar. 2. Incomer 5000A, 65kA for 1 sec. Length 23000mm. Double Aluminum Busbar. 3. Incomer 4000A, 65kA for 1 sec. Length 18000mm. Maximum Size of Panel We can manufacture any length of panel. However in our factory we can assemble 45000mm panel for testing.

It is the inherent philosophy of RECHNER to ensure that all our products are engineered to excellence and are at par, if not better, than the best in the industry.We also offer a wide variety of off the shelf standard drives and standard drive packages.We can also provide you with spares and replacement parts to keep your equipment running at peak performance.

Medium density fiberboard is the newest development in the wood panel industry. It is made from wood and other lignocelluloses materials, refined into fibers and reconstituted with a resin binder which is carried out at elevated temperature and pressure, and then sanded to uniform and precise thickness to get best quality plain and prelaminated MDF boards. Our entire range of Medium Density Fibre products conforms to BIS standards and bears the ECO MARK.

• Features: Microcontroller based Digital Circuitry. Continuous Time display. Dust proof membrane keypad. Upto Three built in relay outputs rated 230 V / 5 A. Easy to Install. User friendly and Easy to Operate.
• Display: 4 digit LED display.
• Battery back up: 10 years
• Override Switch: Manual
• Size: 96(W) x96(H) x 100(D) mm

• Type: C Heater Climate Control Panel Switch
• Certification: CE Certified, ISO 9001:2008
• Color: Black
• Condition: New
• Driven Type: Battery
• Application: For Car

We are offering hydraulic press control panel. Hydraulic press was controlled for it’s stroke to control thickness of product. Stroke accuracy was achieved within +- 20 microns in product thickness of 8 mm to 40 mm. Product thickness was settable. Panel was also controlling pressure, mould activities, product ejection, product transfer etc. Linear scale was used for stroke measurement. All the press problems were taken in to consideration while designing the system.

Solar Power Panel, Aluminium Door, Aluminium Grill, aluminium railing

stainless steel panel board, Kitchen Trolly, kitchen drawer, Modular Kitchen

control panel accessories, Clutch Bag, Jewelry Box, Ladies Hand Bag

vacuum circuit breaker panel, Vacuum Circuit Breakers, kiosk systems

automatic tempertature control systems

Access Control System, Burglar Alarm System, cctv, Fire Alarm System

control panel accessories

APFC Panel, power factor correction panels, Bus Duct

Automation System, Ozone Generators, Ozone Generator, Oxygen Generator PSA

crane control panel, electric cranes, Workstation Crane

Access Control System, Biometric Attendance System, Boom Barrier