AC Motors Dealers in Mumbai

• Warranty: 1year
• Power: 10-100 KW
• Brand Name: Modern General Sales
• Usage/Application: Industrial
• No of Phase: Three Phase
• No of Poles: 2
• Temperature: Limited to 40 Degree C
• Range: 5 Watts to 30 Watts

• Type: AC
• Brand Name: ABB
• Phase: Three Phase
• Voltage: 415V
• Shape: Round
• Mounting Type: Flange
• Power: 0.5-20HP
• Speciality: Easy To Use, High Efficiency, Reliable
• Usage: Industrial
• Efficiency: IE2
• Frequency: 50Hz
• Ambient Temperature: 50
• IP Rating: IP55
• MOQ: 1

When three phase potential is applied to the stator winding a rotating magnetic field will travel around the inside of the stator core in indentically the same manner as in a squirrel cage induction Motor.  The speed of the rotating magnetic field is dependent on the number of stator poles and the frequency of the supply source. This synchronous speed is found using the formula S = 120F ÷ P. As the rotating field travels at synchronous speed, it cuts the wound rotor winding and induces voltages in these winding. On starting, all the resistance of Rotor resistance starter is inserted in the circuit.  With the increase in resistance in the Rotor circuit the impedance increases and therefore it might appear as though the rotor current would be less with the a resultant decrease in torque.  This results in maximum interaction between the two field and a strong starting torque. As the motor accelerated, steps of resistance are cut out of the Rotor resistance starter controller with all resistance cut out, the rotor slip ring are short circuited and the motor operate at rated speed in the same manner as a squirrel cage induction Motor. "MOTCO" group provides AC Drives of Siemens & ABB along with its complete control panel with MCB, indications, meters, push buttons & contactors enclosed in powder coated cabinet

• Type: Gearboxes

panasonic geared motors are built to order from our extensive stocks of motors and gearheads. Panasonic ac geared motors comprise a totally enclosed standard motor with grease lubricated bearings and a grease filled gearbox, neither of which will require amp 1.6 a   bearing type ball bearing   capacitor 7uf(450v)   frame size 90mm   frequency 50/60hz   hp 0.1206   kw 0.09   rpm 90 to 1400   shaft type round shaft   starting torque 0.72 nm   temperature rating 10 ~40 degree c   voltage single phase:- 230 v ac  

• Operating Temperature: - 40 to + 40C
• Net Weight: 860 Grams

Motor Design: Shaded Pole Motor, Housing : Aluminium Die- cast, Bearing: Sleeve Bearing ( Self Lubricating ), Operating Voltage : 115V (85 ~ 125 VAC), 230V (185 ~ 245 VAC), Dielectric Strength : AC 1500V for 1 minute, Insulation : Class B, Insulation Resistance : Above 100M Ohms at 500 VDC, Connection : W = Lead Wire

The use of frequency inverter enables a continuous control of the motor speed and provides constant torque in the whole speed range. The rating for variable speed induction motors need to be selected based on the following aspects: Heating due to harmonic content of inverter waveform. Reduced ventilation due to low speed operation. Constant torqueConstant Power Variable torque requirement of load. Other limiting factors e.g. maximum permissible motor speed, ambient temperature, altitude etc. While variable speed drives provide highest energy saving for variable torque (Centrifugal pump, fan) applications, for constant torque and constant power application, Variable speed drives offer significant process control improvements. Basic inverters permit operation over a typical 20:1 speed range. With closed loop vector control the effective range may be increased to 1000:1.

We are offering dual speed motors.

• Ratings: Supply
• Mounting: 3,000 to 20,000 kW
• 2000 to 13800 Volts: Horizontal
• 10 to 48 Pole: 50 or 60 Hertz

Totally Enclosed Fan Cooled (TEFC) Totally Enclosed Water to Air Cooled (TEWAC) Open Drip Proof (ODP) NEMA WP-II

• Voltage / Frequencyion::   415V ±10% / 50 ±6%
• Three Phase Motors:  
• Specification::  
• Rating: 0.12 TO 90 KW
• Frame Size: 63F TO 280M
• RPM: 3000 , 1500 , 1000 , 750
• Construction: (B3) FOOT , (B5) FLANGE , (B14) FACE and Combination
• Voltage / Frequency: 415V ±10% / 50 ±6%

Terminal Box Terminal box can be rotated in the step of 90 through 360° for desired cable entries Bearings Deep groove radial ball bearings for longer life.  Protection IP-55/44 by means of `V' ring seals and oil seals to prevent penetration of solid contaminants / moisture into the motor. Winding Wound with “F” class wire and impregnated with “F” class varnish Electric supply &variations 415V ±10%, 50Hz ±5% and combined variations ±10% unless otherwise specified.  

ADTRON’S A.C. Tachogenerator demonstration unit is a versatile unit which includes a D.C. Motor and an A.C. Tachogenerator coupled to it Provision is made to observe the A.C. voltage on C.R.O. and the same can be measured on the display provided. TECHNICAL SPECIFICATIONS 1. D.C Motor : Bi-directional, Foot mounted. Rated Speed : 2500 rpm. Input : 0 – 12V D.C. Output : 0 – 2500 rpm. 2. A. C. Tachogenerator : Rated Speed: 4000 rpm. Input : Shaft coupled to rotating element Output : 20 V. at 1000 rpm. Current : 5 mA. Shaft Length : 30 mm. 3. Display : 3½ digit L.E.D. Display.

Poised to achieve leadership in electrical engineering industry, Applied Electricals and Electronics is one of the most reputed manufacturers of quality AC Synchronous Servo Motors, Servo Voltage Controllers and OTS Controllers. The company boasts of a strong technical force, advanced production equipments and stylish designs.

With having years of experience in the domain, we are engaged as manufacturer, supplier, wholesaler and distributor of Right Angle Hollow Shaft Reducer Geared Motor. This motor is available in numerous diameters and finishes; the provided motor is used to interconnect two different moving parts. Thus, the demand for such motor stays always at high from the manufacturer of automotive products, precision machinery and parts. Further, the provided motor can be availed according to the specifications provide by the clients to us. Features: Robustly constructed Rugged design High efficiency High functionality

• Type: Ac Synchronous Motors
• Application: Servo stabilizer, valve actuator, packaging machines,printing machines
• Weight: 10-20kg
• Color: Blue
• Voltage: 220V
• Condition: New
• Automatic Grade: Manual
• Power: 9-12kw
• Driven Type: Electric
• Phase: SingleTwo
• Current Type: AC
• Speed: 60rpm
• Country of Origin: India
• Brand Name: Pro-Syn
• Frequency: 50
• Efficiency: 50%
• Continuous Current(A): 0.1-3A

• Type: Automatic
• Certification: CE Certified
• Application: Air Conditioner
• Voltage: 220V
• Power Type: AC, DC
• Power Source: Electrical
• Warranty: 1 Year
• MOQ: As per Client Requirement

• Power: 9-12kw
• Voltage: 220V
• Weight: 90-100kg
• Phase: Single Phase

• features: Near uniform efficiency from 50% to 100% of full load

Use of these motors can lead to substantial reduction in energy costs. The payback periods are in the order of 3 to 6 months depending upon the usage. Replacing existing motors with High Efficiency IE2 Motors even in power intensive industries gives a payback within 1 to 2 years.

Built in accordance with IEC 60034-1 IS 325 standards, we offer customized, energy efficient and intelligent motors for various applications in IP23, IP55, IP56 and IP65 enclosures. We offer a wide range of cooling systems ranging from Self Circulation type (IC611) to independent forced circulation circuits (IC616), water cooled (IC8A1W7) and Tube Ventilated (IC511) to fin cooled (IC411) types. The motors offered ranging from Open Air Circuit (IC01) and Closed Air Circuit (IC611) to independent externally fed air circuit (IC616). These are designed for optimum performance in adherence with application and site requirements of performance and space.

• Country of Origin: India
• Driven Type: Electric
• Phase: Single Phase

The Industrial PMDC Motors manufactured by us are powerful and compact. These motors are ideal to be used in Packaging Machinery, Winding Machine, Printing, Textile, Conveyors, Pumps, Pharmaceutical, Coding Machines, Plastic Machinery and Vacuum Circuit Breaker.