AC Drive Control System Dealers in Trombay, Mumbai

neon has full-fledged expertise in solving problems related to electrical energy management. neon product are dedicated to the betterment of utilization of electrical energy. We have vast experience in the installation and commissioning of automatic power factor control system based on your controllers and allied products. We offer our experience based on this experience to you by way of providing problems of energy management related to power factor improvement..What is Power Factor(P.F.)?Power Factor (P.F.)is the ratio of active power to apparent power-i.e P.F.=KW/KVA Power Factor is the – so – to say efficiency of utilization of electrical power. It is obvious that KW =KVA X P.F. Thus for a given voltage and active power (KW), the current drawn is inversely proportional to the power factor.

• System Components: Smoke Detectors, Fire Alarm Control Panel
• Installation Service: Yes
• Configuration: Control Panel with optional zones from 2 to 8
• Operating Voltage: 230V AC 50Hz
• Dimension: 305mm X 225mm X 85mm
• Weight: 2.5 kg
• Mounting: Wall

Features of Control Panel : In-built software to sense, receive and recognize the signals sent by the sensors During any abnormal condition or malfunction, an alarm is activated that has to be acknowledged physically and reset Available in 2 to 8 zone (areas) options SMPS power supply Software provided for monitoring and report generation and events logging LED's for individual ZONES to indicate status of respective zones Relay outputs provided for individual Zones Relay output activates in Short / Alarm condition of respective zone Relay output for hooter gets activated, when Short / Alarm condition occurs in any sensors Mute switch provided for silencing the hooter Limit switch for sensing door status (i.e. Open / Close) provided A Buzzer which beeps with hooter in Short / Alarm and Open Panel Door conditions is provided. Here, the buzzer cannot be silenced through Mute key Communication : RS485 serial port at eight baud-rate speed setting (Default 9600 bps) for interfacing with Master (PLC, PC) Optional Potential free outputs for all zones Modbus RTU interface to communicate with BMS System Display : 4x20 LCD for displaying status of all Zones LED Display status for all zones ConvertorRS 485 to RS 232 convertor available at extra costModelsAvailable in 2 Zone to 8 Zone options

We are offering multi protocol fire alarm control panel. the zx1e is an intelligent fire alarm control panel. It has been designed and constructed around proven and reliable microprocessor technology. This simple approach has produced a modular, scaleable fire alarm platform suitable for protecting all types of premises. The zx1e control panel supports a total of five industry leading protocols, allowing fire detection devices to be independently selected based on performance or aesthetic appeal. The zx series control panels seamlessly integrates with apollo (xplorer, xp95 & discovery), hochiki esp, nittan, morley-ias and system sensor detection device protocols. Designed for maximum flexibility the zx1e control panel is supported by a complete suite of peripherals and software tools. Information on the location of fires, faults and system status can easily be displayed or printed in multiple locations. Integration to voice evacuation systems, paging systems and third party control systems is supported through a range of peripheral interface units. features: multi protocol modular concept simple, robust design intuitive to use easy to maintain easy to expand easy to network easy to install easy to configure

• Size: Available in many sizes
• Material: Cement Board, Wood
• Shape: Rectangular
• Application: Dry Wall Partition, False Ceiling.
• Thickness: 15-20mm

From mass to retail requirement fulfillment, we can do it all. Our organization has a widespread trading system to offer our patrons with the goods all year round and make scheduled delivery. Development of modular control inside our warehouse helps in proper organization of the products and ensure complete safety while storage. The entire system is properly managed by our warehousing experts.

We are plc panel. Plc panel with desk & hmi unit automated panel for hydraulic system.

Control panel Suitable for two speed motors well as for VVVF drive can be manufactured as per customer’s designs. Features of Control Panel for EOT Cranes :- Durable- Easy installation- Shock proof- Safe usage- Vast application- Robust construction- Custom made control panel for cranes

Control Panel

Technokaar solutions & services provide electronic access control system to protect your organization, offices, public buildings,hospital,the retail sector, school & colleges etc.our products/solutions are used by various companies to achieve greater profitability.

Production flexibility Easy coating scale-up Interchangeable drums Fully perforated drum Aqueous and solvent designs Anti-bearding spray nozzles Automated control system User friendly operator panel Coating pan lifter available Coating pan rack available

• Phase: 3 Phase
• Automation Grade: Automatic
• Degree of Protection: IP54
• Operating Voltage: 415V
• Rated Current: 1000 Amp
• Body Material: MS
• Mount Type: Wall Mounted
• Power Source: Electric
• Surface Finishing: Paint Coated

• Type: Energy Saver Panels
• Weight: 4-5kg
• Color: Available In Many Colors
• Voltage: 220V
• Output Type: AC Single Phase, AC Three Phase
• Frequency: 50hz
• Feature: Easy Operate, Stable Performance
• Warrenty: 2years
• Automation Grade: Automatic

• Phase: Single, Three
• Voltage: 380 - 440 V
• Material: MS
• Rated Reactive Power: 10 to 200 kVAR
• Meter Type: Analog
• Surface Finish: Powder Coated
• Frequency: 50 - 60 Hz

• Thickness: 6mm, 8mm, 12mm, 18mm
• Size: 2440mm x 1220mm

Wood Plastic Composite Board is Environment Friendly product and is made from recycled plastic and wood scraps resembles wood. The plastic protects the wood fibres from decay and decomposition whiles the wood fibers. In addition, Wood plastic composites have a greater resistance against splintering making them perfect for high traffic areas.

• Type: Fire Alarm Control Panel
• Autoamatic Grade: Automatic

We are supported by an advanced packaging system and make use of only high quality packing materials for ensuring complete safety during handling, warehousing and transit. Buyers prefer us for our practice of delivering the orders within the pre-decided time frame.

• System Voltage: 440 - 525 V/850 V
• Filter tuned to: 5th, 7th, 11th, 13th
•  : Rated KVAR

The basic purpose of Contactor Switched Automatic Harmonic Filter Panel is centralized Reactive Power Compensation with Harmonic Mitigation. Automatic control is provided using Automatic Power Factor Control relays. The switching of individual steps is through contactors or thyristors. With thyristor switching it is possible to have panels at higher voltages (upto 690 V), and with large size of single step (108-kVAR). Based on the load variation pattern, the minimum and maximum size of steps can be determined to maintain optimum power factor. These will help partly mitigate the harmonics from the system.

Replacement for Alpha Laval controllers upto EPC400.Kit supplied for converting a complete Manual Separator into a full fledged , Auto operation Separator with all the features of an EPC400. Easy serviceability.All parameters settable .Graphical mimic with status indicators provided on the front panel .

• Features: Fine finish,Elegant designs,Flawless quality,Easy to install,Excellent performance,Strong construction

plc automation, Binocular Microscope, night vision binoculars

• Phase: Three Phase
• Type: Medium Voltage
• Material: Sheet Metal
• Rated Current: 250 Ampere
• Rated Voltage: 415 V
• Usage/Application: Motor Control
• Breaking Capacity: 50kA
• Brand Name: L&T

Mika has been pioneers in manufacturing of Control Panels since 1990. We are one of the leading manufacturers of Control Panels. We are engaged in this activity since 1986 and manufacture MCCs, PCCsDBs, MIMIC, MIMIC PANELS, INSTRUMENTATION PANELS, PROCESS CONTROL. PANELS, PLCs, FEEDER PILLARS, ETC. As an established name for Control Panel Manufacturer we have our regular supplies to Railways, L&T, BHEL,PGCIL, Andritz, Siemens,Jyoti to name a few. Mika panels are tested for degree of protection test ,Short circuit test,  temp rise test. All these testing is carried out at NABL labs.   Our panels are tested for IP-55 and IP-54 degree of protection test as per IS 2147 at MIs. Genelac Limited who have the necessary testing facilities. Our panels are also tested For humidity test at E.R.T.L.(W) for testing the quality of paint and painting process. The panels are also tested for short circuit test of 50 KA.(RMS). for 1 sec. at C.P.R.I.Bhopal.   We have complete manufacturing facility such as fabrication shop equipped with complete fabrication machinery, tools and dies required for fabrication, 7 tank painting process plant, wiring assembly and testing facility.   Motor control centers   Power control centers   Distribution boards   Instrumentation panels   Process control panels   Programable logic control panels   Mimic panels   Bus ducts

• Features: Exact dimensions,Reliable,Precise

• Brand Name: Arun & Sons
• Application: Industrial
• Power Source: 0-200MVAC
• Model Name/Number: 34A (AC)
• Dimension: 48*96*110 MM
• Resolution: 1 In 1999 Except
• Sampling Rate: 2.5 Sample /Second

AC DC Distribution Boards upto 500 AMPS Single front, Double Front, Fixed, Semi Drawout, Fully Drawout fully isolated with vertical & horizontal busbar chambers or any custom built distribution.

• Brand Name: Agni
• Product Type: conventional
• Zones: 1/2/3/4/5/6/7/8
• I Deal In: New Only
•  :  

We have established ourselves as the prominent manufacturer, exporter and supplier of the premium quality Electrical Control Panel that is especially designed by our experts as per the needs of the customers. Our Electrical Control Panel is widely used in various industries in all the major parts of the world. Features DurableReliable resultsRequires minimum maintenance Known for Preventing the leakage of current flowing through itEnsuring the safety of the user

An electrical panel is also called a load center. It is a metal electrical service box that accepts the main power to the home/office/service area and distributes electrical current to the various circuits within the Home/office/ Service area. Also known as: Load Center, Service Panel, Breaker Panel, Fuse Box.The distribution of power to the various circuits is protected from over-current by the use of circuit breakers or fuses. These Electrical Control Panels are widely used in different places such as Telecom sector, Oil & Gas sector, Power Sector and others as per the need of the clients. Our offered panels are available in various specifications in order to attain maximum clients' satisfaction. Moreover, these panels are delivered to the clients at reasonable rates. Sicom Sales & Engineering is a team of qualified dedicated engineering professionals having a rich experience in the field of power electronics. The company firmly believes in delivering total customer satisfaction spanning from concept todesign, commissioning to after sales service. We offers fully engineered & cost effective solutions for process Automation & controls , integrating Digital DC Drives, PLC with networking & interfacing with process computers/ HMi’s.

Solar panel is the most convenient and green means of generating electricity using solar energy.We offer panels ranging from 3 Wp to 310 Wp.We provide the perfect solution for electricity generation from sunlight in an efficient and environment friendly manner by means of Solar PV Modules. Features:- High efficiency pid free mono / poly crystalline silicon solar cells. 6V, 12V, and 24V Modules available in wide range of wattages. Highly resistant to rain, water, abrasion and hail impact. Anodized aluminum frame with pre-drilled mounting holes. High impact resistant, toughened glass. High quality, dust and water proof junction box. Customised sizes / design & specifications also undertaken.